B200 error-Canon printers (Canon ip7250)
HTML-код
- Опубликовано: 7 сен 2024
- B200 error-Canon printers (Canon ip7250)
This video will show you how to try to fix the B200 error on the Canon ip7250 printer.
This error code is also known on other Canon models, and by searching the internet, you will find several types of tips to solve the problem.
The printer with this error is unable to print the assigned document, and before he showing the window with the error B200, it can be heard quite long the work of its mechanics.
The error message indicates that the printer need to go to a service, but maybe not because you probably can fix it yourself.
-------------------------------------------
U ovom videu će biti pokazano kako pokušati riješiti grešku B200 na Canon printeru ip7250.
Taj kod greške se pokazuje i na drugim Canon modelima, a pretragom interneta naći ćete više vrsta savjeta kako riješiti problem.
Printer kod ove greške nije u stanju isprintati zadani dokument, a prije nego pokaže prozor sa greškom B200 dosta dugo se čuje rad njegove mehanike.
Poruka o grešci upućuje da printer odnesete u servis na popravak, ali možda ipak ne trebate jer stvar moguće možete riješiti sami.
#B200 #Canon_error_B200 #ip7250
This has done the Job !!
I left the print head dry overnight and cleaned all the contacts, this for me was an important step.
Thanks for posting this video !
Funcionando de nuevo, lo único que he añadido a tu tutorial es, después de lavarlo una buena pasada con el secador de pelo y después un algodón con un poquito de alcohol. Muchas gracias compañero por compartir.
Lo haré enseguida. Bendiciones y saludos desde Panamá.
Perfect! After washing and letting the printer head to dry overnight, the error kept pooping up when trying to print. I had to perform a couple of cleaning procedures and then it went on printing again. Thank you for the tip!
It worked for me too! Thanks so much. Hate having to throw away things like this. One thing I'd suggest is letting the print head dry for a day before reinserting it, rather than letting it dry in the printer. Also, try putting something over the cartridge outputs to prevent them drying out while you're waiting.
Dear Vedran
Greetings from London!
Thank you so much for this video.
Amazingly it worked!
I would never have allowed myself to run a print head under hot running water and believed it could work.
However we gave it a try and after eventually getting rid of the error message gave it 6 nozzle deep cleans before it came out clear.
And it works like magic now!
Well done on your green initiative to keep equipment running for as long as possible - green repair
If ever you are visiting London send me an email! I owe you a drink!
Warm regards
Charlie H
I'm glad that helped. Thanks for very kind words.🙂
But keep in mind that's temporary solution for some time.😉
Thanks this is my second printer with this fault, just over a year old, copied your advice and its now working fine.
thank you so much for your support. the printer worked after 3 hours and made a perfect test page right away. greetings from the heart of bavaria, germany. warm regards
Bravo! Oprao glavu printera, istresao ostatke vode iz unutrašnjosti i posušio fenom. Vratio glavu, boje i uključio printer. Softverski napravio duboko čišćenje i sada se greška ne pojavljuje i printa uredno.
Brilliant - take your time, follow the instructions. It worked for me first time.
It worked for me! I thought it didn't work but the waiting part is important! I waited for an hour while it is switched off and after that it worked
Thanks a lot. This video helped me a lot and it allowed me to solve the problem. My printer works again and saved me an unnecessary purchase and polluting the planet for nothing
I followed your instructions step by step and I was a complete success. Thank you very much. You saved me a lot of money. May you always be well. Dimitris from Athens
Glad it helped!👍😀
zahvaljujem na videu. tocno kak si rekao dok ne odstoji par sati ima gresku i onda dalje funkcionira.
Thank you. It sorted my Pixma iP7250. Great step by step
It's scarying but it's works.
Great job friend.
Thanks a lot
Спасибо большое! Ничего не понимая по английски, сделал всё, как на видео! Всё получилось! Сколько грязи вышло с промывкой! Canon 7250 снова в работе! Это, пиздец, как сита были "засраны", три ведра под напором струи:))) ушли... а грязь вымывалась и вымывалась. Я, использую не оригинальные чернила, но принтер стоит иногда месяцами без работы. Засох! Как был я рад, когда он заработал снова! Сначала я подумал, что надо применить и искать "утилиту", которая обнуляет работу на принтерах Epson, но мой Canon 7250 не был в долгой работе, случайно вышел на решение проблемы здесь! Support Code B200. Спасибо автору урока! Успеха в решении проблем владельцам подобной модели принтера!
Ну, это здорово! Я рад, что это сработало.🙂
THANK YOU SO MUCH! Its work for me after 1,5day drying!
amazing i was going to throw my canon ip7250 ... now it works .. thanck you very much from italy
Great!👍🙂
Simple!....Well done for making this simple video. Hats Off to you sir!
EXCELLENT tutorial...Clear and concise...Thank you.
