I'm a life-long maker (needlework and paper art) with zero application for 99% of the tools you use - but wow, I love learning from you! And your Handmade podcast with Derek & Paul is in my top 3, with Modern Maker Podcast & Making It. I could listen to all of you every day! Thanks for doing all you do.
I know, right! Quilter, rooky woodworker, maker here. I seriously took notes, pausing the video, rewinding with captions so I didn't miss anything.Very informative, great presentation, speed and real knowledge of his subject. New subscriber here, for sure. Hubby shared video to me, so I better bake him a cake to say thank you.
I’m in my 60’s and have been a tradesman all my life in different mediums. I’ve forgotten alot and find channels like yours very helpful. Recently I’ve been welding and finding the best rust removal systems has been a chore. Some products weren’t around in the 70’s when I apprenticed so thanks for the well produced videos and super shout out for SAFTY tips.cheers
Great video! Really appreciate you explaining the carbon vs stainless and the cross contamination that can occur! Also I didn’t know about the single twisted strand wheel. I could have used that sooooo many times! Definitely buying some. Really appreciate your tool videos, I always learn something to make my projects better and/or easier! Congrats on reaching 200K subscribers, its well deserved!
I restore and sell old, often rusty, tools, so your detailed explanation of some of the available accessories was very helpful for me. Thank you! My practice, after removing the bulk of the rust from an anvil, vise, sledge, whatever, is usually to turn to electrolysis to remove the rest. I've found rust removal by electrolysis very effective, not to mention avoiding the expense, time, and sweat I'd have to spend going after a rust monster with a grinder. Anyway, I'm a new subscriber who is thoroughly enjoying your very knowledgeable videos. Thank you!
My Dad was always about safety and about loose clothing and especially around machinery. One day on one of my own jobs, I was using a little 5"disc.sander, 120v type. And guess what? It grabbed my loose T-shirt so fast! If thats not bad enough, I couldn't get my finger off the trigger!! The natural tendency is to squeeze tighter!! That's where I've heard, If you're going to touch something hot uses the back side of your hand and not the front. The tendency is to grip it???? And don't get use to using that trigger hold button, another bad habit. Always a lot of good information, Thank you! Be safe!!!
1. For most power tools or hand tools that have interchangeable bits, blades, brushes it's the quality of the bit, blade or brush that makes for quality work (& how sharp the bits or blades stay). The tool is secondary. 2. Great vid, overdue imo. 3. Congrats on 200k!!! Well deserved.
Bro great video as always, but I really want to thank you for the video that you did with the flashlight on the welding helmet . My welding abilities have improved dramatically.THANKS
Excellent Video i’ve need a Boater for over 40 years and i didn’t know about the Carbon contamination causing the Rust so Thanks i feel like i really learned something cool and more about one of my favorite Hobbies
I'm a newbie on restoration and this was a real eye opener for me! Thanks for all the great tips an heads up for safety matters! I'm a follower for sure!! Have a good one! 😀👍
Great tips. I can't emphasize how important it is to buy quality. I worked two semesters as a lab assistant teaching welding and I'd always encourage my students to buy a weiler 13131 wheel for cleaning slag. I found that a single weiler would outlast a 4 pack of harbor freight wheels for a few bucks cheaper and not throw nearly as many wires. I also recommend using a grinder with a paddle or trigger switch instead of a slide when possible. If something grabs and you panic its much quicker to turn off.
Good luck convincing anyone to use a side handle and a long body trigger grinder. I find I only need half speed for all wirewheeling, they last at least 4x longer too
@@janeblogs324 I guess it all depends what you're doing and how much risk you're willing to take. I was at a two year school where even our most experienced students are still fairly new so anything that makes it safer and easier for them is a big plus. Personally for repairs on heavily rusted large equipment with lots of caked on paint and grime I like my makita 9005b that won't stall even with me leaning on it. In the shop on everything else I tend to use die grinders and a much lighter touch. I don't have variable speed grinders, but I do find that pressure makes a huge difference in how long any wire or abrasive lasts.
Excellent video and perfect timing, Chris! Now I can surprise Lucas by using his wire wheel without him having to teach me! 😉🙌🏻🙌🏻 you da best! Thank youuuuuu! 🙏🏼☺️
I had a flat knot wheel on a 4-1/2” grinder grab Amy apron and wrapped itself in a split second and slammed into my fellas. Around 25 years ago but I’ll never forget it and it never happened again Making polished aluminum diamond plate for Binghamton Fire Department trying to clean the black soot off the welds inside the boxes.
