I had this same problem yesterday with my 2013 Fiat Doblo Multijet. I went back to the Garage who changed my Oil last month,they could figure it out 🤔 So after seen your Video i tried it this morning and Great 👍 it worked 💪 Thanks for the Video!!!
Thanks for the video. It did not work on my 2016 Citroen Relay but I found another video that said to Hold brake pedal and Trottle pedal down for 30 seconds with ignition switched on. . And it worked
Three Vanlifers - Voyageurs en van Merci de votre attention et je suis heureux que cela vous ait aidé. Je rencontre toujours des problèmes qui n’ont pas les meilleures réponses sur youtube. Cliquez sur le bouton subsrcibe, car il se peut qu’il y ait des créations à venir qui pourraient vous aider.
I get this.... but shouldn't you just be changing the oil... ? The light is flashing on my Citroen Jumper camper van so seems to me best to change the oil right?
I did this video after changing the oil. Sometimes a customers oil change schedule differs from what the vehicle indicates so the light may need to be reset out of sequence with the oil change 👍🏼
This did Indeed happen but When It Was Gone I got Another Line on my screen saying service passed. But oil change was gone. How do I get rid of the second Line?
I changed the oil but light/warning wasn't yet on. Will doing this reset still take the counter to zero, does it give a confirmation signal? Thanks for the tip.
Hi maybe this is a dumb question but here goes :-) If I replace my oil before the warning light should I follow the same procedure to reset everything to tell the van its got new oil ?
Hi, could I ask you a question.... When you turn on the Hazard lights, does the red Hazard light switch flash as well as the indicator lights on the dash.... Mine doesn't and I can't remember if it ever did :) Thanks, Pete
@@davidseamons1230 Brilliant that answers my question above about changing the oil before the warning lights come on and does this reset the counter which it appears it does.
Due to all the comments it obviously works for the lights, However it does not reset the oil degradation algorithm on Ducato Euro6 engines. This can only be done via the OBD2 port. Currently this can only be done (DIY equipment) with Multiecuscan and Alfaobd. Without reset this could cause limp mode.
Hi. Showing this in real time instead of skipping the seconds in-between makes this a perfect lesson. Clearly it worked for me. Cheers fella.👌👌👌
Glad it helped 👍🏼
Σας ευχαριστώ πολύ. Το βίντεο σας ήταν κατατοπιστικό.
Χαιρετίσματα από την Ελλάδα.
I had this same problem yesterday with my 2013 Fiat Doblo Multijet.
I went back to the Garage who changed my Oil last month,they could figure it out 🤔
So after seen your Video i tried it this morning and Great 👍 it worked 💪
Thanks for the Video!!!
Glad it helped
Many thanks bro, I’ve just now reset the oil change indicator.
Thanks for the video.
It did not work on my 2016 Citroen Relay but I found another video that said to Hold brake pedal and Trottle pedal down for 30 seconds with ignition switched on. . And it worked
Thank god I found this comment the 30 second trick worked for my 2017 Citroen relay too🙏🙏
Just happened to me on peugeot boxer 3.0 hdi. This worked perfectly. Thank you!
Worked on a 2011 Fiat Linea 1.6 Multijet.
Thank you, your video helped a lot!👍🏼
spot on Service counter in the menu reset from 0 to 30000
Worked like a charm. Thanks for sharing this info!!!
hello David !! Thank you so much !! Je suis français et ça faisait 2 mois que je cherchais!! Merci beaucoup !!
vous êtes plus que bienvenus. Je suis content que cela a fonctionné pour toi
My car in 15” Ducato ! Thanks man is video!
Thanks for this. Worked on a 2017 2.3 Multijet Ducato
Thanks from Germany, worked perfectly!
Btw: Fiat Ducato 140Hp made in 2020🚐
Thanks for that movie😉 it help a lot
Regards from Polen😊
Thanks for your video, it works on facelift 2022 Fiat Ducato as well
Merci pour ce tuto, il m'a évité d'aller au garage !
Three Vanlifers - Voyageurs en van Merci de votre attention et je suis heureux que cela vous ait aidé. Je rencontre toujours des problèmes qui n’ont pas les meilleures réponses sur youtube. Cliquez sur le bouton subsrcibe, car il se peut qu’il y ait des créations à venir qui pourraient vous aider.
