FOR THOSE ATTEMPTING TO REMOVE THE STOCK FLASHER UNIT... Mine was a bit of a bitch to get out because I didn't know that there's a lock tab on it. The tab is unfortunately facing the opposite side you can physically see (toward the engine). Because the tab is not facing you, you can't easily tell it even has one and it's hard to feel it with your fingers. I ended up just pulling so friggen hard that the lock tab "just let go". Oddly, the new LED flasher I installed had no lock tab whatsoever, so it should just pop out easily when it needs replacing (like every other car I ever owned). Hope this helps you to not struggle.
Hey dude, if you happen to see this and remember, can you describe the lock tab any more? Like if you could tell if I should push/pull/etc and really specifically where it is on the relay since we can't see that side.
THANKS A MILLION PETER FOR THIS VIDEO, IT HELPED ME SOLVE THIS PROBLEM ON MY GIRLFRIENDS CAR JUST CAME FROM THE STORE AS WE SPEAK FOR A NEW RELAY SWITCH IT IS WORKING FINE NOW I WAS LOOKING IN FRONT THE CAR WHO WOULD OF THOUGHT IT WAS UNDER THERE THANKS MAN APPRECIATE IT
I know this is an older video at this point, but what do I do if my flasher is stuck? It's the same exact flasher you have, no clips or anything holding it down, and it won't come out. I've tried going for broke and clamping a pair of channel locks on it and trying to pry it out. The relays around it were very stuck in when I first removed them as well but a good tug with the channel locks popped them out. I've been tuggin on my flasher off and on for three days and still it won't budge. Does anyone have any ideas?
Hi Peter your videos make my 2000 ae111 corolla happy, i have a question when i pull my wiper switch it makes blow water but not make wipe automaticly recently this happens before that when i pull switch that make blow water and wipe several times automaticly my question is where is wiper relay on ae111 corolla thank you
hi there, i drive a Toyota tazz 2000 model. My turn signal and hazards go on and off, can it be my flasher relay? The turn signal flicks but stops while car is still turning, and hazards will go on and off when car is parked when testing them.South Africa.
How do you fix signal and hazard lights not flashing on a 2003-2006 Toyota Corolla??? It suddenly will not flash, only front yellow lights turn on but not flash. Please help!
2001 e11 Corolla... hazards will not stop flashing I have found the relay under the kick panel right night side of accelerator. Will not budge. There are three pin like areas I have pushed them all no release. Very difficult area to access have tried good force. Still no release. Very frustrating.
Peter, I'm about to change over to an electonic flasher unit to handle LED bulbs in my Camry, so I want to ask if you're sure the flasher unit is in this same area on a 1999 Camry? My Haynes repair manual sort of says it's behind the gauge cluster. I'm old, so I don't want to be upside down on the floor for a long time to find out it's not there.
When i turn on left blinker dosent blink on dash,but i does work outside,when i turn on my rear defroster left blinker stays on?...only right turn signal works(blinks).
Hello.Good video.I have an aftermarket car alarm and I want to connect it to the flasher with a wire so when the alarm is on to have the hazard lights on to,do you think it's possible? relay flasher has 3 pins,can I put the wire on all 3 pins and put back the flasher and then try the alarm if I have the flashing lights? You think it will damage the relay?
Very helpful video but I have question I have a 2003 Corolla and my left, right, and hazard flash light doesn't work even after replacing the fuse. I want to next replace the relay can you tell me if the location will be the same for 2003 Corolla as well?
My brake, reverse, hazards, and turn signals do not work. Not even indicated through dash. Bulbs and fuses are fine and even my third brake light works. What could be the problem? Bad wiring or all my relays go at once?
Will this fix my problem if only hazard button and lights don't work on dash. Otherwise it makes the clicking noise and blinkers work outside of the car, just no indication on the dash.
Hi Peter... I am looking for solution for my car reverse light is not working I checked already bulb is OK, Just asking where is the location of the fuse and reverse switch of corolla gli 92 automatic transmission.
I. need help, u have no signal lights on 96 corolla, one day they just stopped working on one side, now they don't work at all, I have all emergency flashers, I even replaced one tail light assembly because it was water logged, Maybe I need to replace the other one? or is there Separate flasher for signal lights?
