Very effective video brother, I took it recently, playing Hawaiian/ Slide Guitar...looking for getting noiseless Clean Channel with good REVERB..Seeking help pl
@@MrMitter Yes Sure Brother. please continue this , i am waiting for so long.... or you can make a detailed video how to make patches. it will be more helpful💛.
Hi, great instructional video.. I have Zoom g3xn, i do not understand why some patches i make have different volumes.....like some patch volm are higher and some lower even when i put the amp volume all same...
you have to adjust the overall patch volume to get the desired balance. A lot of factors influence the overall tone level which can be easily bridged by using the patch level. Hope that helps :)
Hi, is Your unit built before other ones, yet bought as new in its box? Probably it has an old firmware, as happened to some G5n owners. I have a G5n, but luckily had a sticker on the box telling me it was the last firmware updated, gaining more amplis, cabinets and effects and optimized computational power (30% more than before..). Not so many, but better more than nothing, and more, the last firmware update solved a volume issue, maybe the one your unit suffers. Go to Zoom site and check for latest documents, editing software and firmware. Follow the updating instructions if You need to mount the latest firmware. Maybe You only need this.
Great stuff...one thing I noticed that you are not using any compressor in the signal chain...is it because you want to put compressor in the daw while post processing or any other reason?
Thanks bro. I usually don't use any compressor for my hi-gain solo tone since the dynamics are usually even. I like to control the dynamics with my picking hand and the lack of a compressor facilitates that to me much more efficiently. Moreover, G3XN has 7 slots of effects hence I would have to get rid of something from the chain which is tough since all the effects used are essential for the sound :)
dada tone ta sera. pls reply. exactly tumi j set up ta korecho same set up korechi ei tone ta. but amar gear gulo alada. tar jonno hyto flavour ta asche na.kon kon parameter gulo change korle valo hoy ektu bole debe pls ? ami use korchi - processor same as u, guitar jackson JS11,amp marshal mg10. r interface a korle focusrite 2i2 r yamaha HS5 monitor, r cable earniball r planetwave er
thank u for the question. Guitar alada holey definitely the tone will also be a little different. Difficult to say ki change korte hobe. Please email me once, we can talk there. Thank you :)
Subscribed instantly. I was looking for exactly this guitar tone what you just played. Can you suggest any guitar which gives similar tone but with Floyd rose/floating bridge tremlo... I am tired of searching it over net... Thanks for uploading video
Thanks bro. No I don't use reverb for my live hi-gain solo tones coz it may muffle the soundscape of the overall song. For a low gain tone, however, I use some reverb. In the studio I use a little bit of reverb while mixing using some vst..
@@MrMitter sir, sorry to bother you. What would be best, guitar amplifier (20 watt blackstar) or studio monitors presonus eris 3.5 or some other. Please advise.
In some patches i am getting only 3 blocks to create a tone.. and in some only 5 i cannot create the tone i need for certain songs.. and i tried creating this tone i am getting just 3 blocks not 7 i got a zoom g3xn.. please help.. Can you please create a tone for always with me always with you by Joe satrianj please.. 😄🙏
sir i have done the firsts fingerstyle but i need to learn the solo as you teach soo good no matter how tough it is you explain it so easily that s why i was telling you to teach
I recently bough Zoom G3xn. This short episode helps me a lot.Thank you
Glad i could help. Thanks for stopping by. Have a great time! 🙂
Very effective video brother, I took it recently, playing Hawaiian/ Slide Guitar...looking for getting noiseless Clean Channel with good REVERB..Seeking help pl
How to contact you pl help
Thank you for your kind words ❤️ please dm me on insta. @mrmitter
Thankyou bro, i found only you helping on whole youtube... waiting for new patches, please continue this G3Xn Patch series.
So glad bro! Yes I've been off from YT for various reasons. But I'll resume this G3XN series again in a few weeks! 🙂
@@MrMitter Yes Sure Brother. please continue this , i am waiting for so long.... or you can make a detailed video how to make patches. it will be more helpful💛.
@@princepodwal9395 For sure brother. I'll do some of that kind as well 🙂
Nice video bro. I never quite understood what does the PRSNC do. Could you enlighten?
