Sorry for not uploading Daily Videos :( Hope you Guys Enjoy this One... For more Information: www.revealnew.com/2019/01/led-dimmer-circuit-with-lm317.html Have a Great Day!!
So heres the current plan, I have a mess of lm317 and lm337 from a couple years back, I do have a 1500W CC ps from amazon but that's cheating. I was going to control all switching with IRFZ44N on cathode side of my 100W led array. In order to dim I was going to try lm317 to swing voltage from 23VDC to 29VDC, that would be annode side. I should be able to use a 250W CC PS and switch between my 6 X 100W leds so fast you can't notice. Just using arduino mega currently.
Hi thanks for your video. I have led 32w 3000k with pri 220 vac50/60Hz 0.22A and sec constant current Dc 280mA 90-110V could you help me because i want to make same dimmer for it . Can i use same mosfet?
Hello, please can you tell me how do I do if I want use this with 50 leds. Is there a problem of current consommation ? The components don't risk to burn ? (sorry for my bad english, I'm french ;)) Thank you very much for your answer
hello bro...good work...i want to do like that but the source ( Input voltage ) is 3v or 6v and the out voltage is 12v and i want to add LDR what shall i make my circuit
Hello can I give inpute of 12 v 7.2ah Battery. ? Currently my 12 volt LEDs are getting high amount of current if I connect directly to my 7.2 ah battery .. Pls reply..
Все работает класс ... но микросхему лм 317 нужно установить на теплоотвод... под такой нагрузкой закипит и выйдет из строя...микруха держит ток 300ма без радиатора... что выше нуждается в охлаждении...
да, вы правы, но в моем случае я использовал светодиод 8W. Для этого случая нам не нужен радиатор. но для вашего случая, если вы хотите получить выход 1A, вы должны использовать радиатор. Спасибо за ваш положительный комментарий !! Не забудьте подписаться приятель :)
Sorry for not uploading Daily Videos :(
Hope you Guys Enjoy this One...
For more Information: www.revealnew.com/2019/01/led-dimmer-circuit-with-lm317.html
Have a Great Day!!
you add input voltage 9v battery and you write 12v power supply ??
So heres the current plan, I have a mess of lm317 and lm337 from a couple years back, I do have a 1500W CC ps from amazon but that's cheating. I was going to control all switching with IRFZ44N on cathode side of my 100W led array. In order to dim I was going to try lm317 to swing voltage from 23VDC to 29VDC, that would be annode side.
I should be able to use a 250W CC PS and switch between my 6 X 100W leds so fast you can't notice. Just using arduino mega currently.
Can I use exactly same led chip biut for 30W?
good! but if I have 37v cob led?(obviously with 37v feeder) can I use same circuit or need to calculate resistor and so on?
hello, can y use 1w led with a 18650 battery? thanks
what if i used a 9V battery supply instead? it would still work right? but not as bright
Can I use this for motorcycle bulbs?
transistor heat hota hai kya ?
Doesn't the LED need a constant current driver?
What about 2amps LED strip?? Will LM317 works?
Thank you , even as easy as that circuit is I'm still in aww.
Thank you so much bro... It was very useful for mi.. 😊😊
I have to make it for 5volt what resistor I have to use....?
Hi. I can use in a lamp with 9 led cree of 3w each? I need dimmer this light.
Yes bro
hello, I have a question, but does it only work with 10w LED chips?
No any led
Sangat membantu. Terima kasih.
can i use higher value resistor? what is the effect if i change it to more than 330ohms?
Can a 9v battery work on this setup?
Can I use 40W led??
And I use 30V...
the LM317 Can Give max 1.5A Now Calculate the amps for 40W LED at its full brightness and you will get your answer.
And the LM317 can give 1.25 to 37V
@@Creativecreator And at 1:17 Do I have to use different resistor..?
no don't need
@@Creativecreator thanks!!
Hi thanks for your video. I have led 32w 3000k with pri 220 vac50/60Hz 0.22A and sec constant current Dc 280mA 90-110V could you help me because i want to make same dimmer for it . Can i use same mosfet?
Valeu!
Grato!
Mais um ótimo projeto, fácil de acompanhar a montagem, esquema e etc!
Sempre perfeito!
Abraço e esse...
Boa tarde!
