@@HermeticChaosofficial The denominator has to change when your measurement changes and you have to keep these fractional conversions in your mind to have a proper understanding of the size. This is insane.
Super easy to use with all the buttons and functions… Also, that is not to mention the super easy to understand imperial measuring system that is used. Who needs decimals when you can have precision fractions. I don’t know how we have managed with such rudimentary tools and metric measurements for so long.
It's cool but there are two problems 1. A normal tape measure is still faster 2. It's not actually necessarily more accurate; if you measure 20cm with the same measuring tape, it will be even. It might however be useful for smaller scale and/or hard-to-get places, if you can make the band motorised (so that it goes in and out on it's own, possibly even calibrated to stop when it hits something) also probably more useful for imperial, because those numbers are way out of wack haha. For metric you rarely need more than meters/centimeters/millimeters and all of that fits neatly on a measuring tape.
We love our 957mm wide opening! By the way why is your base track all broken, how are you supposed to screw board to that? Also why do you have your self drillers sticking out of your door jamb? As former light-gauge engineer I'm pretending not to see!
This is right on par with digital calipers in terms of unnecessary digitization of analog equipment. If you can't read a tape measure, you shouldn't be using one. If you need a laser to tell you where you're measuring from, you're holding the tape too far from the thing you're measuring
Now tilt it 15 degrees to the left and line up the green line, the measurement will be different. Unless you are measuring the laser across a true 90degrees and measuring as close as you can to the reference point, then the measurement is not going to be as accurate. Point being you need to measure flat to flat, not corner to corner.
Imagine this thing’s battery dies. Then it’s just a chunky, unhandy, heavier and also noisy tool that takes way too much space and is way to expensive for what it’s supposed to do: MEASURING 😂
That right there will make doing sheet rock the best thing in the world, but I had a crew. Oh my gosh would have them. They have a back up one if their first one broke.
How expensive do you want your tool to be?
YES!
It's only expensive until it's the norm. That's progress.
How used up and dead do you want your BOT comment to be
YES
$250 at Amazon? I think I will stick with my normal tape measure
But math hard 🤤
😜🤣
Will you drop the amazon link?
The one I found on Amazon is not like this 1 I did not find this specific 1 on Amazon anywhere.
One sec
Especially considering I go through a tape a year.
Gosh, 11/16ths, that makes total sense, the imperial system is so consistent and easy to work with
I'd rather work in metres still
😂😂 👍
@@snapped4433 It was a joke lol
It is easy.
@@HermeticChaosofficial The denominator has to change when your measurement changes and you have to keep these fractional conversions in your mind to have a proper understanding of the size. This is insane.
John Wick’s measuring tape be like:
Super easy to use with all the buttons and functions…
Also, that is not to mention the super easy to understand imperial measuring system that is used. Who needs decimals when you can have precision fractions.
I don’t know how we have managed with such rudimentary tools and metric measurements for so long.
Metric would be nice but we aren't there yet... That technology is hundreds of years away... and ago 😂
We got the imperial system from Britain, but thanks to pirates. We stayed while everyone else change the metric
When you remember time is also measured in dozens
Very useful precision measuring tape.
For people who have an IQ of
Seems like it would not last long on a construction site
😢🎉
Tidak bertahan lama karena dicuri😅
"Hey can I use that real quick?"
**gets decked in the teeth **
And that's how you keep your million dollar tape measure.
Um maybe take care of your tools? Coming from a union welder
Slowass union worker@@ericlakemaker9910
Bro can take measurement of a building with one Go
That was quite a bit more work than just using a laser distance measuring tool.
I'm getting one of those for Father's day!
When your TV remote doesn't work after the contractors left
Explain it 😑
Wow , we appreciate this new creation
Inspectors favorite tool, on par with thermal imaging the whole house 😂😂
957mm in the rest of the world😂
This device is very cool and practical❤❤❤
“i forgot to charge my measuring tape”
If you show up to a job site with that measuring tape you're getting clowned on
When the tape breaks and the user forgets how to read a normal tape measure.
Really cool but forgetting to charge your tape measure the night before could be detrimental on a job site.
I. Love your style ware. Good job man 🧍♂️ thank you
I can buy 9-10 tape measures for the price of this one. When 1 of my tapes will outlast this one, atleast the feature we bought it for
This looks like a 60-80 tool they jacking their clients with 2 hundred some
It's cool but there are two problems
1. A normal tape measure is still faster
2. It's not actually necessarily more accurate; if you measure 20cm with the same measuring tape, it will be even.
It might however be useful for smaller scale and/or hard-to-get places, if you can make the band motorised (so that it goes in and out on it's own, possibly even calibrated to stop when it hits something) also probably more useful for imperial, because those numbers are way out of wack haha. For metric you rarely need more than meters/centimeters/millimeters and all of that fits neatly on a measuring tape.
might be useful if it could transmit data to a CAD program.
man do i wish we used the metric system
I hated it at first, but its growing on me. This video may have sealed the deal.