Congrats on 2K! Just finished using a wire wheel on an anvil and although I had good PPE I found the sparks could get around the sides of my safety glasses. Good tip on the face shield.
Excellent video on wire brushes using Angle Grinders. I have 5 Angle Grinders, which allows me the luxury of using one with a Cutting Wheel, Another Grinding, and yet another for Wire Brushing. The 1/4 inch Right angle Grinder from Milwaukee is also extremely handy. Thank you for this video and Happy New Year.
Great video on wire wheels, I've been using different ones for years. Thanks for including the safety topic of them. A few years ago I had a wire that had to be surgically removed from my thigh because it came out of the cup. Have a great day.
Congratulations on 100,000 subs ! Liked this one . Have made some of your projects easy to follow your leadership. By far my favorite is my vise/striking Anvil stand use it daily. Keep them coming. Happy new year.
Great video Chris! I use wire wheels all the time, but I’ve never seen the single point wire wheel thingy, I know there’s a few times I could of use something like that! Happy New Years
Always love your content and really appreciate your in-depth explanations! Looking forward to the next year of vids- keep'm coming- and keep up the great work! Happy New Year!
Nice work. Thanks for sharing your knowledge. I will probably watch this video four or five more times. I am working on a metal R.V. gate that is taking me forever, mostly because I don't know what I am doing and the angle grinder scares the crap out of me. I have a dozen or so wire wheels, cups, this and that. But I don't know how to use them.
Grinders with a paddle switch or foot switches are always more safe than an on and off toggle type switch. It’s hard to find off switch when it’s twisting up into something. Got suggestion from Scoutcrafter
Yeah i bought one of those wire wheels for my angle grinder for the first time cause i wanted to use it to remove the paint from my mini bike frame and fenders and after about 15 minutes of use i started feeling like i was being stung by wasps lol. Had pull strands of metal wire out of my arms and pants legs. But they do remove the paint pretty decent just takes a while of doing small sections at a time. Gonna try the scotch brite pad next and see if that works any better.
I learned something today. Great tips as I used to believe the only real way to remove corrosion was with a grinder and a grinder wheel. I need to get one of those Milwaukee variable speed grinders. Thanks for sharing and a nice way to finish out 2021.
Happy New Year. Here's to a great new year ahead for you an your channel. Great video today Chris. Very helpful and definitely information and helpful video. Keep up the great craftsmanship and hard work my friend. Keep making. God bless.
Good stuff...thanks for the vid. I noticed that you don't wear gloves even though you are very safety conscious. I know there are two schools of thought on wearing gloves while using a bench grinder or other type of grinder. Funny thing is there are expert and professionals on both sides of this.
Second relevant video I've watched from you. Really like your shop. LOL! looks like mine. Full of stuff.! Just bought a new old truck and looking for easier ways to bring it back to life. Bought some knotted wire wheels and they work for my purposes. More information like this is very helpful. Murphy has been teaching me about brushes and softer vs. harder types. Love the brass infusion. does it improve rust resistance? Now subscribed. ( afterthought flap discs and flappers?)
I'm going to add another bench grinder abrasive to your list that works great for final finish work on delicate items. Daisy nylon wheels. Available in larger sizes than Dremel wheels and can be stacked for a wider contact area. I keep a 1/2 inch stack of 320 grit 4inch diameter daisy wheels on a variable speed bench grinder for thin or sensitive pieces that need a gentle pre-polish before buffing. ✌ 😃
8:33. Been there done that! Wire wheel kicked back and grabbed my shirt and wound it’s way up to my face shredding my chest in the process. Not one of my finer moments.
SAFETY: My heart lept into my mouth when I saw you with the lump hammer head at the bench wheel WITHOUT leather gloves... You stress protection, which is great, but personally I go the step beyond and wear leather welders gloves whenever I'm using a wire wheel on anything. Take it from me, and this has only happened once, its a very sobering moment when your leather glove touches a rotoating wire wheel... think ambulances and extra vigalence from them on. But thanks for informative vids, I'm enjoying them
Hey I got a flat twisted wire brush cs and I’m using it on thick steel but I find it creates little pits in my welds and that will a crimped brush work better
What would you recommend for cleaning up plated fasteners? Often you need to remove old dry loctite, gunk, or bits of rust but using a steel wire wheel would quickly strip all the remaining protective plating and cause it to rust super quick! I was thinking of using a soft brass (not brass coated steel) wire wheel on the bench grinder, but worried that it would still do damage to the plating? I guess one of the nylon wheels could work?
