Troubleshooting PC No POST | Computers and Coffee
HTML-код
- Опубликовано: 4 авг 2024
- Does your Gaming PC turn on but no display? Or perhaps your PC doesn't turn on whatsoever? Here are some troubleshooting steps you can do to figure out the problem.
Still not finding answers? Take a look at our other videos or FAQ page:
No Power: • "My Computer Will Not ...
FAQ: www.ibuypower.com/support/faq
Follow us on TWITTER! - / ibuypower
Follow us on INSTAGRAM! - / ibuypowerpc
Follow us on FACEBOOK! - / ibuypowerpc
Subscribe for new releases, esport events, promotions, and more! 
Наука
Just wanted to say thank you so much for this video. This is my first foray into a desktop PC and ran into issues with the boot but this video helped clear the issues and now I'm finally able to enjoy the PC I just spent a whole bunch of money on. Thank you for not only saving me from scalpers, IBP, but also for awesome support videos like this!
I just decided to put together my own video on building a computer, but quickly realized I am not the best guide, especially for as complex a topic as troubleshooting. So I went looking for a video to put in the description for further troubleshooting tips.
Can I just say these videos are super well done? Like above and beyond what I was expecting to find for a mid sized channel?
Take my like, you've earned it.
Dude thanks so much for this video, I wish every single computer trouble shooting video was this flushed out. Going through this troubleshooting over the phone would have been a nightmare for someone like me, who barely knows anything about computers. Thanks again!
Thanks boss! I’m terrified of opening up computers but I swallowed the pill and got my pc working again! No money needed!
New builder here and was freaking out because my computer wasn’t posting. I removed RAM and placed one back to try it and it worked. Thank you so much!
Wish I was that lucky still haven't figured it out
@@darthjarjar2742 same, taking mine to repair shop see if they can find out. Reckon it's the PSU or motherboard but hopefully get it fixed 😣
@@SCOHunter you had any luck, my pc is freshly built today and my mouse and keyboard receive 0 power and neither do my front fans or graphics card, please help
Your video saved me! First build, and just had to pop the CMOS out for a few and reseat graphics. 🥳
how do you pop the cmos?
you mean the battery?
Here I am hoping this will help me with my new build :S
Same, this vid is a lifesaver. 😭👍💯
@Twomad ? did it work bro
Well hello fellow overclockers that may have went too far.
Fuck me dude I tried to oc my ram to 4000mhz
@@jasonliu1911 LMAOOOOO
@@riowydd stop
@@jasonliu1911 at least I only tried 2300 when my ram maxes at 2133 JESUS
@@SirSpirodang u tried to oc old ram
Messed with the RAM sticks and got it to post! Thank you guys so much
Wdym?
@@svartyc Turned the PC off, removed one RAM stick, turned the PC on. Do the same with the other RAM stick. If nothing happens, swap their positions and hopefully it should post
I really appreciate it. Followed your steps and my PC turned on and communicated with my display. Now backing up my PC incase it's unfixable next time.
FOR NEW BUYER WITH NO DISPLAY. I just got mine to work following this guide, but with some added self diagnosis. My model was one with an rtx 3070 in it. The card wasn't fully seated because there wasn't enough physical space on the motherboard to have the giant of a GPU not run into one of the cables underneath it (is it called a SATA cable? Anyway...). I had to flex the cable connection down while being sure to not bump into the release tab of one of the rams when I reseated the graphics card. It...barely...fit and seated deeper than before. Not too happy with how flexed that cable mount on the mobo had to be, but there it is. It helps having a mechanical background I guess. :)
So, I decided to pull the gpu out and switch the ssd with the os on it to the lowest possible sata port and remove the other hard drive all together. Guess im going external with that hard drive now. :/
🙌 thanks for leaving this comment here! I bought my pc a while back and hadn't have time to sit down and set it up and now I finally have time it won't display (at first thought was the monitor/ cable) but after plugging the monitor to display a mac it had no issues) kind of quietly freaking out that it's my brand new pc!!??!! will be following these guides!
Thank you. I'm going to have to try these techniques tomorrow.
Re-seating the RAM worked for me on my ibuypower Trace MR BB970. Thanks guys.
For anyone panicking, check your ram stick on both sides, make sure they're pushed in equally
A pc keep giving alarming beeps or siren but still work fine. Usually first thing to do is to replace the PC case and install the RAM in different slots, but some RAM stick are the “leader” stick that must be in the slot 1 to make a pc POST as the other sticks of RAM “follower” sticks that couldn’t POST all by itself.
