The capacity is still the same Demo! ;) Just has lower voltage! You now have 2500 mah 2s battery Edit: those cell 2500 mah cells are wired in series to increase voltage! Would be different if they were wired in parallel
I just want to say thanks and show you some appreciation. With your video I was able to save my damaged battery. Although it will be less voltage I can still use it! 👍🏽👍🏽👍🏽🤙🏽
It's good practice to drain the battery as low as safely possible before doing a job like this in case of a fire. The more these lipos are charged the bigger fire they make, if they do combust. Good video though.
It’s safe enough to do just done this to a pack of mine. I’d drain it to 3volts per cell first. And make sure the front door it’s unlocked incase you need to leg it
Hey Demo old mate , Aleksander beat me to the punch. Yes the lipo is still 2500 mah even it was one cell, 1s, it still would be 2500 mah. You've been caught out man, one point to me and zero to you ha ha. Anywhooo keep up the good work. Cheers Stew.
Don't worry, I made the same mistake when I first started splitting old packs up to make a newish one's etc. The difference was didn't tell the world out there via RUclips, ha ha. Score even now. Cheers Stew.
@@7demo7review thanks, also what if i plug it in 3s port? it would still charge right? cuz i dont feel like cutting off the edge of the balance plug...so i dont accidentally mess it up
Is it possible to cross the terminals to loose the mah but keep the voltage? Bought a 900g battery for RC plane 6000mah don't think the thing is gonna go airborne with the weight!
![Save the lipo - Repair LiPo battery pack [remove dead cell] [4s to 3s conversion]](/img/1.gif)
The capacity is still the same Demo! ;) Just has lower voltage! You now have 2500 mah 2s battery
Edit: those cell 2500 mah cells are wired in series to increase voltage! Would be different if they were wired in parallel
Came to say this - a 2500mAh 3S1P pack is three 2500mAh cells in series, not three 833mAh cells in parallel!
Yeah the Mah stays the same. The total Watt hours drops from 27.75 to 18.5.
+Aleksander Hesbø ahhhh,,, darn it!!! You’re right,,, I’ll put a notation in the description!
Thanks for the note- Ill re- edit and repost the video...
Yup--- good catch... I'll repost this video with a correction..thanks!
One of the best ideas I have seen for separating cells is to use dental floss to separate the cells without damaging them.
Fraser Steen I do a Little rubbing alcohol for lube.
I just want to say thanks and show you some appreciation. With your video I was able to save my damaged battery. Although it will be less voltage I can still use it! 👍🏽👍🏽👍🏽🤙🏽
It's good practice to drain the battery as low as safely possible before doing a job like this in case of a fire. The more these lipos are charged the bigger fire they make, if they do combust. Good video though.
Thanks brother. Thanks a lot for saving my efforts
may i ask what type of protective plastic for that protective coatings?
i'm gonna make a split lipo for my airsoft as the pre-split is pricey as hell
It’s safe enough to do just done this to a pack of mine. I’d drain it to 3volts per cell first. And make sure the front door it’s unlocked incase you need to leg it
Hey Demo old mate , Aleksander beat me to the punch. Yes the lipo is still 2500 mah even it was one cell, 1s, it still would be 2500 mah. You've been caught out man, one point to me and zero to you ha ha. Anywhooo keep up the good work. Cheers Stew.
+stewjade your totally right.... back to the drawing board,,, lol. I may take this video down and add a note about the mah
Don't worry, I made the same mistake when I first started splitting old packs up to make a newish one's etc. The difference was didn't tell the world out there via RUclips, ha ha. Score even now. Cheers Stew.
@@stewjade so what changed? Voltage dropped
Karan Karnik yes indeed, in this case 1s would be 3.7 volts, 2s 7.4 volts and so on but all 2500 mah.
so u charge it in 3s port like before or 2s port?
2s port
@@7demo7review thanks, also what if i plug it in 3s port? it would still charge right? cuz i dont feel like cutting off the edge of the balance plug...so i dont accidentally mess it up
thank you
Would have good to maintain the macro focus to be more clear of each step.
Hey Jeff, good video except your math is a little off, lol, it’s still the same capacity just lower voltage. 👍😎
Yup,,,, I'm going to re upload the video with a note in the beginning and cut out the parts where I talk about compacity,,,
Is it possible to cross the terminals to loose the mah but keep the voltage?
Bought a 900g battery for RC plane 6000mah don't think the thing is gonna go airborne with the weight!
Really like that satanic numerology there!
my dose my 3s lipo have 6 cells