Nice video on explaining wire wheels. I have am interested in teaching myself hobby welding. I want to attempt to make small metal "stuff" not art so much, just stuff like making airplanes from sparkplugs, those little metal statues made from old hand tools, wrench J hooks, things like that. I purchased a new Hobart 210 MVP welder which i need to learn how to use. Would you know of some videos or web sites for people showing how to make hobby welding items like i mentioned? Thanks a bunch.
If you have never used a wire wheel, it can be the most dangerous attachment you will ever use. Before anyone disputes me, I have been using them for over 40 years in industrial construction and maintenance. Come very close to being killed by one when it caught my tee shirt and wrapped it around my neck strangling me. The brushes throw wires everywhere. I have dug them out of my clothing and body. You wear safety glasses, a shield, shirts tucked and stay on alert at all time. That also includes the people within 20 plus feet of you!
Great video! Do you find that brassing the steel prevents rust? Also, I would add to not be in a hurry. Baring down on your wheel to make it strip faster will only damage the wheel by bending the wire threads and shorten the life of your wire wheel. Hit it with some WD-40 after use to prevent rust.
Thanx fot this great video really and appreciate your in-depth data, i've a situation here and i need your advice for a newbie like me i want to strip my old car paint to metal, it's my 1st project, so i've the time and i don't mind going slow, so i bought mini grinder with max rpm 3200 and intended to run these cups smoothly and nicely. what's your advice, could it do the job and what type of cups should i use or should i use 3M Scotch-Brite Clean & Strip XT Pro Disc for better finish and safer metal results. thank again man.
I enjoy watching your videos. I have a question about drill press chucks. I have a Delta 16 1/2 Floor Stand with a keyed Jacobs JT3 chuck. I'm thinking of going to a keyless chuck. Can you recommend a good chuck that wont break the bank? Albrecht chucks cost more than the drill press did. Jacobs chucks are now made in China. I've been leaning towards a Rohm chuck, but I'm still not sure. Also, should I consider changing to link belts? Happy New Year! Bob
Thanks for watching!! Check eBay for a chuck you can find great deals on albrecht and NOS Jacobs chucks. I’ve have great luck with the Chinese keyless chicks on amazon. Check your runout when you get it and if it’s no good, return it! Good luck!
I noticed the milwaukee right angle die grinder really doesnt like prolong high speed usage with the wire wheels, my bearings and contacts are already going on mine because of it... dark shop wisdom tip is to throw a roloc back on it and lean into more than usual and re set the bearings... seems to work if you get it hot enough (do not try at home)
Really great video. Exactly what I was looking for and a sensible speed of covering the information. In my specific application, I am wanting to clean up some particularly bad parts of a galvanised boat trailer that goes in the sea (salt water!). Have you any suggestions please? Keep up the excellent work. I've subscribed so I can browse and find some other interesting videos at my leisure.
Hi! Good video. I'm new to the confusing world of angle grinders. What type of wire brush would one use to remove paint and rust from a detailed-but not excessively detailed-wrought iron porch columns? Thanks for the help!
Great video, was wondering why so many steel wheels are plated with brass instead of being an alloy of brass to make it tough and durable, whats the purpose of the brass plating on the steel wire.
im just about to buy a carbon steel twisted knot wire brush or 2 for my grindette, its just to prepare lower control arms for painting while i am replacing vehicles subframe , i dont think i will have access to a media blaster this time
thanks Great video and respirator is a excellent idea. Curious if brass wire wheel has advantages over steel wire wheel? Can you use the brass wire wheels on steel or cast iron?
Just came across this video, first one I've seen from your channel. I learned a few things about wire wheels - thanks for that. You mentioned PPE as wires can fly. I do have a question though, why are you not wearing gloves?
Gloves are dangerous when using tools that spin like a wire wheel. They can get caught and be really hazardous. I usually don’t wear gloves when using something that could catch the gloves and mess up my hands. If I want to protect my hands from dust I’ll wear nitrile gloves to keep my hands clean, knowing they will just tear away if they get caught up.