Sir, can you do tutorial for zoom g3xn on how to change dirty to clean sound quickly and smoothly, to be used on Praise and Worship for church.
Hey why not! I'd love to :)
I am getting this processor delivered within a day or two..thanks for explaining it so properly..
Thats amazing!!
Hi, great instructional video..
I have Zoom g3xn, i do not understand why some patches i make have different volumes.....like some patch volm are higher and some lower even when i put the amp volume all same...
you have to adjust the overall patch volume to get the desired balance. A lot of factors influence the overall tone level which can be easily bridged by using the patch level. Hope that helps :)
@@MrMitter thanks. Its my first processor and most of the time i really dont know what I'm doing and your video was really helpful.
@@claylespool6041 I'm really glad i could be of help to you! You'll have a great time with this beautiful processor I'm sure :)
Hi, is Your unit built before other ones, yet bought as new in its box? Probably it has an old firmware, as happened to some G5n owners. I have a G5n, but luckily had a sticker on the box telling me it was the last firmware updated, gaining more amplis, cabinets and effects and optimized computational power (30% more than before..).
Not so many, but better more than nothing, and more, the last firmware update solved a volume issue, maybe the one your unit suffers. Go to Zoom site and check for latest documents, editing software and firmware. Follow the updating instructions if You need to mount the latest firmware. Maybe You only need this.
@@littlebritain64 okay. I'll do this
Great stuff...one thing I noticed that you are not using any compressor in the signal chain...is it because you want to put compressor in the daw while post processing or any other reason?
Thanks bro. I usually don't use any compressor for my hi-gain solo tone since the dynamics are usually even. I like to control the dynamics with my picking hand and the lack of a compressor facilitates that to me much more efficiently. Moreover, G3XN has 7 slots of effects hence I would have to get rid of something from the chain which is tough since all the effects used are essential for the sound :)
dada tone ta sera. pls reply. exactly tumi j set up ta korecho same set up korechi ei tone ta. but amar gear gulo alada. tar jonno hyto flavour ta asche na.kon kon parameter gulo change korle valo hoy ektu bole debe pls ? ami use korchi - processor same as u, guitar jackson JS11,amp marshal mg10. r interface a korle focusrite 2i2 r yamaha HS5 monitor, r cable earniball r planetwave er
thank u for the question. Guitar alada holey definitely the tone will also be a little different. Difficult to say ki change korte hobe. Please email me once, we can talk there. Thank you :)
Sir pharse patch ke parameters send kijiye zoom g3xn ke..... plzzzzzzzzzzz
Great video dada.
Bespeco ki Valo?Ami use kore thokechi.1week o jayni
nah bro. they are good as long as they last which, sadly, is a very less span.
Great job man... giving nice explanation...
It was great demo coco da!! 💛loved it & also thanks for explaining about the effects!!🙂
Thank u bro!!
Absolutely stunning my friend and great tone ✌️Great demo!
Thank u so much bro :)
Wow!
I like how you explained each parameter.
Great work.
Good luck.✌🏻
Thank you so much ❤️
Wao
Darun laglo...
Thank u :)
Subscribed instantly. I was looking for exactly this guitar tone what you just played. Can you suggest any guitar which gives similar tone but with Floyd rose/floating bridge tremlo... I am tired of searching it over net... Thanks for uploading video
Thank you so much for your kind words 😊
This tone can be achieved with any guitar with alcino magnet pickups (les paul style)
Great information Bro, thanks for sharing with detail, hope you will share more info in future with more patches 😁😁❤️
thanks bro! absolutely!! coming up with more!!!
How to change the P.P delay to 2x, my option is set to 16x can't change it
hi. you need to rotate the knob of the TIME in the delay effect to change ta it to 2x
please make a review of those mackie crs behind..just need to buy ...and i want to contact u for that
These are amazing monitors for the price! Go for it!
Thank you so much Rajarshi da. It helped me a lot. Thanks for your kind demonstration 🙏🏻❤️
Thank you for your kind words! Do subscribe to the channel and share this with anyone who might find it useful :)
@@MrMitter sure!!😊😊
Awesome .... But I am wondering why there is no reverb ?????