It may not be the PSU has fault, but replace the PSU may fix it if all the fans works fine when there was no POST. Replace mobo’s battery too. In many cases no PC parts has fault, it just need to replace the PC case, RAM, PSU, battery with another working PC parts, so after doing all that, you ended up with 2 working PC system and not a single faulty PC part.
May need to replace the PC case because some pc case’s back panel is curved outward and need pushed inward to put in the screw to secure the graphic card, so after some years or weeks of use, it pulled things out of place, bow and arrow theory … …
The ram reset did the trick for me thanks. idk if my ram was loose or if no post was due to using CCleaner pc Heath check/fix.
Helped me fix my problem! Thank you so much seriously !!
This helped so much thank you for this video👍
great vid man keep it up
thank you for this wonderful video, just needed to reseat my RAM 🙂 badly need my PC for online classes, thanks again ♥️
Thanks for the video help I really need my PC for school and you saved it
Thank you, thank you, oh, and THANK YOU! I have never, not one time, regretted purchasing from ibuypower. The customer service and tech support is second to none.
Question? Could the cable extensions from the psu cause a bad connect to the mobo and prevent post
THANKYOU!! I just spent 1800 on a behemoth of a system just for it to stop turning on
Literally the first thing you tried was it. Damn thing was loose. Thankyou for saving me potentially visits to a pc technician
same here, spent 2k on a new pc for it to not connecting to a monitor first try :/
For the first time ever a video worked without any problems
I reseated the RAM, Graphics Card, CPU power connecter.
Took out the CMOS battery for 5 mins
Slapped it back in and it worked.
Thank you, liked and subscribed with the bell on
Thank you for this helpful step-by-step video. I just bought a PC from you folks and while it would eventually load the BIOS, then subsequently Windows, would take about 2+ minutes of black just to get to the BIOS splash screen. Which I was like, "That can't be right." Tried reseating the RAM, Video Card, and motherboard battery, and it's now getting through POST to the BIOS within a normal time frame as expected. Thank you!
I rarely like videos, but you saved me
FYI. For anyone watching this video... IT REALLY PAYS TO WATCH IT IN IT'S ENTIREITY. I tried removing the graphics card. Tried removing my RAM sticks. It wasn't until the VERY LAST suggestion that it worked and regardless how insignificant it might be, it's worth trying. The only thing that worked was me removing the CMOS battery for 5-10ish minutes and then putting it back in. Trust me, this works. I was going to go to my neighborhood Microcenter and probably buy and get installed a brand new motherboard which is what I thought was wrong. This saved me a chunk of change.
Thank you!
ur not lying i tried everything else and the final thing worked
Thanks!
Legit saved me so much time. Cant thank you enough
Thank you so much!!
Thank you my ram was seated incorrectly and u saved my pc thank you
Thanks for your tech guide, removing the battery was the solution to fix my pc.
wow, thank you very much brouuu
I spent 5 hours trying to figure out why my ram wasn't working and all i had to do was push on both sides instead of forcing 1 side. Feel stupid 😂 Thank you for clarifying that for me
Thanks to this, I was able to discover my motherboard has a bad ram slot. Just moved my ram to 2 and 4 and now it works.
you are supposed to put them into 2 and 4
@@user-tr2dh4xx6u My MB has priority on 1 and 3. 2 and 4 are basically slaves when there's 4 RAM inserted.
Thanks a lot!
Thanks so much man
OMFG THANK YOU SO MUCH
Thank you big man
If you aren’t seeing any lights on the board try changing the monitor. This is the second time I’ve fixed a no post by changing monitors. You can switch back later.
It can be a DVI to sub adapter cable issue, it could work for a day or 2, but then it no longer worked for unknown reasons, so better idea is test it on another screen that use HDMI or direct d-sub cable.
Can you post a link to your advanced troubleshooting 201: Advanced Power and POST issues? For those of us that are still not POSTing after following these directions from the basic guide.
Have you found any solutions?
Thankyou so much, i was cleaning the dust of my pc and i think i touched the ram, a removed and reattach the ram and it works....
Same
Thanks mate
Thank you 😊
How do I know if my ram stick is in the right way? I did all these steps with the element mini and still doesn’t show. This time I took them all out to see if it’ll work
Is this common on your brand new pre-built PCs ? I just received mine brand new and it does not work...
@TOERAGw06 Fantastic. Just got mine a day ago and have this issue.
FFS this is the second computer in a row that's done this to me.
Same here! Did you ever get it figured out?
thanks reseating the graphics card saved me!
You all saved me fr
So you see my pc has power so what is happening it won’t display on my monitor and it won’t get signal so what I’m thinking probably a cable is disconnected or something from let it to get signal or it’s something else
Same just got my pc too
How do you plug in the internet sticks ,?