I have a problem with my 96 corolla dx, i press my brake and my left blinker goes on and stays solid, this happens anytime i press the brake, and it doesnt matter if the blinkers are on or not, my right blinker still functions normally even when braking, but my left blinker only functions properly when not touching the brake pedal. When it goes on solid the sound also stops ticking if i am making a left turn. I think maybe something inside this relay could be the issue but im not sure, im going to try replacing it as soon as i can, ive also heard people say it could have something to do with the trailer wiring as all my fuses seem to be fine.. I will be checking that aswell. If anybody has ever had this problem or has any advice or feedback i appreciate it, and if i end up figuring it out i will leave a comment saying what the problem was and how i fixed it thank you all.. Also i may end up checking all blinker wiring, brake wireing, really and lighting wiring , connections, and fuses.
Checked relays, and fuses.. Still nothing , attempted checking wiring but didnt get to far into it.. Im thinking its the wiring but im not sure where its making contact i checked with a volt meter and it did prove that my left blinker and brake pedal both affect one another somehow in the wiring..
@@slay_dad have you taken a multimeter or test light to the wiring harness that plugs in from the trunk to the tail light? You may find where the brake lead is grounding into the turn signal. Auto parts stores sell that harness made by dorman for 25$
I think to get it out you need a flat screw driver and push a pin or something in the middle of the relay,but be careful not to brake it.I have seen this a long time ago.
hi peter, thanks for the video. i have a geo prizm 95, which is the same as the corolla. i tried to pull the flasher relay as you indicated but it does not come out. i did try with more force, to no avail. any advise on how to pull it out? would it have a screw?
hi peter, thanks for the reply. i found the source of the problem and it was not the relay. it might useful to Geo Prizm 95 owners (and maybe related Geos or Corollas). i had read in this or in another posting that a guy had solved a turn signal problem of his Geo 95 by welding a loose wire to the hazard light switch. i noticed that my hazard light switch was defective and not working consistently. so, when i pushed it in certain position, eureka!!! the turn lights worked again and it is back working. i am replacing the defective hazard light switch. almost sure that the turn lights are hardwired to the hazard light switch so that if the later is turn on, the turn lights do not work.
FOR THOSE ATTEMPTING TO REMOVE THE STOCK FLASHER UNIT... Mine was a bit of a bitch to get out because I didn't know that there's a lock tab on it. The tab is unfortunately facing the opposite side you can physically see (toward the engine). Because the tab is not facing you, you can't easily tell it even has one and it's hard to feel it with your fingers. I ended up just pulling so friggen hard that the lock tab "just let go". Oddly, the new LED flasher I installed had no lock tab whatsoever, so it should just pop out easily when it needs replacing (like every other car I ever owned). Hope this helps you to not struggle.
Thanks for comment. 👍
Hey dude, if you happen to see this and remember, can you describe the lock tab any more? Like if you could tell if I should push/pull/etc and really specifically where it is on the relay since we can't see that side.
thank you. i also love the accent its like getting expert advise from the count on seseame street. really thank you!
+David Miertschin Thank You. :-)
THANKS A MILLION PETER FOR THIS VIDEO, IT HELPED ME SOLVE THIS PROBLEM ON MY GIRLFRIENDS CAR JUST CAME FROM THE STORE AS WE SPEAK FOR A NEW RELAY SWITCH IT IS WORKING FINE NOW I WAS LOOKING IN FRONT THE CAR WHO WOULD OF THOUGHT IT WAS UNDER THERE THANKS MAN APPRECIATE IT
+MrKhaos79 Thanks for feed back. :-)
thanks for your video, changed my relay today.
Thanks for comment. :-)
How did you get the old one out? I can't get it to come out...
thank you for putting this video up, i will be trying this on my 1993 toyota corolla.
Thanks to your video 👍 now I'm sure which relay to replace. My turn signal stopped flashing.
Thank you very much.
Sir,I appreciated for ur effort sir..
God blessed po.
Thank you too👍😃
@@PeterFinnTheCarDoctor is hyperflashing cause by bad flasher relay?
I know this is an older video at this point, but what do I do if my flasher is stuck? It's the same exact flasher you have, no clips or anything holding it down, and it won't come out. I've tried going for broke and clamping a pair of channel locks on it and trying to pry it out. The relays around it were very stuck in when I first removed them as well but a good tug with the channel locks popped them out. I've been tuggin on my flasher off and on for three days and still it won't budge. Does anyone have any ideas?
