My homemade power hammer, after 13 years of operation
HTML-код
- Опубликовано: 18 окт 2024
- For thirteen years of use, the hammer did not require repair and replacement of consumables. The power hammer was assembled by me in 2006 from improvised materials. The weight of the striker (falling part) is 12 kg. 220 beats per minute. Electric motor 1500 r / m. 1,5kv.
My website: sites.google.c...
My Facebook group
/ 19610. .
Pinterest
/ 0nftxxy5mb2. .
Channel Support:
www.amazon.com...
/ shurap
Check merch to help support the channel:
teespring.com/...
I do not answer the questions of cost, for details see the website in the contacts section.
Be polite, I approve the comments with obscene vocabulary.
All the best to you, peace to your home.
Best regards, Dmitry
Perfect! Good design, just needs a little oil on that foot lever, ha.
@Dmitry,
what should I write, I'm just speechless again.
You again impressed me unbelievable.
I'm looking for a solution so long and you come round the corner with this very simple design.
WOW very nice
A wonderful piece of engineering.
You sir, are a genius.
Results are all that really matters in the long run right? Your work speaks for itself.
Looks like a neat design, and has proven itself by lasting so long. Well done!
Yes! I've been wondering the design for a long time. About to make a hammer of my own. Thank you!!
Nice, Thanks for showing us , Dmitry!
i like how you can see where the paint has burned off due to the slag from flux and scale hitting it
13 years and no repairs! That's as impressive as your billets! Well done!
Bart Layman Why did you think "no repairs"? The rubber strip above hammer-anvil was replaced more than once, I guess...
I read the description. Rubber strips would be consumables, but things are easily lost in translation. I think belts rubber grease and dies would be maintenance
AWESOME old school never fails
Impressive my friend! Its amazing how much your welding has improved over the years.
@Dmitry
Making something dead similar from a blown John Deere hydraulic piston but have been at odds as to how to set it up. Thank you for the video that has become my inspiration towards finishing this project!
F'ing sweet. I wondered if you made it. Love your knives, and, I'm totally impressed with that striker. Thanks for the detailed peek.
Pretty clever use of odd-ball pieces and parts. The real beauty is in its simplicity. MacGyver (RDA character) would be proud.
13 beautiful, beautiful years. Well done.
Wow! Just like factory made.... Nowadays, used most of my streaming time in your helpful channel.
I like it, lots of familiar parts went into the build. Great job.
Awesome nice simple design, surprising it's never needed a new motor drive+clutch belt after all these years!
Impressive, nice design and thank you for sharing this. I very much enjoy your channel!
13 years and never slung a rod, pun intended lol. Nice machine
Impressive, and I'm quite baffled that the old connection rod can take that kind of abuse for so many years - great work.
Отличный молот -трудяга.
Connecting rod! Awesome!
had no idea you built that! very cool!
It’s made beautiful blades. Well done. Some more blades please
So cool.
Oh wow, I see a crankshaft journal, lobe and counterweight piece with a connecting rod, and is that a leaf spring?
Porzadna robota!
Thank you!
молот классный! было бы ещё не плохо увидеть более детально гидропресс с пояснениями и как закреплён гидроцилиндр? я думаю многим будет интересно.
наверное со временем сниму, просто для этого его нужно немного разобрать.
с нетерпением будем ждать!)
Ну, наверное со временем о всех инструментах стоит сделать по короткому видео.
Great Job. If my father was still alive I would tackle something like this. I have access to all the parts but would be reluctant to try it on my own. Do you have plans for your design?
Good job. Well done. Anything to save hours on your shoulder that will thank you when you reach a ripe old age.
Show de inteligência e perfeição muito top parabens
Nice job Great design ......Well done
Would be nice to see a view of the whole machine
Now I know what I got to do.
Thanks!
You could call it "Jumpy"!
Or Fappy hehehe
Смотрю, во время ковки клинков из дамаска острие сначала смотрит вниз, а потом ты молотком его наверх загибаешь. Это для того, чтобы рисунок шел параллельно режущей кромке, а не параллельно обуху? Я правильно понимаю?
верно
I am so impress to your hammer verry marvelous
Когда то давно, на остметале наверное, я видел этот молот, только рычаги изменились, тогда там были две пружины в направляющих амортизаторах, если не ошибаюсь
I would recommend some counterbalance and fill the pipes with concrete i love the strap tensioner system too seems to work nicely that jumping up and down die plate worrys me a littleyou cud probly cut an old belt and put a strip aroundit to wedge it still
A spring hammer has its best performance when the spring is doing most of the work. When the ram is moving slowly the hammer should never come into contact with the anvil. The proper action is as follows: The ram, acting against the inertia of the upward traveling hammer and spring, starts to compress the spring as it is traveling downward. As the ram begins to decelerate towards the bottom of its stroke, this energy is released, throwing the hammer downward in the opposite direction faster than the motion of the ram, in effect multiplying the force. A good balance of operational speed and spring size is necessary to maximise this effect.
Fantastic 👍👍👍
What type of steel did you use for the hammer bar? Did you do thermal treatment?
Very, very ,very Nice !!🇧🇷
Outstanding
nice hammer... a little grease goes a long way and it looks like your motor base is wobbling.