I always wear gloves when both hands are on the tool being used such as an angle grinder. If I'm using something like a drill press or bench grinder where one or no hands are on the tool, I don't wear gloves.
![Kodak Black - Versatile 4 [Official Video]](http://i.ytimg.com/vi/VcP_1Ua__vY/mqdefault.jpg)
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
I'm a life-long maker (needlework and paper art) with zero application for 99% of the tools you use - but wow, I love learning from you! And your Handmade podcast with Derek & Paul is in my top 3, with Modern Maker Podcast & Making It. I could listen to all of you every day! Thanks for doing all you do.
I know, right! Quilter, rooky woodworker, maker here. I seriously took notes, pausing the video, rewinding with captions so I didn't miss anything.Very informative, great presentation, speed and real knowledge of his subject. New subscriber here, for sure. Hubby shared video to me, so I better bake him a cake to say thank you.
I’m in my 60’s and have been a tradesman all my life in different mediums. I’ve forgotten alot and find channels like yours very helpful. Recently I’ve been welding and finding the best rust removal systems has been a chore. Some products weren’t around in the 70’s when I apprenticed so thanks for the well produced videos and super shout out for SAFTY tips.cheers
The brass wheel on steel illustrates how a carbon steel wire brush contaminates aluminum.
Well damn, I made this whole video and never thought of it like that…
this was way, WAY more informative than i had expected!
A reminder written on your left hand and a bulky fingertip bandaid on the right. You might be my spirit animal 😉
Great video! Really appreciate you explaining the carbon vs stainless and the cross contamination that can occur! Also I didn’t know about the single twisted strand wheel. I could have used that sooooo many times! Definitely buying some. Really appreciate your tool videos, I always learn something to make my projects better and/or easier! Congrats on reaching 200K subscribers, its well deserved!
I restore and sell old, often rusty, tools, so your detailed explanation of some of the available accessories was very helpful for me. Thank you! My practice, after removing the bulk of the rust from an anvil, vise, sledge, whatever, is usually to turn to electrolysis to remove the rest. I've found rust removal by electrolysis very effective, not to mention avoiding the expense, time, and sweat I'd have to spend going after a rust monster with a grinder. Anyway, I'm a new subscriber who is thoroughly enjoying your very knowledgeable videos. Thank you!
My Dad was always about safety and about loose clothing and especially around machinery. One day on one of my own jobs, I was using a little 5"disc.sander, 120v type. And guess what? It grabbed my loose T-shirt so fast! If thats not bad enough, I couldn't get my finger off the trigger!! The natural tendency is to squeeze tighter!! That's where I've heard, If you're going to touch something hot uses the back side of your hand and not the front. The tendency is to grip it???? And don't get use to using that trigger hold button, another bad habit. Always a lot of good information, Thank you! Be safe!!!
1. For most power tools or hand tools that have interchangeable bits, blades, brushes it's the quality of the bit, blade or brush that makes for quality work (& how sharp the bits or blades stay). The tool is secondary. 2. Great vid, overdue imo. 3. Congrats on 200k!!! Well deserved.
Bro great video as always, but I really want to thank you for the video that you did with the flashlight on the welding helmet . My welding abilities have improved dramatically.THANKS
Excellent Video i’ve need a Boater for over 40 years and i didn’t know about the Carbon contamination causing the Rust so Thanks i feel like i really learned something cool and more about one of my favorite Hobbies
I'm a newbie on restoration and this was a real eye opener for me! Thanks for all the great tips an heads up for safety matters! I'm a follower for sure!! Have a good one! 😀👍
Thank you so much. I'm new at using an angle grinder and your instruction in what to use for different circumstances is very helpful. Thank You.
Great tips. I can't emphasize how important it is to buy quality. I worked two semesters as a lab assistant teaching welding and I'd always encourage my students to buy a weiler 13131 wheel for cleaning slag. I found that a single weiler would outlast a 4 pack of harbor freight wheels for a few bucks cheaper and not throw nearly as many wires.
I also recommend using a grinder with a paddle or trigger switch instead of a slide when possible. If something grabs and you panic its much quicker to turn off.
Good luck convincing anyone to use a side handle and a long body trigger grinder.
I find I only need half speed for all wirewheeling, they last at least 4x longer too
@@janeblogs324 I guess it all depends what you're doing and how much risk you're willing to take. I was at a two year school where even our most experienced students are still fairly new so anything that makes it safer and easier for them is a big plus. Personally for repairs on heavily rusted large equipment with lots of caked on paint and grime I like my makita 9005b that won't stall even with me leaning on it. In the shop on everything else I tend to use die grinders and a much lighter touch. I don't have variable speed grinders, but I do find that pressure makes a huge difference in how long any wire or abrasive lasts.