What is the wattage of the resistor? Is 1/4 watt enough?
can you pls modify with Auto on/Off without LDR
proyecto facil y economico, muchas gracias
could i use a 1Mohm potentiometer?
it will work
@@Creativecreator so 10 k 100k 1m, everything is OK? :-)
Yeah
Hello, please can you tell me how do I do if I want use this with 50 leds. Is there a problem of current consommation ? The components don't risk to burn ? (sorry for my bad english, I'm french ;))
Thank you very much for your answer
It will work flawlessly
@@Creativecreator Thank you for your answer. I'll try this. I made a decorative airstrip in my son's room, and he wiil be very happy thanks of you.
@@fredericgoure3705 please send me feedback after you do all that things. And tell me it is working or not....
Creative creator ok, i’ll do it. Thanks
my friend did the same. But it is only changing from 11.8v to 10.5v up to 1.25v or 1.5v how can you lower it.
Fursan Electronics hello, i think there is a mistak in this schematic. R1 has to be pluged on pin 1 of the LM317.
Yoyo Zelda thank you Let me try that way too. Because the potentiometer is burned.
Fursan Electronics you can use this schematic but you have to add a wire between pine 1 and the bottom of R1.
can we control 230V with this circuit?
good night, sorry english,
I have a led cord, 220v (christmas light) how do I dim from 0 to 100%
I want to connect 200 Led bulbs using this connection. Can i do it or not ?
Good. Like it
Please subscribe buddy 🙂
hello bro...good work...i want to do like that but the source ( Input voltage ) is 3v or 6v and the out voltage is 12v and i want to add LDR what shall i make my circuit
Can you clarify a bit..
I want input voltage 6 volt .....and add photocell ....you use 12 volt input
It will work with photo cell
How much amp loaded
Ojalas logre hacer este proyecto,felisito tu buen y
gran trabajo.
después de hacerlo etiquetarme en facebook o instragram @ creativeideas365 con tu foto
Ficou interessante eu ja tinha assistido um outro vídeo com um projeto parecido. Abraço
muito obrigado amigo !!
Por favor, assine para vídeos mais interessantes !!
Hello can I give inpute of 12 v 7.2ah Battery. ?
Currently my 12 volt LEDs are getting high amount of current if I connect directly to my 7.2 ah battery ..
Pls reply..
Can I use this circuit to 220 v light bulb ?
No u have to use a traic for this case
Очень полезная схема. Спасибо ОГРОМНОЕ. А можно вместо диодного модуля впаять диодную ленту?
awesome
This applince where used
सर ये led 5 लगाये तो कोनसा सर्किट लगेगा please
Same schematics
Use 4 led in series
Led driver circuit please with ampere control
The bond is back!!!! Hahaha
the led only turns on and off when I turn the potentiometer nob. Can anyone give me some help?
CHECK all connections
LIKE,, bro you make a drone,, I saw the picture on Facebook.
Yes, but It will take time for being uploaded because my RC Transmitter & Receiver has not come yet.
@@Creativecreator ohh,,thanks bro
Like it 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
Nice
Все работает класс ... но микросхему лм 317 нужно установить на теплоотвод... под такой нагрузкой закипит и выйдет из строя...микруха держит ток 300ма без радиатора... что выше нуждается в охлаждении...
да, вы правы, но в моем случае я использовал светодиод 8W. Для этого случая нам не нужен радиатор. но для вашего случая, если вы хотите получить выход 1A, вы должны использовать радиатор.
Спасибо за ваш положительный комментарий !!
Не забудьте подписаться приятель :)
anyone build a dimmer for a 100w led chip? YAh! totally different story.
Good .....
good job like , sir ,how to 100,200 watts LED dimmer circuit
This time you have to utilize MOSFETs
Прикольно схема впечатляет лайк от меня гаронтирован
You can use pot
Buon giorno , Volevo chiedere perchè non fa qualcosa di più carino e utile grazie
Hello can we use more than 12 volt led light? and if can't with this transistor what transistor that helps me?
Lm317 can take up to 1.5A you can connect more leds in this limit.
Of you want to use transistor then I will suggest you to go for IRFZ44N
Молодец
большое спасибо 1!
Пожалуйста подпишитесь :)
Так нельзя подключать светодиоды. Дизлайк.
Clean your soldering iron tip.
yes I will
@@Creativecreator now I realize I sounded imperative. ;)
சூப்பர்
தயவுசெய்து உங்கள் நண்பர்களுடன் வீடியோவை பகிர்ந்து கொள்ளுங்கள்
Input pe led light
Fake circuit diagram banakar youTube pe vedio bana raha he
Dirty workmanship.