Sir I am new to your channel and after watching your few videos on electrical installation work, it has encouraged me to watch all your videos from the day you uploaded your first video on the channel and I am currently here, but I must say that you are a top notch and one of a kind. I didn't kind this kind of knowledge from school. I am getting all that I am lacking here for free. If you are not energy commission instructor (trainer) I will love you become one because you are one of the best ever. The following are my little recommendations for you to stay on top on the game: 1. Always try you engage your followers at the comment section to address their questions. 2. Always try to have good sketch of the circuit including the terminal markings like you did in this video. 3. Any relevant or good questions asked, try to treat it as a top on your channel. Stay blessed and thank you.
Good teacher please i want to practice this connections at home but my problem is the connection of the auxillary contact,the one am having here has 1 No and 1Nc so please can i use it for this connection,and please where is this circuit applicable
Simple. The hammer mill is actually driven by a motor so it's the motor that we need to wire to operate the mill. Now, before wiring, you need to check if the motor can be started DOL or if you need a star delta control. if the motor is rated below 7hp, you can start it DOL. otherwise, you will need a star delta starter. watch these videos as a guide to do the wiring. ruclips.net/video/zIJ66ZRrJQo/видео.html ruclips.net/video/cL-eV_m-A_w/видео.html ruclips.net/video/03Yjy6EvhZU/видео.html please let me know after watching the videos above, if you still need further explanation or another video . thanks
its an interesting video bt you could have first explained the wiring diagram using drawing then continue doing the practical part because for a beginner I Know it will be hard to understand what is going on
In situations where you are using two or more contactors and you want only one Contactor to work at a time. Example: forward & reverse motor control, automatic changeover switches etc.
Don't rush, take it one at a time. This is a little complex but can start with the basic ones. If you don't mind, watch these videos: ruclips.net/video/cL-eV_m-A_w/видео.htmlsi=EIgTd02WNnOwpKWC ruclips.net/video/CfTWVhMWMfg/видео.htmlsi=vq_mIT8hBLLhVKnE ruclips.net/video/h54vrYwtYy4/видео.htmlsi=YFBQyvyFKViN7yiq ruclips.net/video/taqeA51l08M/видео.htmlsi=2NKEQTKw6SVJ9t5p ruclips.net/video/RQFP3BD24Hc/видео.htmlsi=47BwWWAOBKUPeFGH
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
You are very crucial and a legend. Hoping for more ❤
Wow! It feels great to know my videos are very helpful. I will continue to do my best bro. 🤝💕 ❤️
Every electrician needs to watch and know this.
Indeed bro you are such a kind person. May you never lack nothing in kind or cash....
Sir I am new to your channel and after watching your few videos on electrical installation work, it has encouraged me to watch all your videos from the day you uploaded your first video on the channel and I am currently here, but I must say that you are a top notch and one of a kind. I didn't kind this kind of knowledge from school. I am getting all that I am lacking here for free.
If you are not energy commission instructor (trainer) I will love you become one because you are one of the best ever.
The following are my little recommendations for you to stay on top on the game:
1. Always try you engage your followers at the comment section to address their questions.
2. Always try to have good sketch of the circuit including the terminal markings like you did in this video.
3. Any relevant or good questions asked, try to treat it as a top on your channel.
Stay blessed and thank you.
@@danielteyehuago1633
Thanks Dan. That's good to hear. I have noted your recommendations as well. Thanks again.
Good job but please make a video for 3phase automatic changeover that can turn on the generator once the grid goes off
@@elohorolokpa well noted
Good teacher please i want to practice this connections at home but my problem is the connection of the auxillary contact,the one am having here has 1 No and 1Nc so please can i use it for this connection,and please where is this circuit applicable
Yes!
Thanks very much for this video
Please add the circuit diagram
Well noted.
Good presentation
Please help me by teaching on how to wire a hammer mill
Simple. The hammer mill is actually driven by a motor so it's the motor that we need to wire to operate the mill. Now, before wiring, you need to check if the motor can be started DOL or if you need a star delta control. if the motor is rated below 7hp, you can start it DOL. otherwise, you will need a star delta starter. watch these videos as a guide to do the wiring.
ruclips.net/video/zIJ66ZRrJQo/видео.html
ruclips.net/video/cL-eV_m-A_w/видео.html
ruclips.net/video/03Yjy6EvhZU/видео.html
please let me know after watching the videos above, if you still need further explanation or another video . thanks
Useful
Thanks for the comment
Great work
Sir, I'm very interesting about your video electrical installation. Y not U using mechanical interlock?
I will do mechanical interlocking another time. This is electrical interlocking.
Can this also be used in three out put automation??
@@Storythumb-p7y
As in three phase out put? Yes. It can
Thax
its an interesting video bt you could have first explained the wiring diagram using drawing then continue doing the practical part because for a beginner I Know it will be hard to understand what is going on
Thanks. I will consider that.
Please do you have a video on the electrical interlocking ans mechanical interlocking.
It's yet to come
Good Video
Thanks
How to wire a dual capacitor motor in a forward-reverse operation?
How comes this auxiliary doesn't have the NO contacts??????
Watch closely bro.
Sir very nice. This is for the reverse, forward or star delta?
You can use it for both
Sir on yhe electrical drawing you should finish the wiring with different colors please
Noted
1:18 I'm here again
❤❤❤❤❤❤
How to generator and electric work do you have drawing show me
Please send your request to WhatsApp +233209323669
Where is this applicable sir?
In situations where you are using two or more contactors and you want only one Contactor to work at a time.
Example: forward & reverse motor control, automatic changeover switches etc.
Two much hectic
Don't rush, take it one at a time. This is a little complex but can start with the basic ones. If you don't mind, watch these videos: ruclips.net/video/cL-eV_m-A_w/видео.htmlsi=EIgTd02WNnOwpKWC
ruclips.net/video/CfTWVhMWMfg/видео.htmlsi=vq_mIT8hBLLhVKnE
ruclips.net/video/h54vrYwtYy4/видео.htmlsi=YFBQyvyFKViN7yiq
ruclips.net/video/taqeA51l08M/видео.htmlsi=2NKEQTKw6SVJ9t5p
ruclips.net/video/RQFP3BD24Hc/видео.htmlsi=47BwWWAOBKUPeFGH
Pls sir can I get your contact?😊
Please it's on my main page.
youtube.com/@obloni_Electrical?si=rcPAvQbaxsMs7ciE
Please let me know if you are able to get it