Hi Brother, love your videos you can tell you are the master full of knowledge and wisdom. I love to take a gap year and work at your shop for free what an experience that would be. Back to reality. God Bless 🙏 Dido 🇦🇺
Its obvious you fellow's have know each other for sometime it was great entertainment and informative, reminds me of how me and my friends tackle projects, thanks for taking the time to make these great videos your knowledge is priceless and I wish I knew half of what ya'll have probably forgotten , thanks again !
tatro throughout your videos I have picked up some of your knowledge and skills you have shared your awesome!! I am a bodyman 26 yrs+ and painter for over 22 yrs under my belt I also build my own bikes as a hobby I tell people anybody can put paint in a spraygun and shoot,but you got to know what your doeing when you are doeing it! this is why you are a teacher thank you for taking your time...
@@TatroMachine bro I dunno about any dumbass if anyone could fix engines then mechanics wouldn't exist, I am a pretty decent car mechanic and to me pretty much anyone in theory should be able to fix a broken say head gasket using a manual or internet but then you have Tappets there are solids,and hydraulic lifters, then shim adjustment and side valve then adjustable push rods so it is easy to make mistakes.
Haha I love you Tatro, listening to you coach is exactly like what I hear when I work with my buddy in his shop on my bike. Good times, great vids man. Very much appreciated sir 😂👍
i came across your videos looking for videos for a little help on a few things ive been doing on my bike and ive spent more time watching your videos over the past few days than working on my bike I haven't seen anyone else that has the knowledge you have and also makes great videos on some detailed work from tune ups to whole engine builds also some humor in there too keep up the great work
Here's the thing I don't understand. If I had a shop like this guy, and I owned all the parts, bolts, washers, nuts, lock washers, tempered bolts, you get my drift, I still couldn't walk to and find them as fast as he does. I need a 2 3/4" bolt with a tapered shank Tatro. Dude is like, give me 2 seconds and he walks right to the spot, and usually picks it out of like Eleventy Hundred Million bolts on the second or third try. I'd be like, "finish prepping and painting your gas tank, I'll be back in a bit with that head bolt in a little while"
Sometimes talking to some folks in a certain way gives them a better learning experience.....some folks are "Hard Headed". I would not mind working with Taro for a week or two,...would love to learn more about bikes.
Great instructional video my only problem with this whole thing is the way the guy talking talks to his mechanic. Might seem like he’s teaching but mostly he sounds condescending. My boss ever talk to me like that I find a new shop to work in.
I don't think he's Tatro's mechanic. More likely is the guy is Tatro's customer (the guy that bought the engine) and Tatro is "assisting" him with assembling the engine.
I can have 12,0987 fasteners on hand and somehow the one I need isn't in the bins anywhere. Oh, and the missing tools because somebody "borrowed" them and didn't put them back so you spend a damn hour searching for it to do a three minute job.
The title of the video says, "Evo", so I thought it was a Harley Evo motor. That's why I asked. I wasn't criticizing,. I'm not as experienced as some of your viewers and I was honestly trying to learn something. Your reply was unnecessarily sarcastic.
boy, i did not even call you a dumbass. you need to get some thicker skin if you are going to stay with harleys. my videos do not say stock rebuilds because i do not do those. an evo is a slang word for a type of harley motor. harley never used these type descriptions, only harley riders do. my responses are direct and to the point and that is how i like it. if you can't take the truth you should go elsewhere. your education is lacking but that is expected on newbees. tatro
@@TatroMachine Tatro you bring me back to the best years in my life. A man, much like you, taught me to wrench on my own rides, he also introduced me to men who specialised in the way they worked on bikes. I miss those days and your videos are very satisfying to watch, and by proxy, be part of. Thank You Sir
You wouldn't happen to know where I could pick up the right side engine case for a '91 Electra Glide Sport FLHS. The Dumbass who gave me the engine had cranked down on one of cylinder bolts which got mashed up in the threads and cracked the right side case right thru to the cylinder. Just thought to ask, you never know, right?
Hi Brother, love your videos you can tell you are the master full of knowledge and wisdom. I love to take a gap year and work at your shop for free what an experience that would be. Back to reality. God Bless 🙏 Dido 🇦🇺
Its obvious you fellow's have know each other for sometime it was great entertainment and informative, reminds me of how me and my friends tackle projects, thanks for taking the time to make these great videos your knowledge is priceless and I wish I knew half of what ya'll have probably forgotten , thanks again !
No doubt, ain't it great!??
tatro throughout your videos I have picked up some of your knowledge and skills you have shared your awesome!! I am a bodyman 26 yrs+ and painter for over 22 yrs under my belt I also build my own bikes as a hobby I tell people anybody can put paint in a spraygun and shoot,but you got to know what your doeing when you are doeing it! this is why you are a teacher thank you for taking your time...
i prove that everyday. any dumbass can do this if they want to.
tatro
@@TatroMachine bro I dunno about any dumbass if anyone could fix engines then mechanics wouldn't exist, I am a pretty decent car mechanic and to me pretty much anyone in theory should be able to fix a broken say head gasket using a manual or internet but then you have Tappets there are solids,and hydraulic lifters, then shim adjustment and side valve then adjustable push rods so it is easy to make mistakes.
