Nice informative vid Ade. You are defo on the right lines of NO lube. I have changed out all the bearings on my baitcasters and found they work better if you remove the orange shields. Give it a go and see what you think. Stay safe mate. 👍
I think you may be thinking of the Dark Wolf Ultra. This is the original DW DF50. It only had a Clip to retain the side plate bearing. Checkout @BFS FISHING CHANNEL where Peter Kim shows how to remove replace the tiny C Clip that holds the spool bearing in place🎣🎣
Thanks for sharing. I got the bits from Ali express and followed your video. I turned my spool the same time as you did and mine went for much longer. Not sure why?
Damnit can't get the bearing out of the god damn magnet cover. Got the little jumpy thingy out but the bearing it self ain't coming out. Can't push anything beneath the bearing to hook it up. Nothing fits under
The brakes are already bad with the original nmb bearings, with the ceramic ones the brakes will work completely closed... because the brakes don't handle it.
l.facebook.com/l.php?u=https%3A%2F%2Ffishingdiscoveries.com%2Froro-bearings%2F%3Ffbclid%3DIwAR1pNNTtSdkl2XIImiEsxRVSyyoRrXrG2uoI97szh52xuPrzVu0N6xPtljk&h=AT1cKgDRIX_uZu3rxjYHkGoJBzn_9YT0XKWPXKytvGl3m5WqFk7Ga7GAH0qXtmvi9WVT6qetBIkI_RvKRXDA5VoAYBJX-pcLX1XTpN92F78QSv7gL6lxrQo8BieOZLg&s=1 These aren’t the same bearings but are even better and they do bearings for the zephyr
@@TheConstantAngler i deleted my facebook a while ago haha but thanks anyway. Looking to buy a budget bfs like the zephyr (newest one has drag clicker too!) and then maybe upgrade it with the ceramics, shame the Curado bfs isn’t available in uk or I would have just bought that
Here you go read through this you will find towards the end fishingdiscoveries.com/kastking-zephyr/?fbclid=IwAR2w0-iEGQD0sUZ92zQJWKFIch8B41A1dQ_QL0UrtAgnPFYwyBGu8ELTbY8
I’m going to share with you and the readers how the smallest of items can reappear in the most unexpected of places. I am not making this up by the way. I had in the 1970s a Sony Walkman. It had a dust cover on one of the ports which when I removed it popped from my fingers into the lounge carpet? Sofa? Under the sofa, the fire ? ! After looking for two hours at my nana and gramps house which is where is where I was when I popped the cover, I gave up. Back at my flat at eleven pm, my nana phoned me up, “I found the dust cover”. Where I asked? “In my bra”!! It had flown into the air and landed in my nana’s blouse then got into her bra. Strange but true!!
Bearings 5x10x4 and 3x10x4
saiz bearing for spool?
5x10x4 Ronaldodin
thankyou bos..
My pleasure
the bearing also same size with tsunoriya dark wolf ultra kf50?
Nice informative vid Ade. You are defo on the right lines of NO lube. I have changed out all the bearings on my baitcasters and found they work better if you remove the orange shields. Give it a go and see what you think. Stay safe mate. 👍
Will do mate. I think I left some grease in the recess prob didn’t help.
Great video yet again
Suggest you pull and set the bearing retainer clip from the inside of a ziplock bag.
Great idea. If anybody is going to loose it I am.
I hope you can give the measurement of the bearings
Will try and obtain them by contacting supplier will try and get answers from my Facebook group BFS budget finesse fishing also
From what I have been told you need 5x10x4 and 3x10x4. Hope that helps. Thanks for your support
What about the c clip that's on the pin. On the spool thing before u put the bearing in it??
I think you may be thinking of the Dark Wolf Ultra. This is the original DW DF50. It only had a Clip to retain the side plate bearing. Checkout @BFS FISHING CHANNEL where Peter Kim shows how to remove replace the tiny C Clip that holds the spool bearing in place🎣🎣
@@TheConstantAngler yea saw his too ty brotha
Be interesting to see what difference it makes in an angling situation.
It allows you to cast a bit lighter lures.
When they lift lockdown I will give it a go. Fingers crossed.
