Not a mk1 owner, but stumbled across the page this morning. Well done guys. Subscribed purely because this is what car ownership is about. Appreciating the work that goes into a build. We are just lucky to see the effort on the other side
Jeez bru I wish you could've done this job at my house where there is plenty light. I take my hat off to you wotking with a flashlight. In my younger days we also did it this way. You simply do what you can with what you have. Brilliant
Like the other guy I too stumbled on this channel today, I enjoy SA content like this. I own a polo 9n 1.4 consider rebuilding the engine myself with all stock internals no fancy stuff.
You could always have undersized bearings which make you believe the crank is turning fine. Best is to always use a mic or plast strips. You never know... Also the engineering companies sometimes make mistakes so it is best to check the lash (forwards and backwards movement of the crank. After you installed the mains. I have seen guys break conrods or suffer heavy oil leaks because of engineering mistakes.
I enjoyed the video. Just a Lil more detail guys on the manuals. Drop a link as to where we can get the manuals. But further more. Very proud of u guys.
when using a torque wrench you should only click once, if you click more than one time then it will over torque it just slightly. Other than that great job!
Thanks buddy, we were just double checking that everything is torqued and that we didn't miss any bolts. But thanks for the feedback and help we appreciate it 🤙
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
Not a mk1 owner, but stumbled across the page this morning. Well done guys. Subscribed purely because this is what car ownership is about. Appreciating the work that goes into a build. We are just lucky to see the effort on the other side
Appreciate the support bro🙌🤙
Proudly South African here.. Keep up the great work👍🏼💪🏻
Thanks alot bud, we will try our best👍
Jeez bru I wish you could've done this job at my house where there is plenty light.
I take my hat off to you wotking with a flashlight. In my younger days we also did it this way. You simply do what you can with what you have. Brilliant
Video, vlogs, whatever you wanna call it
Me: I like this guy
😁👍
Like the other guy I too stumbled on this channel today, I enjoy SA content like this. I own a polo 9n 1.4 consider rebuilding the engine myself with all stock internals no fancy stuff.
Dope video, guys! Very informative! 🙌🏽 Wish I saw this a year or 2 ago lol!
Thanks a lot man 👊
Can't wait to see the MK1 finished ouens! 💯
Soon bro👍👍
That Brasso hack has me hacked 😂😂
🤣🤣I'm glad man
You could always have undersized bearings which make you believe the crank is turning fine. Best is to always use a mic or plast strips. You never know...
Also the engineering companies sometimes make mistakes so it is best to check the lash (forwards and backwards movement of the crank. After you installed the mains. I have seen guys break conrods or suffer heavy oil leaks because of engineering mistakes.
Hi, what's the size of the triple square bit or socket you use to torque the head bolts? Thank you!
I enjoyed the video. Just a Lil more detail guys on the manuals. Drop a link as to where we can get the manuals. But further more. Very proud of u guys.
Glad you did man, we will definitely look into it and we got the manual from amazon.
Which spline bit are you using for head screws
I'm about to rebuild my motor myself right now
Hey guys, awesome work. Can you help me connect a fuse box for my mk1.
when using a torque wrench you should only click once, if you click more than one time then it will over torque it just slightly. Other than that great job!
Thanks buddy, we were just double checking that everything is torqued and that we didn't miss any bolts. But thanks for the feedback and help we appreciate it 🤙
Where did you buy the rebuild kit and how much was it i need to rebuild my motor aswell and need some advise and help please
248 subs, you guys are growing kak fast
You think so? Thanks so much for the support 🙏
@@crispyworx2360 ya of course
Nice video but the main specs like the torque measurements where left out
Can you make a vedio on what cars you drive on a daily basis But still GREAT VEDIO
Not a bad idea, we will see if we can do something on that in a future video.
@@crispyworx2360 ok
Hey guys,do we not set the engine timing when fitting the Cylinder Head. That "1 Fire 4 Rock" procedure?
Yes we do, you exactly right
Hi guys, what were the torque measurements for the crank and pistons?
Champions…. How long does it take you to complete the whole process…?
And much would charge if incase I want to rebuild the whole engen 🙏🏽🙏🏽
Heyy dude this is not usually Golf Carb, what is the carburetor name that you used
Can you guys tell me if its possible to rebore a 1.4 block to 1.6 with no issues?
Great Job gents. How much for a Rabbit Golf Build?
More Sa guys must join the platform
💪 Sa power
What engine is this ? Is it a AGY Vw engine thank you for sharing I am from South Africa
Good job bro i have vw mk2 amazing car💪🏻 I want install turbocharged 😁
Thanks man👍, what's holding you back?
Crispy Worx nothing bro
30. 60 and 90nm for VW AF engines.
how much was the rebuild cost?
Single oil feed
What that a et engine code
looking for org vw mk1 parts how can i get help im in zi
mbabwe
Bros your hands are clean?
🙌😅
Hello, what engine is it? what engine code is it?
Its a 1.3 carburetor engine
@@crispyworx2360 My Engine en 1.5 (1471 CC) code FC. Year 1975
I need help of vw polo playa engine rebuild I am from pretoria
Like nothing happened exay 😂
Or a hm engine code