That brass trick is a new one for me. Thanks for sharing.
Excellent video and perfect timing, Chris! Now I can surprise Lucas by using his wire wheel without him having to teach me! 😉🙌🏻🙌🏻 you da best! Thank youuuuuu! 🙏🏼☺️
Good video. This carpenter learned a few things.
Thanks for watching Spencer!
I had a flat knot wheel on a 4-1/2” grinder grab Amy apron and wrapped itself in a split second and slammed into my fellas. Around 25 years ago but I’ll never forget it and it never happened again Making polished aluminum diamond plate for Binghamton Fire Department trying to clean the black soot off the welds inside the boxes.
Thank you for another helpful video man. Not many voices out there that talk about metal work. I greatly appreciate all the advice you share. 🙂
Great presentation. You are an amazing teacher. Thank you for sharing your knowledge.
Congratulations on 200k! Always enjoy your content.
Congrats on 2K! Just finished using a wire wheel on an anvil and although I had good PPE I found the sparks could get around the sides of my safety glasses. Good tip on the face shield.
*200k
Invaluable tips, thank you! 🙏😘
Excellent video on wire brushes using Angle Grinders. I have 5 Angle Grinders, which allows me the luxury of using one with a Cutting Wheel, Another Grinding, and yet another for Wire Brushing. The 1/4 inch Right angle Grinder from Milwaukee is also extremely handy. Thank you for this video and Happy New Year.
harbor freight be sellin cheap angle grinders now so everyone should be havin that
i have two nice corded and a 20v and some cheap ones for lighter duty
Great video on wire wheels, I've been using different ones for years. Thanks for including the safety topic of them. A few years ago I had a wire that had to be surgically removed from my thigh because it came out of the cup. Have a great day.
Ouch!!! I had no idea.
Congratulations on 100,000 subs ! Liked this one . Have made some of your projects easy to follow your leadership. By far my favorite is my vise/striking Anvil stand use it daily. Keep them coming. Happy new year.
All ways best Teacher DAD ♥️♥️♥️
Great video Chris! I use wire wheels all the time, but I’ve never seen the single point wire wheel thingy, I know there’s a few times I could of use something like that! Happy New Years
Always love your content and really appreciate your in-depth explanations! Looking forward to the next year of vids- keep'm coming- and keep up the great work! Happy New Year!
I really appreciate that thank you for following along!!
Great video always informative. Love brassing. Mahalo for sharing! 🙂🐒
I am trying to get more into welding type stuff. This video was very full of information I can really use. Thank you
You're so special man
Thanks for spreading the knowledge
Nice work. Thanks for sharing your knowledge. I will probably watch this video four or five more times. I am working on a metal R.V. gate that is taking me forever, mostly because I don't know what I am doing and the angle grinder scares the crap out of me. I have a dozen or so wire wheels, cups, this and that. But I don't know how to use them.
Solid rundown . Thanks
Great video informative.....thanks for the brassing demo.....def gonna use that !
Thank you for your very informative videos for newbies like me!👍
Grinders with a paddle switch or foot switches are always more safe than an on and off toggle type switch. It’s hard to find off switch when it’s twisting up into something. Got suggestion from Scoutcrafter
Yeah i bought one of those wire wheels for my angle grinder for the first time cause i wanted to use it to remove the paint from my mini bike frame and fenders and after about 15 minutes of use i started feeling like i was being stung by wasps lol. Had pull strands of metal wire out of my arms and pants legs. But they do remove the paint pretty decent just takes a while of doing small sections at a time. Gonna try the scotch brite pad next and see if that works any better.
I learned something today. Great tips as I used to believe the only real way to remove corrosion was with a grinder and a grinder wheel. I need to get one of those Milwaukee variable speed grinders. Thanks for sharing and a nice way to finish out 2021.
Fantastic practical demo….thank you👍
Thank you for watching!
Excellent video. Just the video I needed.
Happy New Year. Here's to a great new year ahead for you an your channel. Great video today Chris. Very helpful and definitely information and helpful video. Keep up the great craftsmanship and hard work my friend. Keep making. God bless.
language is great no ascent which even an asian can follow thank u for your informative video happy x mass
Thanks for the info-dump and happy new year!
