pallet pry bar simple build
HTML-код
- Опубликовано: 20 дек 2017
- In this video we will build a simple pallet wood pry bar.
#kevinrobinson6688 #PalletWoodPryBar
Keep it real & clean.
All donations are appreciated thank you for your help.
Help Support My Channel paypal.me/kevinrobinson6688 Thank You.
Mailing address
kevinrobinson6688 P.O.Box 123 Bobtown,PA 15315-0123 
Хобби
👍👍👍👌👌bjuti fuul
I made it and I am astounded how well it works, previously would take me 2 hours to dismantle a pallet, now it takes me 10min, thank you kindly
That's great they make short work of a pallet for sure thanks for the comment and watching.
Thanks for the design. It's awesome!
Using this as a guide for mine! I want to build my smoker and some other things around the farm with pallet wood, so this will be perfect!
It will work great for you.
Awesome job. I take pallets apart the old school way hammer pry bar or Sawzall. Lol
Some pallets can be hard to get apart old school works to William.
Great bit of "country engineering" Kevin. Thanks for the video!
That's right and it works and cost on money Thanks Ron.
Pallet-Buster 3.0
Looks like it works pretty well.
real nice build
Thanks unclefrank.
Great idea, and easy. Tanks a lot!!!
Glad it helped!
My craft is dismantling the pallet without breaking the wood. This is my work and love it
I'm 68 and retired on a small pesion and like the idea of free wood of all sorts to build things for sale we'll see what happens awsome vidio thanks
Very Nice!!
Thanks Thomas and Merry Christmas to you and your family.
Great video. I’m going to have to build one of these. We throw away so many pallets on the jobs I work on. When we built one of the steel mills some of the machines came on pallets that had 6x6 and 2x6. My buddy salvaged a lot of them and had enough wood to build a 3 room hunting cabin. Unfortunately 75% of the pallets went to the landfill.
I am glad I'm not there I world be taking them apart build build and sale sale you could make some good money Billy.
I have big and heavy pallets. Last one is simplest and works well TKS ( Finland)
It works great.
Thank you very much. Learn well.
Thanks for the comment and watching glad to help.
From experience tearing things apart...I have learned to lay boards with nails with the nail points facing down. Nobody intentionally steps on a nail but all it takes is a slight stumble or not paying attention to get a long rusty nail in the bottom of your foot and maybe even out the top. Even if you are up to date on tetanus shots, a nail in your foot can make life miserable for about a week until it heals. Can't wait to start seeing some of the finished furniture and cabinets!
Thanks for watching George
Nice idea Sir
Thank you Leslie.
Kevin,
I was raised by a single mom, and was a very awkward child for various reasons. Most of the other kids preferred to bully me, and the adults tried the wrong things to connect with me. Why should I care about sports when the people who do are the ones beating the tar out of me? So I never really had anyone to teach me all of the things that I wanted to learn. I tried to take shop in school to learn, but had to drop out when a guy broke two of my ribs.
I've said a few things before, but I just wanted you to know how much your channel means to me. Thanks to people like yourself, Essential Craftsman, and Primitive Technology, I'm finally starting to get an idea about so many things that I always wondered about. I'm finally starting to learn about the things that I always wanted to, but never had a chance to. I'm 40, and just now feel like I'm starting to become a man, in no small part because of people like you.
Thank you so much for what you do and the time that you devote to sharing these things with us.
dagoonite know one would bully me or anyone around me but they would make fun of me because I couldn't read I felt that god gave me something more my hands so my hands made up for my reading skills I can fix almost anything or build anything so I have been blessed not all my videos are perfect or right but it works for me so if you need a video you let me know and i will do my best for you don't forget fix it is broke you can't break it again so try to fix it Thank you for watching and Merry Christmas to you and your family.
I grew up in a bad situation as well. I finally had enough and stopped taking crap from ANYONE. That opened a whole other can of worms though. Years later I have settled down and have a pretty normal life. I still don't feel like I fit in most times and I still feel more like a young adult than an actual adult.
I am glad that you and I found a way to get through the struggles rather than taking the easy way out. Congratulations you are a winner. Keep your head up and be good to people if they will let you. Sometimes you have to keep being good to hateful people for a long time before they change their attitude towards you, but they are the ones that are the most rewarding when they do.