Thanks bro. No I don't use reverb for my live hi-gain solo tones coz it may muffle the soundscape of the overall song. For a low gain tone, however, I use some reverb. In the studio I use a little bit of reverb while mixing using some vst..
Well..bro. ..iam searching for A long time.....for this tone..
Make so many videos on zoom patches
For sure man :)
Sir how to use double looper in g3xn plzz sir explain
Sure let me try this first!
Okk sir
Will fender original series 1/4 cables do the job or one needs better cables than that ?
these are good cables :)
Made my day🤟🏼
Thank you ♥️
Thank you dada for this wonderful video 🥰🥰
Anytime bro :)
Awesome work♥️♥️♥️
Thank you :) do subscribe to the channel and share this with your friends :)
Sir please make Slash patch on this processor ❤️🙂
done bro :)
Thank you brother peace this guitar fix is pain but I
Love it
thanks so much :)
Hi sir, can we connect studio monitors directly to the zoom g5n. I don't have a computer. Please reply
Hi. yes you can. Connect the monitors to the L/Mono and R ports of your Zoom G3XN and youre good to go 🙂
@@MrMitter sir, sorry to bother you. What would be best, guitar amplifier (20 watt blackstar) or studio monitors presonus eris 3.5 or some other. Please advise.
@@ivansmathew9998 I personally would prefer studio monitors over guitar amps. Presonus is really good
@@MrMitter Mr. Mitter thanks so much for your help. God bless you.
@@MrMitter hello sir, how to connect, l and r trs of zoom g5n to two rca of Studio monitors or to two trs input of the monitors. Thanks.
Magical fingers 💜💜 supper energetic 😌😌😌
Thank u :)
In some patches i am getting only 3 blocks to create a tone.. and in some only 5 i cannot create the tone i need for certain songs.. and i tried creating this tone i am getting just 3 blocks not 7 i got a zoom g3xn.. please help.. Can you please create a tone for always with me always with you by Joe satrianj please.. 😄🙏
Hi bro. If you see there are less than 7 blocks, you can add them at the edit menu quite easily. 🙂 I will try the Satch tone for sure 😀
@@MrMitter thank you so much.. can i DM you on instagram if i need any help?? I am following you.. 👍🏻😁
@@MrMitter Sir i tried editing. It does not happen. The signal chain does not move after the 3rd block? Is it because i haven't updated my processor??
@@joelmenezes1797 please DM me on insta. will try to help you out :)
This is brilliant
Thanks re
Hey Soo I'm getting this processor for like 12000₹ is it worth it or like should I wait for offers??
its still a good deal! you can get it.
@@MrMitter hey another question? does the wah work as sound control?????
@@joshuatmn if you mean volume control, then yes it does
@@MrMitter yes volume control 😅 thx btw 👍🏻
Thanks a ton for this video 🙂❤🤘🏻
My pleasure :) do share it with the people who might be benefited :)
That goes without saying brother 😊 ✌🏻
You need to do more g3xn patches videos!!!!
on it bro!!! coming soon :-D
Hello, how much does one of your musical arrangements cost? I'm interested
Hello, please email me at coccoguitar@gmail.com for further discussion. Thanks.
Thanks a lot for this one, sir. ❤️
Anytime bro! :)
Nicely explained ...❤️
Thank u so much! Do share it and subscribe to the channel :)
Please sir gt 1 patch settings solo tone
yes for sure :)
@@MrMitter thanks sir
Great tone 🙏❤
Thank u :)
lead ta jeta play korle ,otar name mention koro pls 🙏
Impromptu solo bro
Bro.. This configure apply in my processor
Yes
@@MrMitter my prossesor in zoom g1xon
@@petukguitarist9071 okay. you can certainly get a tone closer to this one.
@@MrMitter so what effect you can inserted
great tone❤❤.thank you😍😍😍
❤️❤️
Hi sir I am Shashank from tiim
sir can you teach it's my life
hi Shashank. There are plenty of tutorials on youtube already. You can easily find one.
sir i have done the firsts fingerstyle but i need to learn the solo as you teach soo good no matter how tough it is you explain it so easily that s why i was telling you to teach
I am not a Queen fan, but the sound to me is so similar to the one created by Brian May.
i'll take that as a compliment :)
Dami mong satsat
21th liker❤️
20th liker☺️