How to Replace Rear Brake Pads and Rotors 2006-2011 Cadillac DTS
HTML-код
- Опубликовано: 18 окт 2024
- Buy Now!
New Brake Pads from 1AAuto.com 1aau.to/ib/1ABP...
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2006-2011 Cadillac DTS.
This process should be similar on the following vehicles:
2006 Cadillac DTS
2007 Cadillac DTS
2008 Cadillac DTS
2009 Cadillac DTS
2010 Cadillac DTS
2011 Cadillac DTS
Tools you will need:
• Pry Bar 1aau.to/ob/1AXA...
• 14mm Socket 1aau.to/ob/1AXA...
• 15mm Socket 1aau.to/ob/1AXA...
• 19mm Socket 1aau.to/ob/1AXA...
• Brake Caliper Hanger 1aau.to/ob/1AXA...
• 3/8 Inch Air Impact Gun
• 1/2 Inch Ratchet 1aau.to/ob/1AXA...
• 1/4 Inch Ratchet 1aau.to/ob/1AXA...
• 3/8 Inch Drive Ratchet 1aau.to/ob/1AXA...
• Torque Wrench 1aau.to/ob/1AXA...
• Brake Grease
• Gloves 1aau.to/ob/1AXS...
• Safety Glasses 1aau.to/ob/1AXA...
Subscribe: / @trq
Check out our playlist:
Cadillac DTS 2006-2011 1st Generation: • Cadillac DTS 2006-2011...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
You're a life saver man. Appreciate the video.
They make torque sticks so you can torque the tire down properly you don't have to use a torque wrench just saying
Do you spin both rear caliper pistons in clockwise or is the other side counterclockwise?
Is ot the same for an SRX?
I like using my Mountain flex head reversible ratcheting wrenches.
yeah, that's messed up 1 can't use a socket on bottom bolt (of caliper) unless maybe transition to universal and ext. but thanks well done, cheers
your alright, semi- thorough, not bad for an armature/half pro, cheers, thanks if you need ore help on processes and technique . just message me.