Thanks very much. I had tried to clean printheads on an HP printer but as I thought it did not work. I was skeptical but tried it. Put the washed print heads back in and the ink cartridges and let it sit for about 2 hours and it started up and printed. Not sure how long my iP7220 will continued, has been in use for 7 years and over 4000 pages printed.
Was so usefull! Thank you for the tips... And works for my iP7210....
Had this exact same issue and this solution worked for me. I tried printing straight after cleaning the printer head and got same error, I had to leave it 2-3 hours after I cleaned the printer head and worked fine after.
Thank you so much for the tips!
Thanks was able to repair my printer
Great!
Thank you😀
Thank You
Yep! Worked perfectly for me. Thanks.
It work for me as well, thanks!
Grazie mille utilissimo. Mi hai riparato praticamente la stampante
Glad it helped!👍😀
It worked for a second time!
It works. Thanke you. 😊
It’s work for me too thank you so much to save my time and money👍🏻👍🏻
Thank you! It perfectly worked for me! :D
Very good and well documented. Must be followed exactly as described and it will absolutely work. It saved my printer and my wallet. Thanks a lot !
Dziękuję za bardzo pomocny filmik. Moja drukarka ruszyła po wykonaniu tych czynności. SUPER!!!
Aaand it really works! Thanks!
hvala
Thank you !Excellent advice !
If you press the cancel button 5s the head should move to a position where you can remove the head.
Worked for me, thank you so much.
funciono perfecto, hice el proceso de limpieza y volvi a instalar todo. y seguia apareciendo el error. saque nuevamente los cartuchos y puse solo los negros. inicie la impresora y luego de eso instale color. y la impresora sin errores muchas gracias. esta impresora me gusta por que los papeles se cargan en las bandejas inferiores y no puedo encontrar una similar..
Muchas gracias!!!! Funciona perfectamente.
It works :) Thanx :)
Hallo, The ink carriage in the printer is not instructed for the ink cartridges in the Canon ip7250 . printer
Until he worked ok I always was buying original cartridges. After problem show up I bought compatible replacement because I don't have money to waste. Anyhow this temporary solution isn't permanent because printer head is dying whatever You doing. Buying new printer is the next step after this.
After 3 hours dring outside on a sunny day it still shows error so I'm letting it dry some more. How do you run a cleaning utility if the error messages keep popping up?
You can't. I think there's no help in this case.
Thank you so much it real worked
hello, after cleaning the printhead the printer still displays the message "the printer needs to be repaired"
what do you recommend?
Probably nothing. This procedure works maybe 2 or 3 times on dying printerhead as a temporary measure. New head cost almost as a new printer.
Thank you. Problem solved
On my ip7250, it will not switch on, there is no power and the left hand grey light will not illuminate. I have changed the power input cable and it is fine, ANY help and advice, would be greatly appreciated...Thank you..Gonzo.
So with new power cable printer work as I understand what You wrote(?)
Thanks for help
Bravo!
It works!! Bravo!
Thank you ! 😎
THANKS!!!!!
Please my printer is ip 7240 is showing that same eroor can I use the same way too?
I think yes...practically same mechanism.
I tried it. But it Didn't work. But I have the ultimate solution for B200. 90% work as far as the glass sensor under your printer isnt broken. You are good to go with my by pass solution for canon Ip7240,Ip7250.
Muchas gracias, se soluciono
GREAT IT WORKS!
My canon printer head as stive and unable pull out, how can I get to remove it
Don't work. I cannot remove and bring the cartridges to the middle manually from the side where they are parked. They are locked in the side where they are parked. AND one more thing,....the printer doesn't turn on anymore,..it doesn't get power anymore or it entered some kind of short-circuit protection,...how can I solve it?
Did You unplug the power cord and usb cable before manually moving print head to the middle(?) If yes then I think that is some mechanical issue.
This not solv my error how yo reset the light? I know there option to press several times together button 🔘 any can help
What the. New. Model like that printer that use same. Ink?
Kiedyś zadziałało, a dzisiaj już nie 😞
My cartridge tray/lever (or whatever it is called) is stuck in a locked forward position and I cannot push it back, i have tried a dozen times. First, when I pushed the printer head back, it got stuck in a slanted position, and I couldn't get it out. I then removed the screws, one on each side of the cartridge tray and was very forceful to get it out, forceful towards the tray as well, as I got frustrated not being able to get it out for a long time. Hopefully I haven't broken anything. Now, I can't put the screws back on, as I don't have the magnetic screwdrivers, the size and shape of the few screwdrivers I have are not ideal, either. I tried putting them back, but looks like the distance is too long to screw them on, and they have fell multiple times into the inside of the printer and I had to shake them out :( Can I do anything to push the tray back? Everything is closed due to coronavirus and I need a printer. :(
Hm, I think by your description that you made some mechanical damage on mechanism(?) If you check on 7:43 you will notice that I didn't pull back ink cartridge on original position. I just close the tray and printer made all procedure after alone.
didn't work for me =(
Preciso de ajuda, tenho a canon ip7250 e estava a imprimir quando deu um erro 1410 onde diz que o tinteiro não é reconhecido, já troquei o tinteiro e nada. Fica a piscar uma luz laranja no botão do meio onde tem a folha desenhada. O que posso fazer para resolver o problema? Não me deixa imprimir nada. Obrigado
If you don't use original/genuine Canon cartridges that can be a problem(?)