Hi Peter your videos make my 2000 ae111 corolla happy, i have a question when i pull my wiper switch it makes blow water but not make wipe automaticly recently this happens before that when i pull switch that make blow water and wipe several times automaticly my question is where is wiper relay on ae111 corolla thank you
hi there, i drive a Toyota tazz 2000 model. My turn signal and hazards go on and off, can it be my flasher relay? The turn signal flicks but stops while car is still turning, and hazards will go on and off when car is parked when testing them.South Africa.
I love you you solve my problem with my car you are the bisst
Great !
How do you fix signal and hazard lights not flashing on a 2003-2006 Toyota Corolla??? It suddenly will not flash, only front yellow lights turn on but not flash. Please help!
Thank you Peter Finn
2001 e11 Corolla... hazards will not stop flashing I have found the relay under the kick panel right night side of accelerator. Will not budge. There are three pin like areas I have pushed them all no release. Very difficult area to access have tried good force. Still no release. Very frustrating.
Are turn signal relays located in the same areas on cars? I have a Lexus sc300 and need it replaced. thank u
Thank you. For the great advise. It fixed my blinkers.
Thanks for feedback. :-)
How did you get the old one out? Like others have said I can't get it to come out....
Peter, I'm about to change over to an electonic flasher unit to handle LED bulbs in my Camry, so I want to ask if you're sure the flasher unit is in this same area on a 1999 Camry? My Haynes repair manual sort of says it's behind the gauge cluster. I'm old, so I don't want to be upside down on the floor for a long time to find out it's not there.
Hi, it should be the same
@@PeterFinnTheCarDoctor Yes it was the same, thanks!
I got a 1999 corolla,left turn signal stays lit only when defroster is on ,but dosent blink when i turn on left turn signal?
You are No.1
Thanks Sir. :-)
When i turn on left blinker dosent blink on dash,but i does work outside,when i turn on my rear defroster left blinker stays on?...only right turn signal works(blinks).
Moikka, saisiko ohjeet suomeksi? Corollan vilkkurele pitäis ensin löytää, jotta osaisin ostaa uuden ehjän tilalle. 😄
Thanks for comment. 😀👍
Can you tell me where is headlight flasher relay in this model of corolla
Hello.Good video.I have an aftermarket car alarm and I want to connect it to the flasher with a wire so when the alarm is on to have the hazard lights on to,do you think it's possible? relay flasher has 3 pins,can I put the wire on all 3 pins and put back the flasher and then try the alarm if I have the flashing lights? You think it will damage the relay?
Very helpful video but I have question I have a 2003 Corolla and my left, right, and hazard flash light doesn't work even after replacing the fuse. I want to next replace the relay can you tell me if the location will be the same for 2003 Corolla as well?
Mike E It should be. Please turn on flasher and then go to listen flasher click sound. Sound tells where the flasher relay is.
This Flasher relay is really hard to pull out, he makes it look so easy, does anyone have any tips how to pull it out?
+jay s Hi, use more force.
I'm having the same problem.
My brake, reverse, hazards, and turn signals do not work. Not even indicated through dash. Bulbs and fuses are fine and even my third brake light works. What could be the problem? Bad wiring or all my relays go at once?
Hi, bad wiring. Maybe one ground cable is loosen in engine area ?
Thank you!!
Mark Breton Thank You.
Hello, Where is the flasher in Corolla 2015?
+Ambro Calderon Hi, I need to do new video.
Will this fix my problem if only hazard button and lights don't work on dash. Otherwise it makes the clicking noise and blinkers work outside of the car, just no indication on the dash.
Maybe it helps
What might be the problem when you have both flashers are working, while the hazard don't work?
The switch ?
@@PeterFinnTheCarDoctor switch relay cables fuze is slot that could go wrong
Thank you
Thank You. :-)
Hi Peter... I am looking for solution for my car reverse light is not working I checked already bulb is OK, Just asking where is the location of the fuse and reverse switch of corolla gli 92 automatic transmission.
Hi, I need to investigate.
Hey how about the 2013 Corolla. Does it have one, I don’t want to put resistors. This will fix the blinking is red if resistors
Hi, I need to check.
