Always love seeing older coin op related stuff, luckily i still got a few MVS carts and a couple of single slot boards. Playing these older systems on CRT is still a great experience. Nice.😎👍
Yup. Drifting focus/brightness is the most common issue on the Neotec monitors. Affects all of them. However, don't replace the flyback if it's working fine. Only replace it if the focus/brightness is drifting. Just mentioning that for those that might think it needs to be replaced just for the sake of replacing them. Thanks for the shoutout. Nice work fixing it up. Those legs are in fact ground pins and need to be connected. The flyback will not function and can be damaged if they are not installed/overlooked. Removing the resistor alone prevents the board from charging the Lithium battery on the MVS board? Seems like you'd need to install another diode like with most applications when replacing a rechargeable battery with a Lithium battery. No?
Thanks! I honestly didn’t study the schematics myself, but all the tutorial sites and videos I saw said that all you need to do is remove that resistor to disable the battery recharge circuit on this particular MVS board.
Better late than never. I really appreciate that you got this one out. And I appreciate that you went through the process of using a new router. Thank you.
Discharging the monitor always makes my heart race, waiting for that "pop". I'm all about preserving the original monitors if at all possible. The LCDs don't do the golden era games any justice Great tutorial, sir!
It was a whole ordeal… LOL Even after I finished filming, it took me an entire day to edit 48 separately clips and 3+ hours of raw footage into a semi-coherent episode. And then iMovie couldn’t handle exporting it all at once, so I had to chop it up into 5 separate parts, render them individually, and then stitch the whole thing back together before uploading. I need a production team! LOL
There is a reversal happening. 20 years ago, people wanted cabinet arcade games for the nostalgia in their home. The industry become overloaded with options...now its novelty has worn off. May take another 30 years for the yearning to return.
Depends on how you define the hobby/industry. If you only care about original coin-op machines, it’s not like they’re making any more of those. But if you’re into “home arcades” with modern hardware, LCD monitors, and cabinets you assemble like IKEA furniture, then I agree that the market for that stuff has become over saturated. Also, nostalgia is a powerful force here… 30 years from now, most of the people who remember playing these games back in the day will be in a nursing home! 😅
I’ve got WWF SuperStars and would like to get a WWF WrestleFest PCB too. While I’ll admit that WrestleFest arguably has better gameplay, SuperStars definitely has a better roster. OOH YEAH!!!
Excellent video 😊 can you explain the battery replacement, on most machinces you place a diode inline of the battery, so it can't charge but gives 3v to memory when off.
Yes, Mike Jensen said something similar. I just followed the tutorial pages & videos made by actual Neo Geo experts, who said to just cut the resistor. For example: ruclips.net/video/6XTjhMRYBrE/видео.html
@@overtimearcade Without seeing the circuit diagram, but, going by the image on that video, it looks like the diode is already there and the resistor, which you removed, feeds the battery with the charge. 👍
@@overtimearcade I have just looked at the circuit diagram and yes, the diode is already there and is facing the correct way. The resistor is part of the charging circuit 😁
@@overtimearcadeIt stops the battery from being charged. It doesn't disable charging circuit, just disconnect it from the battery. The diode is to stop back charge and let it power the ram when the power is off👍
Anyone know where I can get a good power supply for an MK4 cab? Very very new to this. So I'm trying to figure out where I can source parts from. Appreciate any help I can get.
Is it a dedicated cab or a conversion? It probably uses either a standard switching power supply or an ATX-style power supply (similar to what a computer uses). What’s in there now, and are you sure it’s dead? Depending on which model you need, you should be able to find a replacement from vendors like arcadepartsandrepair.com or arcadeshop.com
I probably have at least 40 projects that I need to work on. But it seems like every time I fix a game I get 3 more projects😅 also I have been more into pinball machines which take even longer to fix them
Always love seeing older coin op related stuff, luckily i still got a few MVS carts and a couple of single slot boards. Playing these older systems on CRT is still a great experience. Nice.😎👍
Ain't nothing like a CRT!
Yup. Drifting focus/brightness is the most common issue on the Neotec monitors. Affects all of them. However, don't replace the flyback if it's working fine. Only replace it if the focus/brightness is drifting. Just mentioning that for those that might think it needs to be replaced just for the sake of replacing them. Thanks for the shoutout. Nice work fixing it up. Those legs are in fact ground pins and need to be connected. The flyback will not function and can be damaged if they are not installed/overlooked.
Removing the resistor alone prevents the board from charging the Lithium battery on the MVS board? Seems like you'd need to install another diode like with most applications when replacing a rechargeable battery with a Lithium battery. No?
Thanks! I honestly didn’t study the schematics myself, but all the tutorial sites and videos I saw said that all you need to do is remove that resistor to disable the battery recharge circuit on this particular MVS board.
Interesting
Better late than never. I really appreciate that you got this one out. And I appreciate that you went through the process of using a new router. Thank you.
Thanks for watching and for your patience! I do actually enjoy using this router quite a bit! I’ve never actually used one before.
