The support page on thundermax shows what base maps to choose from and then tune from there. Maps are based off cam mfg. Make sure the pipe has wide band o2 sensor bungs!
Really depends on your height. Kraus has an option to mount the speedometer and tachometer closer to the rider as well that makes the screen easier to see.
@@grandtetonharley-davidson8690 Expensive - but not terrible. My local dealer wants $1200+ just to install a set of apes. That's not including parts which puts it closer to $1800. Did you swap the cam plate while you were in there installing that new cam? I couldn't tell.
Have the exact bar setup on my RGS. They’re expensive to do but I’ll never ride with any other setup again. They fit me perfectly and I have great control not only at high speed but at low speed as well.
Cool bike, I put Factory 47 12" bars on my grey RGST and wondering if I should have went with the Kraus setup instead cause I am having trouble finding a comfortable position for the bars almost every time I have ridden the bike I have come home and moved the bars again. I had Biltwel riser with pull back and similar style bars on my Low Rider S and really liked that setup.
Fantastic Job, everything turned out Awesome!!
Thank you! Cheers!
한국에는 이렇게까지 튜닝 하는 곳이 없다.ㅠㅡㅠ 부럽고 대단하다👍
Great combo ,,,,
Can anybody tell me does this make the bike out of compliance on the warranties
Yes it does
Love it. Thinking of adding the ThunderMax to my bike width a Star 30/30 cam and HPi pipe. Are there many maps to choose from?
The support page on thundermax shows what base maps to choose from and then tune from there. Maps are based off cam mfg. Make sure the pipe has wide band o2 sensor bungs!
Awesome build! Do you recommend choosing cam prior to engine size when selecting the map in Thundermax?
Get rid of that stock air filter and get S&S Stinger air filter! Made my RG ST feel like it was on steroids! 😂
Does that ECM still allow the RDRS system to work properly? Im interested in doing this build you guys did to my ST too
Yes RDRS will still work with this build!
What's the total price for the bike and upgrades out the door?
Roughly $7,100!
@@grandtetonharley-davidson8690not bad
Is the screen still visible with the Kraus handlebar?
Really depends on your height. Kraus has an option to mount the speedometer and tachometer closer to the rider as well that makes the screen easier to see.
Was this able to have been done keeping the warranty intact? Hdhd in Boise will only use a SE tuner
The warranty was voided with the work done to this bike!
What does something like this cost to do to your bike
Roughly $7,100!
@@grandtetonharley-davidson8690 Expensive - but not terrible. My local dealer wants $1200+ just to install a set of apes. That's not including parts which puts it closer to $1800.
Did you swap the cam plate while you were in there installing that new cam? I couldn't tell.
the ST 2022 mounts a high performance cam, did you see a gain difference with the redshift 468?
Yes, but it was also paired with a ThunerMax tuner.
What kind of bar set up did the st get
It's a Kraus Moto setup.
@@grandtetonharley-davidson8690 right was that a 10inch kick back or 8
Is it me.or that exhaust is quiet? So you say RS 468 is best TQ cam for otherwise stock 117 motor?
Its the best for reliability and performance in our opinion! The exhaust is decently loud just might not have translated as well through video!
What one minute. That bike had a
thunder max tuner installed at a Harley Shop. When did this become non warranty killing. Is it true?
It voided the warranty.
All good, I’m sure you guy’s warranty the work you did
Love the bike hate the bars
T-bars aren’t everyone style but can add a great level of precision in the handling!
Have the exact bar setup on my RGS. They’re expensive to do but I’ll never ride with any other setup again. They fit me perfectly and I have great control not only at high speed but at low speed as well.
@@antoniocampos6627Hi do you have the 10inch pull back with raptor plate and how tall are you thanks.
@@peterdj1942 no I just have the wolf one setup with a 3 inch pull back and I’m 5’7.
Cool bike, I put Factory 47 12" bars on my grey RGST and wondering if I should have went with the Kraus setup instead cause I am having trouble finding a comfortable position for the bars almost every time I have ridden the bike I have come home and moved the bars again. I had Biltwel riser with pull back and similar style bars on my Low Rider S and really liked that setup.
We really like the Kraus setup and have used it on our Bagger Racing League race bike. Customers seem to really like the Kraus setup as well.
I have the Kraus front end with their 10 inch risers and bars on my 2020 SGS and I love it.
If you don’t like your bars. I have a RGST. Went with fxr motorwich 12 inch bars. To me, best of both worlds. $389. Highly recommend.
@@Levi_9_eleven slowly getting used to them but unsure if I'll keep them too be honest
Its another $70 for tappet covers. How you gonna do all that and not do black tappet covers?
Always more little details you can do right! To each their own
35k set up and no live dyno tune......