Hello, My name is Bernard and i'm having some issues with my PC and would appreciate your help if possible. I have an AMD FX-4350 CPU that i just swapped to a FX-9370 cpu. I installed the cpu but after installing it i waited a few minutes then went to try turning on the computer but my computer seems to not want to stay on. When i press the power button it turns on for about 5-10 seconds then it turns off automatically. I get no video display either. Is there a reason why its doing that? Its never done that before. This is actually the second time i change a CPU so i'm not sure if i missed something. Your help is very much appreciated.
Thanks
I do t know the graphics card had hdmi ports, that was my issue, thank you so much!
Dude you’re a fuckin idiot😂😂😂
Don't be an ass Aiden. It may be his first time using a computer with discrete graphics. Everyone starts somewhere.
@@Aidan-ff4wd 😂😂😂😂
There's one more simple check you should make if your PC has been in use for several years: If it won't start, or it takes a very long time to POST, or it shuts down again almost immediately, check for a bad power switch. That just happened to me a few weeks ago. When pressed and released, the power button remained stuck in the down position. Read your motherboard's manual to find out how to "jump" (short) the power connectors to start the PC. If that works, you can buy a replacement power switch.
I recently just bought the trace mr pc from you guys and there is a blinking red light on the case I am unsure of what it is or how to fix it please help
My Alienware aurora r7 works great, but sometimes it wont power on, but usually after a while sometimes hour or days its starts back working!?!HOW!?? i took it to 2 pc shops so far trying to fix this problem I replaced the power supply and installed a SSD with fresh OS and HDD, the original power supply had a button to test all fans and they spinned before i swapped it so i know its getting power when it does this not powing on thing im typing this on my pc but i dont wont to shut it down anymore cause of this problem if anybody has any idea, suggestions that help please i dont know what to do?? been trying everything,
My optiplex does this weird thing where when it overheats it will not enter post. It usually comes back to normal but it can vary between a few hours to even weeks. I just wish I knew why it does that and how I can make it work again and how to prevent it.
i have a ibuypower trace 4 pc and my usbs to my keyboard and mouse aren’t working how do i fix this? i’ve been searching and searching and can’t find a diagnose
THANK YOU AO MUCH
Does anyone know if this works if the pc is showing a black screen with flashing line in left top corner when trying to boot windows 10
so i power on, everything lights up and fans spin. My motherboard led lights begin the boot loop. White led(4 seconds), yellow led(4 seconds), then the red led comes on but only for a second then it goes back to white led and being looping in that order. My manual says red light indicates CPU but it’s supposed to stay illuminated if there’s a problem with that hardware. I reseated everything, cleared cmos and redid bios flash, still no signal. My monitor works on my laptop, but it takes a few minutes of being plugged in for the image to show. But it works none the less. any ideas? asus b550f wifi ii and 5800x3d. brand new build so ram isn’t dirty and i tried reseating didn’t work
holy shit i didnt put one of my RAM stick back in all the way... thank you so much!!! if i could like a video more than once i would!!!
I bought a new desktop PC for over 2 thousand dollars from ibuypower. and they gave me a broken pc and told me to watch this video...
I need help someone help me my pc I turn it on everything is good fans led but it says an error at the bottoms 0d and my monitor mouse and keyboard won’t turn on what do you guys think I should do
My friend have this problem and we try to find out which componemt doesnt work with changing our components his pc doesnt work but now mine doesnt work either does anyone know why
Thank you this video saved me I just needed the to let the cmos sit
Hopefully that’s my issue, I’ll have to test it when I get home.
@@lastfirst5863 did that work for you?
@@ikzou2789 it helped me get the old card working again, and figure out what I did wrong with the new card. I plugged in the 8 pin without also plugging in the six pin on my GPU, I was a dumbass.
@@lastfirst5863 owh...im so sad, I just build my pc yesterday and it shows no signal I did almost everything, I feel like crying 😢
@@ikzou2789 What specs?
What's the nice music? Nice to hear something besides dubstep.
How do you use cds?
Okay I'm new to this and I was setting up my pc then it just turn off so I thoght it was went to sleep but when I push the power button it just flicker then wont turn on then after looking inside if any cables was loose, I put back together, then push it and its keeps flickering
My pc won’t boot. I built it yesterday. All the cables are in right I’m pretty sure and then only thing that is turned on is a white light above the pcie connector to my graphics card
for me it only works by clearing the CMOS. the issue tho is that the PC boots but after a couple minutes freezes and the when I turn it off and back on, there is no post again. any help?
