Product Review | 3M Scotch-Brite Clean & Strip XT Pro Disc versus Wire Cup Brush
HTML-код
- Опубликовано: 12 июл 2024
- If you are a frequent user of wire cup brush, are you satisfied with the results? What if there is an alternative, that delivers a quick and consistent performance? Are you willing to explore? Watch this video.
When 3M first invented Clean and Strip, it revolutionized cleaning in the metal fabrication industry. Welds could be cleaned quickly and easily without damaging the workpiece, removing the need to use harmful and dangerous chemicals. Surfaces could be cleaned and prepared before welding without using wire brushes or scrapers. This quite simply meant a better-finished product.
Specifications
*Diameter (D): 4’’ / 100MM
*Arbor Size (AS): 16.0MM
*Material: Silicon Carbide Mineral
*Form Type: Disc
*Grade: Extra Coarse
*Colour: Dark Purple
*Max RPM: 13,000
Features
*Rust, paint, light mill scale removal
*Maintains workpiece shape
*Low sparking
*Ideal for surface prep
*Made with silicon carbide mineral
*Rapid coating removal and surface prep
*Decreased chunking - extended life
*Highly conformable
*High-speed rating
*Quick-change, spin-on thread
Typical Applications
*Pre and post-weld cleaning
*Rust, paint, and coating removal
*Surface contaminant cleaning
*Rust, paint, and transport primer removal
*Pre and post-TIG and spot weld cleaning
*Sealers and coatings removal
Shop online now at bit.ly/3tgIDNw
For more information, please visit www.ewarehouse.my - Malaysia's Largest Home Improvement Online Store. Хобби
This is what I wanted. Direct and to the point. Good stuff man.
Thanks
I think the most telling comparison is the last one with "heavy scale". The wire wheel did a great job knocking the rust off but didn't touch the underlying mill scale at all. The 3m pad ate right through both the rust and the mill scale.
Thanks
great for removing stuff without destroying the base material. Great video from Cock Gay !
Thanks.
What brand and model tool were you using with the 3M disk?
Thanks for the video. Mine will be here tomorrow…
Enjoy it
Thanx fot this great video really and appreciate your in-depth data, i've a situation here and i need your advice for a newbie like me
i want to strip my old car paint to metal, it's my 1st project, so i've the time and i don't mind going slow, so i bought mini grinder with max rpm 3200 and intended to run these cups smoothly and nicely.
what's your advice, could it do the job and what type of cups should i use or should i use 3M Scotch-Brite Clean & Strip XT Pro Disc for better finish and safer metal results.
thank again man.
If you need a delicate finishing, may be you can consider getting a grinder with adjustable speed control.
Of course, I would recommend 3M XT Pro for efficiency and safety reason. Enjoy!
👌👍
thank you
Have it verse a sanding disk. That's more comparable no?
apple versus orange?