We Put Vinyl Siding on ONE SIDE ONLY??
HTML-код
- Опубликовано: 6 июн 2024
- 00:00 Intro
01:06 Rainscreen behind vinyl
01:55 Vinyl starter strip
02:13 Fastening vinyl siding with screws
02:38 Trim around door
02:58 Mounting the starter strip
04:18 J channel around a door
06:54 Hanging the first course of siding
11:56 Elaina helps continue up the wall
24:30 Window trim detail
24:55 Snap locks into utility trim
26:48 Siding the peak of the gable wall
32:39 Frieze board
33:11 Taking down pump jack scaffold
34:50 Door trim
35:44 Finished product.. and storm damage
--------------------------------------------------------
🔨 Alex's Tools: urlgeni.us/amazon/AlexsTopTools
🧰 Alex's Toolbelt (Stile): toolbelts.com/?rfsn=7781903.8...
(get 10% off with code MasonDixon10)
👕 Alex's Workwear:
Shorts: truewerk.pxf.io/CloudShort
Pants: truewerk.pxf.io/T3pant
Jacket: truewerk.pxf.io/WoobieHoodie
Long Sleeve: truewerk.pxf.io/B1LongSleeve
Short Sleeve: truewerk.pxf.io/B1ShortSleeve
🌱 Elaina's Garden Gear: urlgeni.us/amazon/ElainasGard...
🌻 Favorite Seed Starting Trays: collabs.shop/pla2vz
🐥 Organic, Non-GMO Chicken Feed: bit.ly/layermash
(get 15% off with code masondixon15)
Our Camera Gear ⬇️
-Main Camera 1: amzn.to/4aKsars
-Main Camera 2: amzn.to/3Hbf4pB
-Drone: amzn.to/3TKkMGu
-Wireless Mic: amzn.to/3wDwYvL
-Voiceover Mic: amzn.to/3kVu0A4
-Main gimbal: amzn.to/3HhH8Hj
-iPhone gimbal: amzn.to/3HfX1ya
-Camera backpack: amzn.to/3wB6DOS
--------------------------------------------------------
Follow us on IG & Facebook for real-time progress!
Instagram: / masondixonacres
Facebook: / masondixonacres
DISCLAIMER: Links included in this description may be affiliate links. If you purchase a product with these links, we may receive a small commission at no additional cost to you! Thank you for supporting our channel ☺️
#building #selfbuild
![TRASH or PASS! Eminem ( Houdini ) [REACTION!!!]](http://i.ytimg.com/vi/cB1WrZcMwMc/mqdefault.jpg)
Your under layer is a very important feature. Vinyl siding lets a lot of water behind it. Many people think it is water tight but water goes behind it through all of the J channel around widows and doors. With the plywood sheathing you do not need to screw the vinyl siding to studs. Sorry to see what the storm did to your finished job. Great video, thanks.
I was never a fan of vinyl but I've seen some very attractive installs of late that do a great job of simulating, for example, a board and batten style. If you're looking 5 or 10 years out before you build the main house, yes, the vinyl siding makes sense rather than the more expensive James Hardie products. Nice work. But then again, you're engineers, so your attention to detail is a cut above and it shows.
Another great video. Made me gasp when I saw he storm damage. Ahh, home ownership. At least it's recoverable.
Haha it made us gasp when we first saw it too 😂 it set us back a bit but got mostly everything replaced
Unlucky with the storm. U are resilient, The volunteer gave u a day!. Fairplay nothing stops ye though
You two work well together 👍🏼
Good work, Alex and Elaina! I've never had much, if any, love for vinyl siding, but for something short-term, it certainly is cost effective and it won't hurt removing it in the future as much as a more premium option might.
That storm damage though! I saw on IG when it happened, what a bummer. Glad everyone is safe.
Thanks Matt! We thought for a couple seconds the wind might take the house.. it was insane. Very glad to have sustained only the damage we did, others lost full barns and got trees through their houses
Your house looks so incredibly state of the art! By that I mean the materials, quality of construction, design, workmanship, etc. seems flawless!! Did you design it yourself? Are you a carpenter by trade? How much will this entire build cost you? Do you and your wife ever fight?? Great videos! Keep ‘em coming!
Wow, thank you! Haha yes designed it all ourselves. Engineers by education, no trade background. Some cost videos are published, will have more coming eventually once we have the editing bandwidth. We have our disagreements but overall are pretty good at collaborative problem solving 😄
Looks great! What a bummer about the storm. Based on the trees that looked bent over like snapped tooth picks, replacing some vinyl siding is a minor price to pay. Glad everyone was safe.