Great video nice build think I’ll be making this one thanks for the great videos all year merry Christmas and a happy new year to you and your family 👍🎉
Thanks Richard and Merry Christmas to you and your family.
Good video. merry Christmas KEVIN and family.
Thanks Danny Merry Christmas my friend.
👍🎶🍻🍻🍻🍻🍻🍻🍻🍻
Buena!!!☕ herramienta 👌👍⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐
I'm sure that works fine. I would suggest that it might work even better if the re-bar was "below" the flat bar. It would give you more leverage I believe especially when it's being used on pallets like the one you just did where you are prying against the 2X4 instead of the next cross board.
Thanks for the tip
I disagree, I have made the pallet buster and can see how perfect the position of the round bar is when using it, anywhere else and it would be in the wrong place.
Hey Kevin,came your way from the Recommend list. I use pallets for just about everything. Have to give this a try. I added my $$upport & could use yours as well. Thank you, Joe Z.
No problem JOE Z.
Geiles Teil
Thank you for watching.
Very nice can you make me one?
Thanks Lance but it would cost a lot for shipping it is pretty heavy.
Great job ! I love it and am making one. Wondering if the bottom was a little more bent up if the would help you to not bend over so much while prying. Not exactly like an L but more hat yours - maybe somewhere in between. Just a thought.
You would have to try it can't hurt Lisa thanks for watching.
👍 !
Thanks
The rebar I would change for something smooth it would save wrecking the 2x4 .Apart from that I like it
Thanks Tony.
this guy is a genius safety first right, no gloves, like you hands ?
I love the Red one do you want to sale it to me ? I don't know wheld that will be great for my Job. I live in Newark California. Let me know if you want to sale it to me. & Thanks for share the video. Keep doing that kind of videos with you r. Good ideas Kevin have a wonderful day.
Nice, simple but quality build.... Thanks for posting! Subscribed! Also, if you really want to ruin the ears of headphone users even more, you could tape the microphone right to the grinder. 😉 I'll have to proactively remember to keep my volume down on DIY channels from now on. 😁
Sorry about that, but thanks for watching.
@@Robinson-Homestead Thanks, Kevin! I ended up building one just like your red one here AND I bought a Duckbill Deck Wrecker... and after using both tools, I prefer your design as it does less damage to the pallet boards.
Sure seems to damage a lot of boards with this tool. I guess that's okay if someone just wants firewood, which I do on occasion.
Awesome Video! THx! Hey What is the tool that you were using to cut the metal with. Thx Again!
plasma cutter hears a video ruclips.net/video/l3kurVjTNgQ/видео.html
Bene grazie
Thanks for the comment and watching.
If you supply that does not break it should be sprayed with water
kevin your video are very interesting, do you think if I gave you a send you some specifications can you do a pry bar specially to be used in the roofing industry specially to removed concrete or clay tiles without breaking them.
I could do my best no promises email kdr6688@gmail.com
@@Robinson-Homestead thanks for your response I will make a little design and email it to you with the specifications thanks once again
Dessas paletes queria eu muitas, são do mais fácil hahaha
Use your PPE
Thanks for watching
I like your design, hey, would it help with weight and cost to shorten the pipe to about 9 inches and the rest of the handle could be a hardwood insert, like hickory? Really, only the business end needs to be metal, right? The handle could then be different lengths, to suit people of different heights.
I'm sure that would work.
Dear me, ive lost the will to breath
Thanks for watching.
People get this pallets that are broken, then repair them and resell the back to who ever needs them.
Good idea thanks Robert.
Good video but very long winded. Like most
Thanks for watching Tom.
So essentially a burk bar
Thanks for the comment James.
pero esta rompiendo la otra tabla el filo ka idea es que no apoye en la tabla que no se se esta sacando o sea dañas una para sacar otra no puede ser
I wish I know how to translate thank you for the comment.
@@Robinson-Homestead Friend uses the google translator
If you are going to use those boards to build other projects your damaging those boards
They worked for me thanks for watching.
good ! I want to make my channel subscription 👍
Kevin 2 things
1- it's not a Por baar, it's a Pry Bar
2- go on a diet before your fat will kill you , ...this advice is free, normally l change £300 for that advice, no doubt your a jolly nice fellow, a stout bloke ?
English Mike?
Hey michael. U r a dick. He can diet but u will always be a dick.