@@InstinctsFN The only tools I used was a hammer and chisel to knock the old bushing out, and a wire wheel on a drill to clean up the hole the mount goes in.... I froze the new mount for a few days before doing the change.. greased it…. literally almost slid into place... A couple gentle taps from the hammer and it was in. If the old bushing is difficult to remove heat it with a torch and it will slide right out
Is this tool compatible to do an e46 t bushing? I did mine with some home hacks and it was a pain in the butt. Would have been great to have this.
But what are the symptoms that that is what needs replaced ?
Is it a good idea to lube the tool before use?
Yes, we recommend using some lubrication on the threads of the tool before using it
You can easily perform this repair without buying that $270 tool
How so gonna do mine soon but don’t want to spend the money on the tool lmk
@@InstinctsFN The only tools I used was a hammer and chisel to knock the old bushing out, and a wire wheel on a drill to clean up the hole the mount goes in.... I froze the new mount for a few days before doing the change.. greased it…. literally almost slid into place... A couple gentle taps from the hammer and it was in. If the old bushing is difficult to remove heat it with a torch and it will slide right out
slightly bothers me that you didnt grab a ratcheting wrench after
I purchased one of these it said it will work on my E60 bmw and it did not work at all