@@danielkarlsson3734 I'm wondering how easily the reel will be to control.
This is what I’m thinking. Will the magnets be up to it?
@@TheConstantAngler Only one way to find out.
Hello dear, what is the minimum weight of the bait you can throw with it?
I’d say realistically 2gr but not far. It’s good with 3gr up to about 10gr
Thanks for sharing. I got the bits from Ali express and followed your video. I turned my spool the same time as you did and mine went for much longer. Not sure why?
Think mine are not that great. Might try some micro bearings? Glad it helped
Helo bos..what saiz for spool bearing
Damnit can't get the bearing out of the god damn magnet cover. Got the little jumpy thingy out but the bearing it self ain't coming out. Can't push anything beneath the bearing to hook it up. Nothing fits under
You need that little hook I was using to lever it out.
@@TheConstantAngler got it out barely haha. Thanks m8
Consulta sabe cuáles rodamientos usa el tsurinoya darck Wolf ultra kf50
5x10x4 and 3x10x4
5x10x4 and 3x10x4
5x10x4 and 3x10x4
The brakes are already bad with the original nmb bearings, with the ceramic ones the brakes will work completely closed... because the brakes don't handle it.
I’m finding it ok but with very light lures the brakes aren’t up to it. The DWU can handle lighter lures though.
Will it help to change magnets?
If you can find stronger magnets for the Dark Wolf DF50 then yes but the Dark Wolf Ultra can handle light lures
Hi, do you know the size of the crank hole? 8x5 or 7x4?
When you say the crank hole are you after bearing sizes or something else
will these bearings fit a zephyr bfs? in other words are the universal
I’m not sure. I run a Facebook group BFS Budget Finesse Fishing I will ask on there or if you would like to join and ask yourself feel free
l.facebook.com/l.php?u=https%3A%2F%2Ffishingdiscoveries.com%2Froro-bearings%2F%3Ffbclid%3DIwAR1pNNTtSdkl2XIImiEsxRVSyyoRrXrG2uoI97szh52xuPrzVu0N6xPtljk&h=AT1cKgDRIX_uZu3rxjYHkGoJBzn_9YT0XKWPXKytvGl3m5WqFk7Ga7GAH0qXtmvi9WVT6qetBIkI_RvKRXDA5VoAYBJX-pcLX1XTpN92F78QSv7gL6lxrQo8BieOZLg&s=1
These aren’t the same bearings but are even better and they do bearings for the zephyr
@@TheConstantAngler i deleted my facebook a while ago haha but thanks anyway. Looking to buy a budget bfs like the zephyr (newest one has drag clicker too!) and then maybe upgrade it with the ceramics, shame the Curado bfs isn’t available in uk or I would have just bought that
Curado looks great. I will ask in the group for you and get back to you.
Here you go read through this you will find towards the end fishingdiscoveries.com/kastking-zephyr/?fbclid=IwAR2w0-iEGQD0sUZ92zQJWKFIch8B41A1dQ_QL0UrtAgnPFYwyBGu8ELTbY8
Nice vid what braid have you got on there?
This stuff mate. ruclips.net/video/PqpAIznPmGk/видео.html
@@TheConstantAngler cheers mate
Where is you shopping to this Peilin?
www.needhamsst.com/product-page/hybrid-ceramic-bearing-upgrade-for-df-50-sf-50
How many size with this?
@@user-ok8kg4rz5f 1 of 5x10x4 and 1 of 3x10x4 hope that helps
Just order roro for one of my dark wolfs . Havnt been that impressed with the reel like everyone is . A little overated.
I’m going to share with you and the readers how the smallest of items can reappear in the most unexpected of places. I am not making this up by the way. I had in the 1970s a Sony Walkman. It had a dust cover on one of the ports which when I removed it popped from my fingers into the lounge carpet? Sofa? Under the sofa, the fire ? ! After looking for two hours at my nana and gramps house which is where is where I was when I popped the cover, I gave up. Back at my flat at eleven pm, my nana phoned me up, “I found the dust cover”. Where I asked? “In my bra”!! It had flown into the air and landed in my nana’s blouse then got into her bra. Strange but true!!
You couldn’t make that up. Great story