Also can be a problem dirty or damaged printhead, especially pin connectors for specific cartridge.
www.justanswer.co.uk/printers/9rhid-keep-getting-code-1410-warning-cyan-ink-tank.html
I had to leave the power on, otherwise I could not move the printer head block
Hello to everyone! I have an issue with this printer. When I plug it to a power source the orange light comes on and it stays on for all the time. If I press the power button it lights up but the printer appears to be death. I cant install the drivers and cant turn it off. Can someone give me a hint on this regard? Thanks!
Fatto e insieme ad un'altra procedura di apertura sportella e chiusura all'avvio, ha permesso di riprendere a funzionare. Proverò a stampare su carta fotografica per verifica finale. Ho utilizzato prima del detergente per vetri, poi sotto acqua corrente ed infine con aria compressa ho terminato la pulizia e asciugatura. Grazie
A mí no se me arreglo 😢
Ma canon refonctionne.Merci.
Perso j'ai séché la tête avec de l'air comprimé et une soufflette. On gagne le temps de séchage.
Not work!!!
I clean the printer head with hot water and cover it with a paper towel its on the radiator. Now wait and see after 6 hours.
It failed patern test because u rinsed it with water. It needs inkjet solution 100ml , you can buy in ebay, water or alchool damages pixels of nozle.
Vedrane i moj printer ima taj B200 error svako toliko. u ponedeljak cu pokusati oprati glavicu pa da vidim dali ce ici, a ako ne na Amazon isti kupiti jer imam masu tinte a kod nas je tinta za njega 5 komada 9,95 ili kad imaju akciju 7,95 eura.
Vera pogledajte moj odgovor Bass Man-u, pa vam bude pomoglo vjerovatno.
I followed all the explanations of the video but this doesn't help to solve the error B200...
Probably printer head is in beyond repair status. So new head or better (cheaper) new printer is option.
@@fire2hr :-(
Radi li jos uvijek printer? :-) Ja sam upravo zavrsio ovu proceduru i cekam da se osusi pa da isprobam hoce li raditi.
Hm, radio je neko vrijeme ok...i ko za vraga nekidan idem nešto printati i opet bacio taj B200 error.😔
Sada imam u planu ponoviti ovu proceduru, pa ako ništa ne uspije vjerovatno moram razmišljati o drugom printeru.
Evo baš sam danas ponovo oprao glavu, ali puno detaljnije i sada opet printa ok.😀
Dokle će tako ostati budemo vidjeli, ali sada sam glavu dosta dugo prao mlazom mlake (na trenutke i vruće vode) sve dok je i najmanji trag tinte bio vidljiv. Nakon toga sam još nakapao alkohola u samu glavu i ona mjesta gdje sjedaju tinte...tu je pak opet određena količina tinte izašla te opet sve ispirao u vodi. Glavu sam lagao obrisao i sve sklopio natrag te ostavio nekih sat vremena da ishlapi vlaga koje je sigurno ostalo.
@@fire2hr Nazalost, moj printer nije proradio nakon ovog "tretmana" pa sam kupio novi. U svakom slucaju, hvala na trudu ulozenom u postavljanje ovog tutoriala. Vrijedilo je barem probati :-)
@@fortissimoX Šteta...mada nisam siguran da će i ovo moje biti ok na dulje staze.
Ciao, provato la stessa cosa... Non è servito a nulla. Continua a presentarsi lo stesso errore...
Then probably your print head is beyond repairing on this way.
Are you saying that just by washing the printer's print head with water, you stopped making a mistake? Why are you cheating? There are special tools for this,
How I'm cheating when procedure works ok as you see through comments? Anyhow there's no special tool for dying printhead. Only possibility is to buy new printhead or printer.
Stephen Hawking did a great job with this, tho' it's really beneath him. 😎
This process worked well on an iP7200. Bravo!
after cleaning the head this video helped mine - ip7250 : ruclips.net/video/keDjpGBlrOc/видео.html
thank you
it didn't help me :(
Sorry...
Sadly didn't work for me - thanks anyway :-/
Your printhead is obviously in beyond repair state. Mine printer from this video is no longer in service. This cleaning method work twice but after some 6 months third time didn't work. This whole procedure is some kind of temporary solution.
Thanks a lot.