How to Replace Rear Brakes 99-04 Jeep Grand Cherokee
HTML-код
- Опубликовано: 6 авг 2024
- Buy Now!
New Brake Kit from 1AAuto.com 1aau.to/ia/1ABFS00863
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old rear brakes. This video is applicable to the 99, 00, 01, 02, 03, 04 Jeep Grand Cherokee.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/taaA/1AXAA00013
• Pry Bar 1aau.to/tb4/1AXAA00020
• 18mm Wrench
• Dead Blow Hammer 1aau.to/tep/1AXAA00091
• T45 Torx Socket 1aau.to/tkf/1AXAA00008
• 1/2 Inch Breaker Bar 1aau.to/tdM/1AXAA00078
• Ratchet 1aau.to/tJ5/1AXAA00016
• Torque Wrench 1aau.to/tiE/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Paper Towels 1aau.to/tf7/1AXSS00035
• Floor Jack 1aau.to/tiG/1AXAA00068
• Jack Stands 1aau.to/tiM/1AXAA00065
• Large C-Clamp
• Rubber Mallet 1aau.to/tS/1AXAA00413
• Wire Brush 1aau.to/tbo/1AXAA00079
For More Info visit us at 1aau.to/h/ayR/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You made reinstalling the clip look so easy. The new clip that comes with a new set of break pads isa lot more difficult than you might think. Otherwise, your video made me almost feel like I’ve been doing this for years. Thank you so much and keep it up! JT
Thank you for keeping these videos educational & instructional only. NO background kids, pets or music is the best way to have no distractions interfering with important information.
I appreciate that your cameraman will get underneath the car and down on the ground to get a good view of what you are showing us. VERY well done video, very informative.
+Scott Johnson Thank you very much!
Thank you for taking the time to show each step in a clear and realistic way. The guy doing the work explains the reason why he's doing each step. Very helpful. Thanks.
+Daniel Bennett Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I have always done my front brakes on the wj. I have always thought the rear was too difficult or I needed a special tool. Probably because it looks different because of the clip. So I have always paid a shop to do it. Your video have me the confidence to do the job!
Great video. Thanks for being so detailed and clear. I hadn’t ever replaced the rear brakes and rotors by myself before. It felt great when I finished. Thanks again for helping me so much with the video👍🏻
Great instructions, the task was made simple for a non-mechanic like me. 👍 I want pay for another brake job ever. ☺ Thanks for sharing your knowledge and video.
+sterling mcgee Thank you for your positive feedback! We are happy we could help.
Im not sure which spring you had but it took 15 min to change pads and 1 1/2 hrs to get that @@!@#$%%$ spring back on!
Your not alone!! Most frustrating brake job I have ever done because of that damn clip!! And it still makes noise!
No kidding... I'm 2 hrs into the spring and finally came in to watch youtube. Obviously, it's simple. Look at this guy just tap it into place.
Great video that gets to the point, step by step instruction that anyone can understand
Thank You !!
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Kevin Meier
You were very helpful thanks a lot got the brakes fixed thanks again
I'm going to do the rear brakes today on a 03 cherokee. I yhink this video will be very helpful
+Alan Sauer Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Excellent video! Will be buying parts from you soon
+Mike A Thanks for checking us out. We look forward to doing business with you! 1aauto.com
Great Video!!! Great Lighting, very clear instructions! Can you do one for the E brake :))))))
You mean the rear brakes?
Good job 👍 thank you very much for let us know the right way to replace it
Great video thanks!!
Straight and to the point. Thank you.
+818116A Thanks for checking us out! 1AAuto.com
Thank you! Great video!
Wow very job good thakns for your time happy Independence Day
EXCELLENT JOB and Video ! Thanks for my GC WJ 99 , Best Regards from Jeeper over the Seas ;-)
+AlfaSvD Thank you!
A nice and clean job!! Thank hoy.
+Veneno Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Great video I will be doing my brakes today. Wouldn’t it be better to start the car before pumping the brake pedal to build pressure, or else wouldn’t you just be building up vacuum pressure?
Would have been a good time to rebuild or replace the caliper. The piston in this type caliper can later stick in the caliper bore after simply pushing the dirty piston back into the bore. The piston will move out when applying the brake but not retract causing the job to be redone on a later date and possibly having to replace a warped rotor.