43,000 INR? nah I'll use my hand instead
Really cool tool for a really complicated measuring system
Guys at the job site would die laughing at you too
Can wait to buy amazons for 100$
How Mach pir ?
If your building a spaceship but in the building game just use a normal tape and if you loose it or it's pinched it's replaceable
We love our 957mm wide opening!
By the way why is your base track all broken, how are you supposed to screw board to that? Also why do you have your self drillers sticking out of your door jamb?
As former light-gauge engineer I'm pretending not to see!
Now you can use metric for real precision
How to get your equipment stolen.
1. Buy expensive equipment
Fractions with a lazer 😂
Imagine 5/8 of a mm
That’s freaking awesome. Where can I get one?
Judda zor ijotda davom etinglar
How is that faster than taping the door normally?😂
Can you explain how does it work and is it 100% accurate ?
I believe that you can setup to the metric system. But this toy will cost a month salary here in Brazil.
Those aluminum wall frames n concrete floors r giving me ptsd😵💫😭😂
This is right on par with digital calipers in terms of unnecessary digitization of analog equipment. If you can't read a tape measure, you shouldn't be using one. If you need a laser to tell you where you're measuring from, you're holding the tape too far from the thing you're measuring
Honey, I'm going to the store. I'll be right back. 😊
Back in my day you’d have to hold down the tape and READ THE MEASUREMENT
Now tilt it 15 degrees to the left and line up the green line, the measurement will be different.
Unless you are measuring the laser across a true 90degrees and measuring as close as you can to the reference point, then the measurement is not going to be as accurate.
Point being you need to measure flat to flat, not corner to corner.
With $250, I can get an extra eye with a person attached to it.
Imagine this thing’s battery dies.
Then it’s just a chunky, unhandy, heavier and also noisy tool that takes way too much space and is way to expensive for what it’s supposed to do: MEASURING 😂
I gotta get me one of these
Im sure we'll see these pop up in high dollar construxtion sites and theyll gradually become cheap enough until its basically the standard lol
Seems he's been using that a lot with how crooked the door frame is.
Ilike that tape measure
Is it hard for you to use a regular measuring tape?
Metric system like: 👀
Dont come to site if your tape measure has more buttons than a standard calculator
That right there will make doing sheet rock the best thing in the world, but I had a crew. Oh my gosh would have them. They have a back up one if their first one broke.
Why do you have a mark at 2 cm?💀
Can't even buy this piece of junk, so why do I keep getting ads for fake tools
Cuz RUclips's algorithm is terrible, Tiktok's is way better
I want one.
I work construction all my lives.I think I'll just stick to my Stanley.Tape measure piece paper in a pencil makes life simpler
This would have paid for itself. Talm bout doing my own wood floors. How many packs I fkin wasted.
for people who don't even like simple math
Prise and address
The proof is in the cutting .
Pull that out on the job site and 2 things will happen.
1. it will be gone by lunch
2. you will be made fun of for at least a month
I dont NEED it... but I want one.
37 11/16 makes total sense. Why would anyone use metric system instead of this great imperial measuring system...
I broke it just watchin this video...
Temu $20
Do you have a Millimeter version for normal humans?
Do you make engineer scale?
Oh no, my tape messier
That just confused the sht outta me 🧐🤨
in the full sun shine this laser will be invisible
Wow guess everyone should throw away their laser levels bc they won’t work in the sun lol
This a ruler for those who don't know arithmetic. You're paying for that extra "feature."
Wäre mit einem normalen Maßband nicht gegangen 😂
Bapakku dibeli'in beginian pasti seneng nih 😂
See I’m only 5’11” cause it took off the first inch
Now try meters and centimeters. It will blow your mind.
Very nice 💯👍🏿🇧🇩🇧🇩🫅🏿
Can i find this in France ?
Wow! this is interested,
how can I have it
Most beautiful digital tape invention
Woooww amazing... I have order now
Me - plastic scales are enough for me 💀
Now do that in direct sunlight
I'll stick with my 8 dollar analog tape
basically a tape measurer with a tare tool
Please tell me you can set it to metric
Why don't you use regular numbers though? 11 16ths is a weird distance
Show up with this and be laughed off site 🤣
That’s cool asf
To be fair. Id also need that if i had to use stupid units like that
This new generation can’t even use regular tape measures
11/16ths is crazy
Why
Comment from Russia: is it comfortable to work using imperial measurement system?
What does mean about 11/16? I don't understand at all, there is no math lesson like that at my class 🤣🤣🤣
That's cool until yhe batteries die and your in the middle of nowhere.
Get rid of the digital read out and this would be a skilled trades persons favorite tool, at 1/10th of the cost.
Getting my doctrite in construction..
Bro folding rule...
ak ơi thước này bao nhiêu ha ak