I. need help, u have no signal lights on 96 corolla, one day they just stopped working on one side, now they don't work at all, I have all emergency flashers, I even replaced one tail light assembly because it was water logged, Maybe I need to replace the other one? or is there Separate flasher for signal lights?
Hi, replace new bulbs and check all cables
I have a couple of these can I use them for my 84 Corolla?
Hello!
Do You know where can i find Wiper Relay in corolla E10 hatchback 3D?
Good comment. 😀👍
Sorry you talk so softly or the video sound is set so soft it is unclear to hear what you are saying as you are tending to the repair.
Thank you for your comment. 👍
what is the blue relay
my left signal doesn't work well it works when it wants to if u hit it in the right spot but my right one works fine what could be the problem
Hi, maybe the switch is stuck. Look my repair video: ruclips.net/video/xQitXDpTdrg/видео.html
have you fixed it jenny? Im having the same problem..
Where is the turn signal fuse on a 2002 toyota camry?
ruclips.net/video/Iwf-8IpGkGg/видео.html
I have a 99 toyota tacoma, where is the turn relay located ?
Hi, I need to do new video. :-)
I have a problem with my 96 corolla dx, i press my brake and my left blinker goes on and stays solid, this happens anytime i press the brake, and it doesnt matter if the blinkers are on or not, my right blinker still functions normally even when braking, but my left blinker only functions properly when not touching the brake pedal. When it goes on solid the sound also stops ticking if i am making a left turn. I think maybe something inside this relay could be the issue but im not sure, im going to try replacing it as soon as i can, ive also heard people say it could have something to do with the trailer wiring as all my fuses seem to be fine.. I will be checking that aswell. If anybody has ever had this problem or has any advice or feedback i appreciate it, and if i end up figuring it out i will leave a comment saying what the problem was and how i fixed it thank you all.. Also i may end up checking all blinker wiring, brake wireing, really and lighting wiring , connections, and fuses.
SLAY_DAD
I also have same problem EE111 95 corolla
Checked relays, and fuses.. Still nothing , attempted checking wiring but didnt get to far into it.. Im thinking its the wiring but im not sure where its making contact i checked with a volt meter and it did prove that my left blinker and brake pedal both affect one another somehow in the wiring..
@@slay_dad have you taken a multimeter or test light to the wiring harness that plugs in from the trunk to the tail light? You may find where the brake lead is grounding into the turn signal. Auto parts stores sell that harness made by dorman for 25$
Did you solve this? Prior to this issue, were any bulbs changed out?
my hazard indicator has no light in dash, but i heard a fast noisy blink sound,
OK and Thanks for comment. :-)
I tried to remove mine but its so tight. Any easier way to remove it?
Did you ever get it out? I have the same problem but can't get the old one out?
I think to get it out you need a flat screw driver and push a pin or something in the middle of the relay,but be careful not to brake it.I have seen this a long time ago.
Hello. My relay will not come out. I'm pulling so hard I'm afraid I will break something. What am I doing wrong?
It is stuck
Peter Finn How do I unstuck it?
@@mr.animation5259 Did you ever get that out? I have this problem, now, and can't get it out.
hi peter, thanks for the video. i have a geo prizm 95, which is the same as the corolla. i tried to pull the flasher relay as you indicated but it does not come out. i did try with more force, to no avail. any advise on how to pull it out? would it have a screw?
HI, it is bad. So visit the Toyota dealer. They have special tools.
hi peter, thanks for the reply. i found the source of the problem and it was not the relay. it might useful to Geo Prizm 95 owners (and maybe related Geos or Corollas). i had read in this or in another posting that a guy had solved a turn signal problem of his Geo 95 by welding a loose wire to the hazard light switch. i noticed that my hazard light switch was defective and not working consistently. so, when i pushed it in certain position, eureka!!! the turn lights worked again and it is back working. i am replacing the defective hazard light switch. almost sure that the turn lights are hardwired to the hazard light switch so that if the later is turn on, the turn lights do not work.
Thanks for comment. :-)
Fernando Portes is there a separate Relay for turn signal and flashers?
.
Noted 👍
You have an email for contact?
Alex Alvarado Hello. I use RUclips messages. Sorry.
Walang tagalo
👍