+Bob Kodadek Thanks for checking us out and the feedback, we appreciate it! 1AAuto.com
What kind of black grease is that??? Great video ill be doing the brakes on my 03 soon
Thank you & God bless. Very clear and easy to understand.
+Al Payumo Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Is there a rubber part that can be removed and replaced with a new one where the slide bolt goes in? And is this one where only Sil Glyde or similar lube can be used to grease the slide bolt,otherwise with regular green brake grease the rubber will swell and the sliders stick and cause hot brakes?
my confidence just shot up ....made it look easy!!
+Carlos Arriaga Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Gracias 🙏🏼 GOD Bless You!!! 😃🙌🏼👍🏼
exactly what i needed!
any ideas how to remove the crud from the center caps (12:53)? i have that issue and it's a bit worse.
+steelerdynasty2007 It looks as though it may be the clear coat on the wheels that is starting to let go. There isn't an easy way to fix it without either painting or refinishing the wheel. 1aauto.com
Must be nice to be able to pay a top notch mechanic to install new brakes when the old ones are still like new. Lol. Great video.
Are you using ceramic or semi-metallic pads?
Have new wire clips that were supplied. I live in rust country and the old wire clip was rusted fast. I had to cut it off. New wire clip refuses to be installed.
just got yourself a new costumer thank you
+luis m jaramillo Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Anti seize on the studs?
Awesome thx
Hey just came here to find the bleed valve on the rear breaks and I have to ask why didn't you bleed the breaks for the rear ? I imagine you would of bleed them in the front or are the break lines for the passenger and driver side each their own ?
Didn’t bleed them because he didn’t open the brake line! No need to bleed unless you open an actual line!
What kind of grease do you use ?
no, I try that I live by the ocean, Washington State both Pad and plus front pin (RUST) Front pad
just fill out, that rubber fitting.
I had to rip it out.
My jeep is a 2001 V8 Grand Cherokee Unlimited With a greases fitting (milage 162233) bottom line my new left rear brake from 1A will be here tomorrow 4-4-22.
Like your video.
Just remember Murphy law
Bob
Me again 1A is the best; Am an old vet 1A Auto older than me (4-9-50) BD coming up.
NOT D day.
E Brake please.
Thank you
+Adam Layton Thank you!
Thanks
Would have been nice if you instructed the removal and reassembly of the drum brakes.
Anyone know what size Allen socket to remove caliper?
Popping off the 2 rubber caps reveals 2 pins which the caliper rides on. I believe the video mentions a T45 Torx bit, and that is what I used to remove mine, however, after struggling a bit to remove the Torx bit from the pin, I decided to check the size again and found out that mine are a 7mm Allen (hex) wrench size.
Thanks for that video I ask for doing that on 4 wheels and was 967dlls I will save about 500dlls
+salvador plascencia Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
What size torque wrench for the caliper screws?
+Hedley Lint The caliper bolts use a T45 bit. The torque wrench is up to you as long as it fits the bit you have. 1aauto.com
Nice video...but my mechanic doesn't own anti seize either :)
+chex313 Thanks for checking us out! 1AAuto.com
It this the same tool for a 2000
My emergency brake didn’t come back. Won’t engage. Have been cranking on it for 20 minutes. Any suggestions?
+Kc P We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@@1AAuto I’ll do that thanks. just watched your video on front brakes. Why are the back metric and the front sae?
Is it necessary to use brake cleaner? I'm genuinely curious
+Ashley Bellerose Thanks for watching! Brake rotors have a coating put on them from the factory that helps prevent them from rusting before they are sold to the customer. You will have to use brake cleaner to remove this coating, which is necessary to properly marry the brake pad material to the rotors! 1aauto.com
@@1AAuto thank you!
Someone. Please tell me what tool i need to. Get my brake pads change
So... apparently you guys don't bother replacing the drum brakes? Thanks for showing me the long way to do the normal pads. 👍
Devin DeCremer: Most people don't know that there are parking brake shoes inside the rotors.
They were taking the time to impart some information to folks who refer to rotors as drums ..
no torque specs for bolts/pins?? smh
Parking brake doesnt get used on auto transmission cars? Transmission is not a kickstand! Use the parking brake!
Nice tutorial, guys. But you should NOT lube the caliper bolts inside the boots - read the manual. Rear bolts are non-lubricated.
+Outmembered Thank you for the feedback! 1aauto.com
My park break is broken lol
how is this free