Thank you! This worked on my 2015 Fiat Ducato.
Worked on my 2015 fiat ducato, thanks buddy
I would have checked it by the OBD. thanks a lot to save my time.
Thank you..grateful
I used to always do it like that and it always worked but now I did it 6 times in a row and it still did not go away. What could he the problem?
Ducato 2020 2.3 180 worked thanks
But Ducato 2020 with adblue not working :(
Edit: work but after fill adblue tank on max ☺️
Thanks man, this also applies on Jeep renegade 2.0 diesel as well.. 🙏
Thanks for your help, works great 👍
Amazing video thank you.
This worked on a Fiat Punto Evo 2012.
Thank you very much!
Thanks. 2016 Ducato 2.3 130hp. Had to do it twice. Stick to 60 secs, and don't touch any other dash items and all should be good
Works for 2015 model as well....Thank you
Thank you very much ! Ça maaarche !!!!!
bonjour et merci de france,
ducato ccar 3 l de 2014
bravo, j avais bien cherché !
Brilliant thank you! Will try it!
je viens de le faire çà marche , j'ai un CC fiat ducato 2014 multi jet 130 , merci beaucoup pour ce tuto
Je suis content que vous ayez trouvé le tutoriel utile
This works on my vauxhall combo 2015 model. I first plugged in my code reader and it shows no faults. So I reset it using this method. Thanks.
bonjour et merci pour la manipulation cordialement
Thanks its working.Thanks again.
Wery helpful, thanks
Really helpful....really really
Thank you for your advice 👍
Works every time
In Doblo 2017 works. Thank you 😀
Thank you
I get this.... but shouldn't you just be changing the oil... ? The light is flashing on my Citroen Jumper camper van so seems to me best to change the oil right?
I did this video after changing the oil. Sometimes a customers oil change schedule differs from what the vehicle indicates so the light may need to be reset out of sequence with the oil change 👍🏼
Very good information.
Thanks works great
Thanks for that!
Good man many thanks 😊
Works in citroen relay👍
brilliant, thankyou👍
Thank you for help!
Brilliant it worked
It work's. Thank you
Thanks 👍
Same way on fiat ducato 2012. Thanks
What a legend
Legend
Works on citreon relay too
This did Indeed happen but When It Was Gone I got Another Line on my screen saying service passed. But oil change was gone. How do I get rid of the second Line?
Thx MAN !!
I changed the oil but light/warning wasn't yet on. Will doing this reset still take the counter to zero, does it give a confirmation signal? Thanks for the tip.
Good question I have asked a similar one above I do hope someone helps here as its a valid question.
Fiat 500l works great
Thnks bro
Hi maybe this is a dumb question but here goes :-) If I replace my oil before the warning light should I follow the same procedure to reset everything to tell the van its got new oil ?
I do it, just to avoid getting the warning later
Thank you@@TelmoMonteiro
Would this also work with a 2020 Fiat Ducato?
Can't see why not, give it a go and let us know 👍🏻👨🔧
Hi, could I ask you a question.... When you turn on the Hazard lights, does the red Hazard light switch flash as well as the indicator lights on the dash.... Mine doesn't and I can't remember if it ever did :) Thanks, Pete
I will check the next time I'm in one of these vans
Ok for 2.0 115cv 16v de 2017 .. merci
Does it reset the mileage to change in the MENU?
Ray Cripps sorry I’m not sure. Can you explain more?
Sorry I’ve just read your question again. This procedure resets the mileage countdown to the next oil change
@@davidseamons1230 Brilliant that answers my question above about changing the oil before the warning lights come on and does this reset the counter which it appears it does.
Due to all the comments it obviously works for the lights, However it does not reset the oil degradation algorithm on Ducato Euro6 engines. This can only be done via the OBD2 port. Currently this can only be done (DIY equipment) with Multiecuscan and Alfaobd. Without reset this could cause limp mode.
on my 2017 euro 6 it did reset the oil degradation counter to 28,000 miles
I ve since found early versions of the ECU software can do this.@@raycripps6703
Thanks a lot, I tried on fiat evo 2011 and the error disappeared!
Works!
Didn’t work on my Peugeot boxer van ! Just the same van with a different badge .
Couldn't off made it more complicated could they.
I know right? it could've been made simpler
Thank you so much👍
Thanks!
Thanks🎉