Can I make this for a 24V LED? I am trying to make a dimmer for my IKEA "MITTLED" light strip for cabinets. And which components should I use in the circuit? I can't find any DYI 24V LED dimmers anywhere online, so I would greatly appreciate any help! 🙏
Hi. I want to light a 3w chip LED (sam as what u showed) and Dim it with 4v output DC adaptor (driver). Can the same circuit be used? I have a dimmer, and the LED is barely dimming when turning the potentiometer.
@@Creativecreator That's great! But can you explain what the role of the transistor in this circuit is? I've seen other circuits that can dim LEDs without the use of a transistor. I'm just curious as to what the transistor does here. Thx!
@@lalmuanawmamualchin2430 Thanks for the info. But I'm using several resistors with LEDs now and none of them are heating or smoking. I just made sure to match the resistors to the circuit's voltage and current. When would transistors need to do adjustment?
I have some pretty costly cannon lenses that I also use on sony body with adapters. This are most expensive one's 50mm f1.2L, 18-35mm f1.8 signa, 14mm f2.8mm
i made a miniature/ macket even design type My Turbine, there is few founder, and A Workshop Worker i give info On Air iam worker AT Mechanic Three AT Those Workshop i need Registrasion/ Pendaftaran Alert other say voice inside ME.
At 4:39, you need to get your schematic correct.
Collector and Emitter are in the wrong positions.
It's more than awesome
Thank you so much 🥰
@@thearchetype9829 yea I subscribed
Here a brasilian enjoying your video. Hug
Thank you ☺️
Would it be correct to say “This circuit controls the current in the LED” or does it control the voltage in the LED ?
You are right it is current 😉
What clipper are you using on holding the components?thanks...
normal alligator clip with heat shrink tubing for components sharp edge protection.
Thanks for the answer..🙂
Very beautiful projects 🌹🌹🌹🌹
Can I make this for a 24V LED? I am trying to make a dimmer for my IKEA "MITTLED" light strip for cabinets. And which components should I use in the circuit? I can't find any DYI 24V LED dimmers anywhere online, so I would greatly appreciate any help! 🙏
Fine LED project ,Thank you .
Hi. I want to light a 3w chip LED (sam as what u showed) and Dim it with 4v output DC adaptor (driver). Can the same circuit be used? I have a dimmer, and the LED is barely dimming when turning the potentiometer.
Sir please tell me Which software you are using??
Premiere Pro
👍nice😎
Very nice project
Good job
nice bro
Thank You!
Can i use any kind of 10k Resistor? or 1/2w 1% ?
Can i use bc557 pnp transistor
Love from kerala india
Yes it will work ☺️
I didn't use the middle connection with the MOSFET and it works.. the second wire just goes directly to the LED leg
Dear Brother, your C and E terminals are interchanged in schematic. The arrow symbol is Emitter not collector
Thanks,u brother.I tested it, and it works well
thanks for your wonderful insight in electronics. I love the peace out quote very cool
Thank you 😊
Olá , Mestre , nota 10 , maravilhoso vídeo !
muito obrigado
Bom dia, Mestre você é ótimo a minha nota será sempre 10 , pela sua criatividade em desenvolver a eletrônica , sempre meus parabéns você é genial 👍👏
Why don’t you use potentiometer directly? Or is there another use for the transistor?
The point of the video is to use a PNP transistor for dimming leds 😉
@@Creativecreator That's great! But can you explain what the role of the transistor in this circuit is? I've seen other circuits that can dim LEDs without the use of a transistor. I'm just curious as to what the transistor does here. Thx!
@@Calamity_JackBecause transistors act as adjustment devices for voltage and current. Resistors will produce heat and even smoke without transistors.
@@lalmuanawmamualchin2430 Thanks for the info. But I'm using several resistors with LEDs now and none of them are heating or smoking. I just made sure to match the resistors to the circuit's voltage and current. When would transistors need to do adjustment?
Transistor can handle more power like 1a 2a or more, the potentiomenter will handle 0.5a at most.
Can this circuit be used in 12 volts ?
Bro i have added a 12v dimmer in I buttom
Magnificent
Thank you 😌
Does it works on 12 v
Muito bom mano! nice bro!
Sir can you make a video of your work bench.....please
Bro u can upload audio amplifier using enhance type MOSFET
Ok next month 2nd video 😉
I'm waiting bro
Terima kasih untuk ilmu yang hebat#indonesiafans
sama sama :)
3v 5a suport ?
В место лампочки поставить динамик маленький для увеличения для входа для наушников громкость...
nice
Thanks
thanks a lot
👍👏👏👏👏
Camera name please 🙏🙏
Canon 200d, Sony a7iii
But the magic is in lens 😁
@@Creativecreator tell about of lens
What the magic ❓❓❓
I have some pretty costly cannon lenses that I also use on sony body with adapters. This are most expensive one's
50mm f1.2L, 18-35mm f1.8 signa, 14mm f2.8mm
Ни чего не понимаю на английском языке. Можно изучить, но по видео всё понятно, жаль, что не на русском языке.
Is good,..
Linear dimmer using transistors... Just sucks, is only suitable for low power LEDs, don't try it with high power dimmers or the transistor will burn.
Do you think lm2596 works with 5V input and 3W 3 Volt Led?
Ok 👍🍉🤣
i made a miniature/ macket even design type My Turbine, there is few founder, and A Workshop Worker i give info On Air iam worker AT Mechanic Three AT Those Workshop i need Registrasion/ Pendaftaran Alert other say voice inside ME.
Ok
bagus
Terima kasih sayang
Show