Good. Thanks
Спасибо мастер.
Bravissimo!!!
Legend
Very good design
I always that that was a metal leaf spring in the middle, now I see its some type of leather or other flexible material, neat!
this rubber reinforced belt
Отличный и полезный инструмент при достаточно простой конструкции
Дуся-агрегат! :-)
I would love to know how you made this!
The anvil/bottom die seems to jump a lot you should weld it in to stop loosing power
NICE!
Thank you for taking your time and showing us your power hammer do I have a question how much force can a power hammer put down
I do not know. weight of striker 12 kg
Enjoyed
Nice way to repurpose old engine parts.
Awesome ! Indeed why invest thousands when you can craft it out of scrap parts.
Parabéns!
Valeu, por ter mostrado os detalhes de seu martelete. Vou construir um igual.
O motor é de quantos hp?
1,5 sq. M.
спасибі Dimitri
spasybi Dimitri. From Botswana. budʹ laska, pokazhitʹ nam, yak vy zrobyly vashi inshi mashyny.
Why is your anvil not solid? See it bouncing alot its got to loosing some of the blow in it.
Nice 👍
super!!!
What is Russian for "You're a genius!"
Although he might know...he is Ukrainian not Russian not the same thing.
terceira vez que venho ver sua maquina, uma pena só poder deixar um like.
Eres un genio?
👍👍mantap
Is that your forge blower sitting behind the hammer?
right
Покажи поподробней про свою приблуду для плоскошлифования на гриндере
такое видео есть на канале
ruclips.net/video/FfQixjeE7-o/видео.html
shurap
Не. не это. Там у вас еще один есть. Меня конкретно движок интересует и как натяжной ролик установлен. Что то там хитро как то. Ну и заодно тот что полирует. Вперед назад. Какой то забавный он. Спасибо.
Wow, very impressive!
Спасибо за подробное видео. Давно хочу себе мехмолот, но как то сильно сложно кажется( Такой вопрос, почему редукция выполнена через 4 шкива, а не на прямую, через фрикцион?
наверно просто нигде не найти ремней такой длинны)))
тогда придётся ставить метровый шкив для достижения нужных оборотов
Nice! Do you take apprentices?
I do not have the opportunity, but I answer any questions
гениальность
Будьте добры, укажите характеристики мотора для данного станка, больно уж интересно
1500 об/м, 1,5кв
Awesome stuff, but as no-one else has pointed it out. 2018 - 13 = 2005.
if you count from 2006 inclusive, you get 13
Я не смотрел автора видео и только подумал, что очень знакомый молот, как пошли титры.
Hello brother
I am Kishan vishwakarma
i want to buy this machine
help me
Where can I purchase one of your knives?
I’m curious. Why is the bottom strike plate not secured to keep it from bouncing?
In the beginning, I did not have another piece, and then I was already used to it, I'm trying to change everything, but I do not have enough time.
I see, I was curious if it added any benefit in your forging process. I really love your blades, they are really amazing.
а почему не замуровывали молот жестко? для чего оставили подвижной наковальню? ради "тонкости" ковки?
Задумывалось, как для снижения шума и вибрации, наковальня стоит на резине. Насколько это верно не знаю, но я так привык. Молот тоже стоит на резине и приделан к полу анкерами.
тоже всегда смущала наковальня прыгающая. может под нее песка насыпать чтобы вибрации гасить
i want to buy this machine help me
gracias por mostrarlo colega herrero
What is that connecting rod from if I may ask?
What's around the ram holding it
Самоделкин👍☝
Pretty good idea thanks budy
I love the simplicity I dont understand the anvil loose. is that not a waste of energy from the blow. I am using a old oxygen bottle for the base of my anvil. it will be concreted 2ft deep on a pad poured just for it. The more solid the base and foundation the easier the metal will move. it seems your metal is bouncing as you work it. I really like your design except the anvil is not solid you can even see the whole unit bouncing.
This is a necessity in my case to reduce vibrations on the foundation (the anvil stands on rubber).
@@shurap oh i get not wanting to cut bust your floor. if you use it every week or day for 13 yrs maybe you should commit to cutting a 3x3 hole in floor and cement it in isolating from the rest of the slab. it would hit twice as efficient so much energy is lost buy putting rubber or wood under them. but i do like the hammer you did a very nice job it just needs something to hit against
Motor how much HP?
Дмитрий здравствуй! Подскажи диаметр падающей части(штока).
50 мм.
muito bom e criativo .ies
You change?
Price coto
It's a cool machine . but ...
..."assembled by me in 2006".. + ..."13 years of operation"...
2006+13=2019
We are in 2018 .... xD
Скажите а проточка с боку на штоке пч там что типа шпонки от люфтов?
Там нет проточки, это след на смазке.
Спасибо за ответ. Т.е. круглая баба не люфтит и ходит в направляющей. Просто многие делают из квадрата поджимают ее всячески при этом поясняя что круглая люфтит
@@SashaSasha-pr7ty не люфтит, уже 13 лет - всё работает, только нужно перед работой пару капель масла и всё.
@@shurap спасибо большое за совет
👍🏻👍🏻👍🏻
Круто !
Hadir boskuh