Discharging the monitor always makes my heart race, waiting for that "pop". I'm all about preserving the original monitors if at all possible. The LCDs don't do the golden era games any justice Great tutorial, sir!
Thanks! I’m actually working on a couple of K7000s tonight!
Thanks for getting the video out Charlie!
It was a whole ordeal… LOL
Even after I finished filming, it took me an entire day to edit 48 separately clips and 3+ hours of raw footage into a semi-coherent episode. And then iMovie couldn’t handle exporting it all at once, so I had to chop it up into 5 separate parts, render them individually, and then stitch the whole thing back together before uploading.
I need a production team! LOL
There is a reversal happening. 20 years ago, people wanted cabinet arcade games for the nostalgia in their home. The industry become overloaded with options...now its novelty has worn off. May take another 30 years for the yearning to return.
Depends on how you define the hobby/industry. If you only care about original coin-op machines, it’s not like they’re making any more of those. But if you’re into “home arcades” with modern hardware, LCD monitors, and cabinets you assemble like IKEA furniture, then I agree that the market for that stuff has become over saturated. Also, nostalgia is a powerful force here… 30 years from now, most of the people who remember playing these games back in the day will be in a nursing home! 😅
All i want is wwf Wrestlefest
I’ve got WWF SuperStars and would like to get a WWF WrestleFest PCB too. While I’ll admit that WrestleFest arguably has better gameplay, SuperStars definitely has a better roster. OOH YEAH!!!
Excellent video 😊 can you explain the battery replacement, on most machinces you place a diode inline of the battery, so it can't charge but gives 3v to memory when off.
Yes, Mike Jensen said something similar. I just followed the tutorial pages & videos made by actual Neo Geo experts, who said to just cut the resistor. For example: ruclips.net/video/6XTjhMRYBrE/видео.html
@@overtimearcade Without seeing the circuit diagram, but, going by the image on that video, it looks like the diode is already there and the resistor, which you removed, feeds the battery with the charge. 👍
@@overtimearcade I have just looked at the circuit diagram and yes, the diode is already there and is facing the correct way. The resistor is part of the charging circuit 😁
Right, so removing the resistor (like I did) disables the charging circuit?
@@overtimearcadeIt stops the battery from being charged. It doesn't disable charging circuit, just disconnect it from the battery. The diode is to stop back charge and let it power the ram when the power is off👍
Man I feel your pain on that vinyl. I hate working with vinyl
This vinyl in particular is very forgiving though... except on my wallet!
i praise the lucky fool that gets those machines
His name is Mark. 😂
@@overtimearcade kudos to the dude
@tsitracommunications2884 He paid… dearly! 😈
@@overtimearcade ?
You’ll see…
Definitely worth the wait. I bet the extra space will be great for the next week or two 😂
Too late. I already bought 10 more!
35:50 _oh my pkcell_
I’m sorry to say, I had to look that one up… but I wasn’t disappointed!
@@overtimearcade And they're not included, thanks boys. :D
Also, I miss John's Arcade :(
We ALL miss John’s Arcade!!
There is always emulators and a slew of really nice control boards you can use with a PC.
Not for me, I’m just making room for 10 more games that I picked up. 😂
My compliments to the chef… 👨🍳 Sweat appreciated 😅
If I win the lottery, I’m paying off my mortgage and installing A/C in the garage. 😂
Anyone know where I can get a good power supply for an MK4 cab? Very very new to this. So I'm trying to figure out where I can source parts from. Appreciate any help I can get.
Is it a dedicated cab or a conversion? It probably uses either a standard switching power supply or an ATX-style power supply (similar to what a computer uses). What’s in there now, and are you sure it’s dead? Depending on which model you need, you should be able to find a replacement from vendors like arcadepartsandrepair.com or arcadeshop.com
Peter & APAR Is great!
He's the Goat! THE GOAT!!!
Maybe you should get rid of the people saying you have to many products 😅😅😅😮
I know, right? Don’t these people want me to be happy?? 😅
@@overtimearcade exactly 😆
I'll take them. How much can you offer?
Offering or asking? 😅
@@overtimearcade offer
You want me to pay you? hahaha
I'll buy that Class of 81 if it's still available.
Have your people call my people (email in About tab). 😎
I probably have at least 40 projects that I need to work on. But it seems like every time I fix a game I get 3 more projects😅 also I have been more into pinball machines which take even longer to fix them
You’re my people! I picked up 7 cabinets in the month of June alone, and have 3 more waiting at friend’s houses waiting for me to pick them up!
They could be sold to an new owner soon?
That’s the plan, at least for the Sly Spy, Superman, and Class of ‘81 cabinets!
Oh...nice shirt! 🙂
It’s the season’s hottest new fashion item!
Don’t forget future spy has left overtime to a new home 😎also. Thanks so much!!!!
Yessir! Literally dozens of viewers will be disappointed that I’ll never finish that restoration! 😂
@@overtimearcade I’ll carry the torch and send pics when I’m finished
I hope I get a chance to visit and play that Future Spy someday!