Good stuff...thanks for the vid. I noticed that you don't wear gloves even though you are very safety conscious. I know there are two schools of thought on wearing gloves while using a bench grinder or other type of grinder. Funny thing is there are expert and professionals on both sides of this.
Great content as always and thanks for that great advice I always learn heaps from this channel and congrats on getting up passed 200k
Great video! The brassing trick is great! I can see that in my real near future on a project that my wife gave me less than an hour ago!
Did this to some steel barrets I made, came out with an antiqued finish. Beautiful.
@@bernardleighan3218 That’s kind of the look I was seeking. Thanks.
Second relevant video I've watched from you. Really like your shop. LOL! looks like mine. Full of stuff.! Just bought a new old truck and looking for easier ways to bring it back to life. Bought some knotted wire wheels and they work for my purposes. More information like this is very helpful. Murphy has been teaching me about brushes and softer vs. harder types. Love the brass infusion. does it improve rust resistance? Now subscribed. ( afterthought flap discs and flappers?)
Excellent introduction to the wire wheels thank you
Great comparison of wheels. Thanks for posting this content.
I need to try the brass technique! Thanks for all the great videos!
I'm going to add another bench grinder abrasive to your list that works great for final finish work on delicate items. Daisy nylon wheels.
Available in larger sizes than Dremel wheels and can be stacked for a wider contact area. I keep a 1/2 inch stack of 320 grit 4inch diameter daisy wheels on a variable speed bench grinder for thin or sensitive pieces that need a gentle pre-polish before buffing. ✌ 😃
I learned watching this. Thanks!
Thanks Chris this was very informative!
that transferring the Brass was pretty awesome will the finishhold up to the Elements.
8:33. Been there done that! Wire wheel kicked back and grabbed my shirt and wound it’s way up to my face shredding my chest in the process. Not one of my finer moments.
Thank you so much for the wonderful explanation.
SAFETY: My heart lept into my mouth when I saw you with the lump hammer head at the bench wheel WITHOUT leather gloves...
You stress protection, which is great, but personally I go the step beyond and wear leather welders gloves whenever I'm using a wire wheel on anything.
Take it from me, and this has only happened once, its a very sobering moment when your leather glove touches a rotoating wire wheel... think ambulances and extra vigalence from them on.
But thanks for informative vids, I'm enjoying them
Great info and tips!!
Very informative. Thank you.
Hey I got a flat twisted wire brush cs and I’m using it on thick steel but I find it creates little pits in my welds and that will a crimped brush work better
"It's not so great when you find them on your couch."
It's REALLY not great when your wife finds them!
What I needed to know here. Thx
Great job as usual.
What would you recommend for cleaning up plated fasteners? Often you need to remove old dry loctite, gunk, or bits of rust but using a steel wire wheel would quickly strip all the remaining protective plating and cause it to rust super quick! I was thinking of using a soft brass (not brass coated steel) wire wheel on the bench grinder, but worried that it would still do damage to the plating? I guess one of the nylon wheels could work?
Nice video on explaining wire wheels. I have am interested in teaching myself hobby welding. I want to attempt to make small metal "stuff" not art so much, just stuff like making airplanes from sparkplugs, those little metal statues made from old hand tools, wrench J hooks, things like that. I purchased a new Hobart 210 MVP welder which i need to learn how to use. Would you know of some videos or web sites for people showing how to make hobby welding items like i mentioned? Thanks a bunch.
What tool are you using with the CS knot SINGLE TWIST? Also, what speed does it run at? Thanks for a great video.
Great information, thank you
If you have never used a wire wheel, it can be the most dangerous attachment you will ever use. Before anyone disputes me, I have been using them for over 40 years in industrial construction and maintenance. Come very close to being killed by one when it caught my tee shirt and wrapped it around my neck strangling me. The brushes throw wires everywhere. I have dug them out of my clothing and body. You wear safety glasses, a shield, shirts tucked and stay on alert at all time. That also includes the people within 20 plus feet of you!
Just use a grinder with speed control. You get 1/4 the torque at 1/2 speed. The grinder will stop if it catches something
Brassing is a great finish.
Great video! Do you find that brassing the steel prevents rust? Also, I would add to not be in a hurry. Baring down on your wheel to make it strip faster will only damage the wheel by bending the wire threads and shorten the life of your wire wheel. Hit it with some WD-40 after use to prevent rust.
