I DIY bluesaab, I connect it to the CD, my phone can find bluesaab V6, but the CD can't play music, then I connect 0.5 Ω speakers on the bluesaab motherboard, I can play music, Bluetooth is fine, but the car can't play music, I don't know why?
@@alxelin9546 that does indicate that something is hapening, yes. Perhaps connect the FTDI to the other pins (UART 2) and use a terminal program to see if there is any output.
I changed to the UART 2 socket is just like that Error: Activating device: KO. Please, verify the boot mode configuration and check the serial port configuration. Reset your device then try again... @@saabfeverfrank
@@alxelin9546 When connecting to the UART2 socket, you should just use a terminal program (Hyperterm or Putty) to look at the data on the line, it sounds like you are still using the flash program. Also, sorry for the late reply.
@@TheSaab04 I believe this is the Denso unit: 44.cdn.ekm.net/ekmps/shops/1a3c5a/images/saab-9-5-2017-18-denso-uk-europe-satellite-navigation-map-updates-map-discs-available-complete-set-879-p.jpg?v=2972021-103200
Thanks for this video. What's the part number for strip of pins at 12:30?
Here's an ebay link:- www.ebay.co.uk/itm/203585637263
I DIY bluesaab, I connect it to the CD, my phone can find bluesaab V6, but the CD can't play music, then I connect 0.5 Ω speakers on the bluesaab motherboard, I can play music, Bluetooth is fine, but the car can't play music, I don't know why?
你好，FTDI 电缆用的多少V呢?3.3v or 5.0v?Thank you
两者都应该有效。 我的是 5V，但只要您使用我使用的接头，那么 bluesaab 电源调节器应该处理任何一个。
@@saabfeverfrank Hi！ I give the Bluesaab brush program, the green light on the motherboard has been flashing, this is the brush program success?thanks
@@alxelin9546 that does indicate that something is hapening, yes. Perhaps connect the FTDI to the other pins (UART 2) and use a terminal program to see if there is any output.
I changed to the UART 2 socket is just like that Error: Activating device: KO. Please, verify the boot mode configuration and check the serial port configuration. Reset your device then try again... @@saabfeverfrank
@@alxelin9546 When connecting to the UART2 socket, you should just use a terminal program (Hyperterm or Putty) to look at the data on the line, it sounds like you are still using the flash program. Also, sorry for the late reply.
Too bad mine has the navigation
What Nav unit do you have? BlueSAABs do work with the Denso units but not the Kenwood ones.
@@saabfeverfrank 2005 Saab 9-5 aero
I’m sure is the denso nav
@@TheSaab04 I believe this is the Denso unit: 44.cdn.ekm.net/ekmps/shops/1a3c5a/images/saab-9-5-2017-18-denso-uk-europe-satellite-navigation-map-updates-map-discs-available-complete-set-879-p.jpg?v=2972021-103200
@@saabfeverfrank yes is the same I have
@@TheSaab04 Better start making yourself a BlueSAAB then!!!