Absolutely, everything is replaceable except people
The fastening is forgiving. If some screws are not exactly in the center of the slot it is ok. You are overthinking it way too much. Hitting the sheathing is fine too.
VINYL SIDING DONT HAVE TO GO INTO STUDS SCREWS IN THE SHEATING IS GOOD HOUSE LOOKING GOOD THOUGH NICE
What a journey it’s been for you two. Some great editing to put this video together too. Just came across the channel so now I’m gonna have to subscribe and follow along.
Welcome aboard! Thanks for watching and following the journey, much more yet to come 🙂
Good video keep up the good work
You're doing great bro, but you really should have safety measures in place to prevent falls.
GOOD JOB .
My guess is that the slots are not on "centers" because most vinyl siding is just fastened to the sheathing, not studs.
I just can't accept that 😆
@@MasonDixonAcres I know.. I am right here with you, but I am pretty sure that is why.
That’s true. Vinyl siding was meant to be fastened into the studs, that’s why slots are not 16” off center
Regards from siding contractor from Canada😉
If you you ever remove it you’ll realize you’re going to putt the vinyl off of the nail before the nail comes out the sheathing
I applaud your drive and ambition but after watching this build series I would honestly rather be in debt and not have to do any of this 😆
lol that is indeed what most people do
Nice work. Sorry to hear about the storm. Curious if the Hardie held up any better? Did the Slicker Max do its job?
It received two small scratches, but the south wall did bear the brunt of the wind. The rainscreen was unaffected. I'm glad it gives continuous support to the back of the siding in the case of flying debris. Not something we really thought would come into play in our area, but clearly that's not the case going forward
What bad luck with that storm! I don’t have a Spotify playlist, but since you chose blue grassy soundtrack on this video, you might like the band Watchhouse, formally known as Mandolin Orange. They are acoustic laid back, maybe more suited for chilling out than working.
Haha thank you for the recommendation!! We do plenty of chilling out too 😆
Awesome.
Amazing progress! What is that yellow brace you have on the end of your ladder at 34:54? Where can I get that?
Ladder stabilizer. Any big box store or amazon!
The last bit of video is reason you don’t get vinyl from Lowe’s or Home Depot. It’s thinner and doesn’t hold up, also becomes wavy, just look at a double wide trailer a year after put in. ABC supply sells some really nice vinyl for same price if not cheaper. Vinyl is tricky because if you buy the good stuff it’s almost same price as LP or James hardy. The pvc is awesome, I just did some board and batten as trim around 2nd floor dormers on a 5000 sq ft home. Itll last a lifetime but a little pricey
This is Ply Gem .040" thickness, since it's temporary we weren't going for the most premium vinyl out there. What brand/thickness do you typically get? In my fairly limited experience, the supply houses are more expensive than the box stores for the same exact product even with their house account discount applied. Some of the guys we've worked with on this project have been shocked to hear the prices I've paid, because they never look outside the supply house. Granted, there is certainly headache factor when buying from box stores, but with the best price and easy returns, sometimes it's worth it.
So sorry about the tornado(?) damage. When you assembled the door trim with the pocket hole screws did you glue the joint as well? The nice thing about PVC trim work is that gluing it is permanent and weatherproof. I haven't watched any of the other trim work that you have shown, so I don't know if you are gluing the joints or not.
Appreciate the comment! I actually think we forgot to glue those joints on the door trim. I’m not sure how much the glue is waterproof long term, but the amount of water that could potentially get in that joint and cause harm is pretty negligible imo
do you really need the slicker max with zip sheathing?
Pink
The siding is probably metric. (450mm and 600mm) spacing.
potentially, never thought to measure it with a metric ruler but would be interesting to see
Did any of the James Hardy get damaged by storm?
It received two small scratches, but the south wall did bear the brunt of the wind
Vinyl siding is the ugliest siding possible. I have put up 1,000’s sq. Ft. Of vinyl. The biggest downside with vinyl siding is ultraviolet radiation deterioration over time. Vinyl siding eventually gets chalky looking. It also is prone to supporting algae growth over time. Prefer cementatious pre-finished siding or quality cedar siding.
Interesting, at the end of watching this video, 64k views but only 3 likes.
lol I wish we got 64k views in the first few hours 😆
At this point in time, 220 views and only 20 likes. Only about 10%. People watch this channel of people doing hard work and they can't even lift a finger to touch the thumbs up. Come on you lazy bums!😂
why?
You are un nesscessarily worried about the slot holes
The timber Stub widths eg 35mm
Will allow for any variations - u Wally
Have you calculated the extra cost using the screws? I love the screws, but at what extra cost?
It was like 70 bucks for two pails of screws. Probably would have been 20 in nails. So call it 50 bucks extra for screws, and which will eventually get reused on something else when taken out