For people that bought through CyperpowerPC. Just bought a prebuilt, also lasted about 30 days and the computer would turn on for a few seconds then shut off. Keyboard, mouse and Monitors did not turn on during this. Checked all the above. Turned out to be the round battery under my graphics card on the motherboard. Left it out for 10 minutes, then put it back in and the PC started working. I had initially thought it would be the PSU, but it wasn't! Wanted to post for anyone that might be having a similar problem and to save you from buying a whole new PSU!
i have the same issue, but nothing seems to help
@@meneeya took out the battery for 10 min then put back in or get a new battery that was on the motherboard. Seemed to fix it. Hope this helps.
TYSM saved me :)
I went through these steps and still couldn't get last Post. Just wondering what comes next in advanced troubleshooting? Don't wanna give up on the PC but I think it's a CPU or motherboard issue at this point maybe?
Did you ever figure this out? my call with ibuypower dropped and I need next steps but now they're closed.
One more tip : try and remove any unnecessary peripherals.
My pc wouldn't post bcz it couldn't recognise my usb hub😅
I did all of the steps and my monitor still says no input
Me too! I went to a technician, in his lab the pc worked, but when i came home, it still doesnt :(
Most likely have to get a new motherboard
A pc keep giving alarming beeps or siren but still work fine. Usually first thing to do is to replace the PC case and install the RAM in different slots, but some RAM stick are the “leader” stick that must be in the slot 1 to make a pc POST as the other sticks of RAM “follower” sticks that couldn’t POST all by itself.
It may not be the PSU has fault, but replace the PSU may fix it if all the fans works fine when there was no POST. Replace mobo’s battery too. In many cases no PC parts has fault, it just need to replace the PC case, RAM, PSU, battery with another working PC parts, so after doing all that, you ended up with 2 working PC system and not a single faulty PC part.
May need to replace the PC case because some pc case’s back panel is curved outward and need pushed inward to put in the screw to secure the graphic card, so after some years or weeks of use, it pulled things out of place, bow and arrow theory … …
In one of the other cases, each time the power is out in my house, I need to replace the graphic card and installed a graphic card that could POST in the PC, then I install the one that failed to POST back in place and it could POST, so each time the power it’s out I need to repeat that!
Some PC could shut down due to static charges when your hand is only touching the power button to the PC that’s made of plastic (not pressing the button).
Some PC couldn’t POST, just wait a 3 days without using it, then it return to life of POST, this could happen once in a few years of use, like seeing a comet going passing by! Unplug the power cord and HDMI cables to the PC and let it sit there for 3 days …
I followed a video on how to enable secure boot and my pc didint connect or post to my monitor. Hopefully this works
holy smokes i thought i was a goner. reseated one of my RAMs and boom. ty very much!
Hi, so I am a first time builder and I don't know if I have done things wrong but I am stuck with no post and absolutely CLUELESS and tips?
Did you fix it
Me too
I am still getting no signal to my monitor
Same
Can u help me if it’s working or not and how u did it
I'm getting 1 long beep and 2 shorter ones... I reseated ram into correct slots (dual channel mode) then I reseated graphics card and I'm getting same result... some1 please help!
I love you thank you
A pc keep giving alarming beeps or siren but still work fine. Usually first thing to do is to replace the PC case and install the RAM in different slots, but some RAM stick are the “leader” stick that must be in the slot 1 to make a pc POST as the other sticks of RAM “follower” sticks that couldn’t POST all by itself.
It may not be the PSU has fault, but replace the PSU may fix it if all the fans works fine when there was no POST. Replace mobo’s battery too. In many cases no PC parts has fault, it just need to replace the PC case, RAM, PSU, battery with another working PC parts, so after doing all that, you ended up with 2 working PC system and not a single faulty PC part.
May need to replace the PC case because some pc case’s back panel is curved outward and need pushed inward to put in the screw to secure the graphic card, so after some years or weeks of use, it pulled things out of place, bow and arrow theory … …
In one of the other cases, each time the power is out in my house, I need to replace the graphic card and installed a graphic card that could POST in the PC, then I install the one that failed to POST back in place and it could POST, so each time the power it’s out I need to repeat that!
Some PC could shut down due to static charges when your hand is only touching the power button to the PC that’s made of plastic (not pressing the button).
Some PC couldn’t POST, just wait a 3 days without using it, then it return to life of POST, this could happen once in a few years of use, like seeing a comet going passing by! Unplug the power cord and HDMI cables to the PC and let it sit there for 3 days …
so, i just found out that contacting support is the best way to find out what your problem is. for me my pc needs the CPU to be reseated. it depends on what light is ON. If you can seem to find it, look for these : DRAM/BOOT/CPU/VGA.