Thanx fot this great video really and appreciate your in-depth data, i've a situation here and i need your advice for a newbie like me
i want to strip my old car paint to metal, it's my 1st project, so i've the time and i don't mind going slow, so i bought mini grinder with max rpm 3200 and intended to run these cups smoothly and nicely.
what's your advice, could it do the job and what type of cups should i use or should i use 3M Scotch-Brite Clean & Strip XT Pro Disc for better finish and safer metal results.
thank again man.
Hadn't seen that fan type before, still using the other styles, looks like it could be quite versatile...
I enjoy watching your videos. I have a question about drill press chucks. I have a Delta 16 1/2 Floor Stand with a keyed Jacobs JT3 chuck. I'm thinking of going to a keyless chuck. Can you recommend a good chuck that wont break the bank? Albrecht chucks cost more than the drill press did. Jacobs chucks are now made in China. I've been leaning towards a Rohm chuck, but I'm still not sure. Also, should I consider changing to link belts?
Happy New Year!
Bob
Thanks for watching!! Check eBay for a chuck you can find great deals on albrecht and NOS Jacobs chucks. I’ve have great luck with the Chinese keyless chicks on amazon. Check your runout when you get it and if it’s no good, return it! Good luck!
I noticed the milwaukee right angle die grinder really doesnt like prolong high speed usage with the wire wheels, my bearings and contacts are already going on mine because of it... dark shop wisdom tip is to throw a roloc back on it and lean into more than usual and re set the bearings... seems to work if you get it hot enough (do not try at home)
Really great video. Exactly what I was looking for and a sensible speed of covering the information.
In my specific application, I am wanting to clean up some particularly bad parts of a galvanised boat trailer that goes in the sea (salt water!). Have you any suggestions please?
Keep up the excellent work.
I've subscribed so I can browse and find some other interesting videos at my leisure.
Good information. Thanks
I like those wire wheels they remove paint and rust I have one of those
Nice, informative video man. Good job! Subd
Thank you so much for this video
Great video! What brand of wire wheels do you recommend? I just used some and the strands kept flying off.
Great video. Thank you.
Hi! Good video. I'm new to the confusing world of angle grinders. What type of wire brush would one use to remove paint and rust from a detailed-but not excessively detailed-wrought iron porch columns? Thanks for the help!
Great video, was wondering why so many steel wheels are plated with brass instead of being an alloy of brass to make it tough and durable, whats the purpose of the brass plating on the steel wire.
Great video
im just about to buy a carbon steel twisted knot wire brush or 2 for my grindette, its just to prepare lower control arms for painting while i am replacing vehicles subframe , i dont think i will have access to a media blaster this time
Nice, thanks for the brass trick, wonder what would happen with some of the black patina metal finish on top of that, maybe something cool…
I purchased these 1” knotted steel wire brushes for a drill. When I try to use it, it seems hard to control. Any ideas what I might be doing wrong?
I thought they were all for sticking wires in your face! Who knew?
Hello, can I use the copper wheel on a steel saw or a screw drivers.... Thanks for the idea...OORAH!!
Great video thank you
Very helpful thank you 🤙🏻
thanks Great video and respirator is a excellent idea. Curious if brass wire wheel has advantages over steel wire wheel? Can you use the brass wire wheels on steel or cast iron?
Just came across this video, first one I've seen from your channel. I learned a few things about wire wheels - thanks for that. You mentioned PPE as wires can fly. I do have a question though, why are you not wearing gloves?
Gloves are dangerous when using tools that spin like a wire wheel. They can get caught and be really hazardous. I usually don’t wear gloves when using something that could catch the gloves and mess up my hands. If I want to protect my hands from dust I’ll wear nitrile gloves to keep my hands clean, knowing they will just tear away if they get caught up.
I always wear gloves when both hands are on the tool being used such as an angle grinder. If I'm using something like a drill press or bench grinder where one or no hands are on the tool, I don't wear gloves.
I like the tool tips but I would really like to see some build videos.
That explains why my one tool has little rust spots on it
Watch for cross contamination!!
well done when else would you use brass for?
first way i used a wire wheel was on a 9 and half inch 7000 rpm sears craftsman wich was a torque monster
Great Vid!
Great topic to cover! How do you like that cordless Milwaukee angle grinder? And is that a trenton anvil?