Bass Boat Dual Graph Mount DIY Heavy Duty Adjustable and Removable
HTML-код
- Опубликовано: 11 окт 2024
- In this video I'm building a Heavy Duty dual graph mount for a bass boat.
Check the links below for the part nr's of the items I'm using.
Order all parts at McMaster Carr
Aluminum Slip-on Framing, 1 5/8" OD Rail , 2 feet long ( you can order any length ) - Item #4699T29
Aluminum Slip-on Fitting, Trough-Hole offset Rail support for 1 5/8" OD Rail - Item #4698T165
Aluminum Slip-on Fitting, Round Flange Rail End for 1 5/8 OD Rail - Item #4698T54
Aluminum Through-Hole Flush Rail Support for 1-5/8" Rail OD - Item #4698T3
316 Stainless Steel Phillips Flat Head Screws 1/4" -20, 1 1/2" long pk of 10 - Item #91500A546
18-8 Stainless Steel Nylon Insert Locknut 1/4"-20 Thread size, pk of 50 - Item#91831A029
Plastic Head Thumb Screws, Large grip 3/8" -16 Thread Size, 1" long pk of 5 - Item#91185A867
18-8 Stainless Steel Ring-Grip Quick-Release Pin with Lanyard, 3/8" Diameter, 2-1/2" Usable Length - Item#94975A247
You can get the other 8-32 stainless screws and nuts from any major hardware store .
Use nylon lock nuts.
Thank you sir for posting this. I made one as well modified for my needs plus made a live scope pole given those are also overpriced and was trying to find a option better than pvc diys. Much appreciated!!
Right on !!
Excellent design, the few that I’ve found online range from $150-$500 I’m definitely gonna replicate yours thanks for sharing
The problem with the lower cost ones is that they will be of poor quality. This design is solid for a minimal cost. Thanks !!!
Nice quality. Best one I've seen so far!
Happy to hear that!
Thanks for information. Awesome design. I modified the base with a Aluminum Slip-on Fitting
Round Adjustable-Angle Flange Rail End for 1-5/8" Rail OD. Hopefully this won't give me too much trouble to fold it down for boat storage.
U welcome!! That is what is nice about this design, you can change parts to make it work for you.
Would definitely be interested in seeing yours as I want mine to fold but built with this design!!! Please share
Thanks!!! Great idea and design!
Enjoy!!
Great job! Well thought out idea.
Thank you! Cheers!
Thank you for very good information. Great job. I’m going to try to do this.
Do it, using mine ever since, no problems at all , built like a tank.
Great idea and great video. How do you run the cables?
I have 12v outlets front and back of the boat and same with bottom piece of the graph mount. I can move front to back very easy, I also have double SI sensors wired front and back of the boat. Livescope I can move it anywhere on the rails I have.
Very cool. I think thats about what im gonna do.
Good luck !!
That's really cool. If there was a way to put a smaller diameter aluminum pipe in the top half where it could slide up and down that would be great.
what are you trying to do exactly? so I can figure it out .Do you want to be able to extend it by having another pipe inside the base one? then the fittings will have to change to work for the smaller diameter pipe.
@@kevinbucner2739 Not necessarily extend but adjust. It would be cool to be able to adjust the overall height rather than, or in addition to removing it. What I'm thinking, the only fitting different would be the top piece where the mount goes. Definitely a cool idea.
To be able to do that you have to step down to 1 1/4" pipe for base and 1" for a top piece. The 1 1/4 has an 1.049 ID and the 1" pipe has 1" OD so it will fit inside the 1 1/4 pipe. Then you need the fittings for the 1 1/4 for base and sliding mount and a 1" fitting for top mount.
Here are the fittings part nr's :
1" pipe : 4699T27
1 1/4" pipe : 4699T28
1 1/4" flange base mount no holes : 4698T53
1 1/4" Flange base mount 3 holes 1/4" dia : 4698T26
1" fitting top mount : 4698T1
Off set connector to slide on 1 1/4" pipe : 4698T72
U can drill a hole in the 1 1/4" pipe and thread 3/8-16 and use a thumb screw to hold the 1" pipe inside the 1 1/4 pipe at the height you want.
Nice job looks professional. Question , where did get the plastic material that you cut? Is this delrin or something like that? I like that you can adjust heights and swivels. Great idea!!!!!
Thanks!! It is called starboard , a marine grade delrin , I got it from mcmaster carr also
www.mcmaster.com/products/sheets/comparable-to~starboard/
Very nice video. Great detail and build demonstration. Did you purchase all of the parts including thumb screws and quick release pins from McMaster-Carr?
Thanks! all parts were purchased from McMaster-Carr. Check links in the description for part nr.
Very good job I’m trying to order but I’m just doing a single top mount what’s part # for the top square piece?
Aluminum Through-Hole Flush Rail Support for 1-5/8" Rail OD - Item #4698T3
I added in the description also. Thanks.
I am going to do this thanks
Have fun. It will last you a lifetime. I also installed another bottom piece in the back of the boat so now I can move it from front to back. I installed 12v outlets at the front and back of the boat and the livescope mounts on my side rails.
Ingenious
Thank you!!
very nice but i dont think it will work for the bass boat guys of we run in rough water or even calm at 70?
If you run in rough waters, I run in lake Michigan with 2-3 ft anytime and no problems whatsoever. I have the base mounted with bolt and nut tru the deck , fender washers under the deck, solid.
Hey thanks bud... yes I fish Lake Erie and the Ohio River alot
How do u remove it when ur driving u boat? Like fold it down or anything?
I don't have to remove it, it is solid as a rock, you can drive 40mph with no problems. But if you want to remove it just slide the pin out and pull it out and lay it on the deck.
@@kevinbucner2739 can u do an updated video of it mounted onto the boat?