:OOOO thanks~~~~
maybe my monitor is not working anymore, or properly
New power supply. No power goes to mother board. Checked & reset buttons aren’t faulty. Issue started close lightening strike. What would fry on mother board. . ?
Hey i cleaned my pc and and put everything back but this time monitor is not showing anything but no signal what should i do i have tried everything but nothing works
It happened to me twice now, i cleaned all the components took it out from the case. When I installed it back to the case. No Post, I have tried all the troubleshooting steps, even tried using another ram sticks and motherboard. Culprit was the CPU :)
i shut down my pc , and the shut down loading freezes, its been like 10 minutes and nothing, y hard shutdown pc, when i turned on , the fans spinned but my keyboard and mouse was not working and my display either.
Does touching metal discharge static?
or having a rubber wristband to ground you, I've seen them sell some at microcenter
Love the video you said I could ask for help.
First Post so bare with me: I am not getting a POST. Do I have something that is not compatible with my motherboard (see below)?
I attempted to do my own build:
My build:
1. Corsair 4000x ICUE rgb case
2. Gigabyte: B450 I AORUS PRO WIFI (rev. 1.0) motherboard (AM4 Format)
3. AMD Ryzen 5 5600x with include Wrath cooling fan
4. RAM: Corsair Vengeance RGB PRO 32GB (2 x 16GB) PC4-25600 (DDR4-3200) in motherboard DDR slots 2 & 4.
5. Graphics card: MSI Radeon R9 280 in first pcie x16 slot
6. PSU: Corsair CX550F RGB, 550 Watt, 80 PLUS Bronze, Fully Modular RGB Power Supply
7. SSD: Samsung 850 EVO 250gb: in the Sata3 slot 2 (0, 1, 2, 3 are my options)
8. Monitor: Dell UZ2315H (resolution 1920x1080)
Issue: Fans are spinning colors are changing. Light is on the motherboard indicating that the CPU is talking to the motherboard. Other 3 lights do not turn on (DRAM, VGA, Boot).
Any reason why I can't get to the Post screen on my monitor?
Things I have tried:
1. Move the DDR memory to slots 1/2
2. Removed the CMOS and put back after 10 mins.
3. Removed Graphics card and plug into the hdmi slot on the motherboard.
4. Removed the SSD
5. Downloaded Windows on a USB drive hoping to boot off of it.
Help is needed. Thanks, in advance.
I think the gpu might not be working I connected 2 different hdmi cables and the display cable cable on my said tuf monitor and nothin
Same here
Skyy bro same did you fixed it?
@@Sovioo it was the ram. Need it to reinstall it ao came lose
Sovioo it wasnt ram for me
Everything works I did all the steps but my pc is still not connected with my monitor or my keyboard and mouse
Same
How can you use a pc in 1899? Have some god damn faith!
same
The computer boots after I power it off with the button but the second time it boots into the bios safe mode
that you so much
My pc turns on, and from what I can tell, runs normally, however fades to white and then a black ish color, and stays there. Could anyone explain what this is and or give suggestions?
I cannot get my pc keyboard or mouse to work after I removed the cmos battery f1 key not responding.
i’ve messed with the ram and still no fix. i can’t seem to unplug my ram? it’s like the plug is stuck or something. i have the geforce gtx graphics card
Not sure which one you’re talking ab but for both ram and gpu there should be a little tab you have to press down to pop them out
Yes rams are simple to pop out graphics cards have a small lip at one end that may get stuck on occasions when taking them out try that 😁
My pc won’t connect to monitor I’ve tried everything but still no signal. What should I do?
First thing I do is reseat the RAM
If that doesn’t work, I usually reseat the CPU cable
(HELP)
Only watched anime last night, then turned it off when I was going to sleep, forgot to turn off the AVR. I tried everything that was on youtube, I tried booting with one ram on every slot, tried resetting the BIOS because I overclocked the RAM to 3000mhz(it worked without issues), tried reseating everything, there's a red led light on the DRAM and sometimes on the CPU. Everything with led in my PC turns on, all fans are working, the fan on the gpu is spinning but then stops after a few seconds. The Aorus logo won't light up. And the RAM Led is not synced with the Board. Please help :(
Specs:
Ryzen 5 2600
Aorus B450 Elite
Gigabyte RX570 8Gb
Kingston HyperX 8Gbx2 3200mhz
My life is over my motherbored lights on but fans graphics card everything else but the motherbored lights are on I don't know how to fix this): help
Well I did all the steps but after taking the cmos battery out and putting it back in after 5min doing everything shown on video (it was unplugged and power switch off) now my computer gets no power at all lol