Thanx Rick,Tatro&Scoooob's, these videos make me feel like I'm in the shop with you guys....FANTASTIC,
Haha I love you Tatro, listening to you coach is exactly like what I hear when I work with my buddy in his shop on my bike. Good times, great vids man. Very much appreciated sir 😂👍
i came across your videos looking for videos for a little help on a few things ive been doing on my bike and ive spent more time watching your videos over the past few days than working on my bike I haven't seen anyone else that has the knowledge you have and also makes great videos on some detailed work from tune ups to whole engine builds also some humor in there too keep up the great work
Here's the thing I don't understand. If I had a shop like this guy, and I owned all the parts, bolts, washers, nuts, lock washers, tempered bolts, you get my drift, I still couldn't walk to and find them as fast as he does. I need a 2 3/4" bolt with a tapered shank Tatro. Dude is like, give me 2 seconds and he walks right to the spot, and usually picks it out of like Eleventy Hundred Million bolts on the second or third try. I'd be like, "finish prepping and painting your gas tank, I'll be back in a bit with that head bolt in a little while"
at least you didn't ask for a muffler bearing.
tatro
Awesome job!!
Great video!
Very Great videos... thanks Tatro!!!!
It's good to see either someone out there who still knows what they're doing
Sometimes talking to some folks in a certain way gives them a better learning experience.....some folks are "Hard Headed". I would not mind working with Taro for a week or two,...would love to learn more about bikes.
Great instructional video my only problem with this whole thing is the way the guy talking talks to his mechanic. Might seem like he’s teaching but mostly he sounds condescending. My boss ever talk to me like that I find a new shop to work in.
I don't think he's Tatro's mechanic. More likely is the guy is Tatro's customer (the guy that bought the engine) and Tatro is "assisting" him with assembling the engine.
Crybaby bitch
Great videos... thanks.....I would love to work with Tatro for a week or two...
That "idjit lite" come on.........? When you run out of NITRO? 😅🙃(by the time it lights? Rods are out the bottom)
Haha quit finger f@#$ing it line brought back childhood memories working on stuff with my pops.
Are we gonna get to hear this hot mess of mismatched parts run ? Awsome work on getting everything machined up to work together tatro
now rick has to put the mismatched custom bike together.
tatroi
Very nice, can't wait to see it running.
I know this is an older video but what did you guys pay for that engine just curious
beats me, its all swapmeet parts.
tatro
Awesome video. But you leave your torque wrench set to specific torque and never back it off to zero? Yikes!
been that way for years. still works like it should. buy good tools and they last.
tatro
Love watching you videos the guy working on the motor seems like he's one cool dude wish I knew him and you too as far as that goes catch you later
,,,,,like to see inside those cyl,,,,,maybe branch reworked.......
look in the eariler videos. this was video number 11 so there might be some more info in the other 10 videos.
tatro
You only found those missing parts because you weren't looking for them
I can have 12,0987 fasteners on hand and somehow the one I need isn't in the bins anywhere. Oh, and the missing tools because somebody "borrowed" them and didn't put them back so you spend a damn hour searching for it to do a three minute job.
Big Evo has 88 ci? I thought it only had 80 ci/1340 cc's. Did I miss something?
does this look like a stock motor to you? it has a big bore kit on it.
tatro
The title of the video says, "Evo", so I thought it was a Harley Evo motor. That's why I asked. I wasn't criticizing,. I'm not as experienced as some of your viewers and I was honestly trying to learn something. Your reply was unnecessarily sarcastic.
boy, i did not even call you a dumbass. you need to get some thicker skin if you are going to stay with harleys.
my videos do not say stock rebuilds because i do not do those. an evo is a slang word for a type of harley motor. harley never used these type descriptions, only harley riders do. my responses are direct and to the point and that is how i like it. if you can't take the truth you should go elsewhere. your education is lacking but that is expected on newbees.
tatro
Another Great Video.... Thx
I would have too put those heads in the mill....diamond chassis would be gone....lol 👍
why tighten the bolts in clockwise. aren't ya supposed to tighten bolts diagonally.
Who made all that stuff?
unknown when you but parts at a swapmeet.
tatro
attaway to unevenly torque shit!!
To the owner of that motor Trato will destroy your engine
you could at least spell my name correctly. what a moron.
tatro
@@TatroMachine Tatro you bring me back to the best years in my life. A man, much like you, taught me to wrench on my own rides, he also introduced me to men who specialised in the way they worked on bikes. I miss those days and your videos are very satisfying to watch, and by proxy, be part of. Thank You Sir
You wouldn't happen to know where I could pick up the right side engine case for a '91 Electra Glide Sport FLHS. The Dumbass who gave me the engine had cranked down on one of cylinder bolts which got mashed up in the threads and cracked the right side case right thru to the cylinder. Just thought to ask, you never know, right?