Honda CBR 600 buggy build part 8
HTML-код
- Опубликовано: 1 окт 2024
- check out go power sports for all your go kart needs
bit.ly/2sC3WLT
ratherBwelding merchandise
bit.ly/2PF21Vf
Follow me on Instagram www.instagram....
Go power sports parts I used in this video:
steering wheel
bit.ly/2XbidNe
steering knuckle
bit.ly/2URNdnS
go kart steering kit
bit.ly/2P6IwkA
5 point seat belt
bit.ly/2UPQqV5
Other parts I used in this video:
King Shocks 2.0 Emulsion Coil-Overs in 16" Travel with Springs PR2016-CONRS PAIR
ebay.to/2F9UE13
King Shock Coil-Overs 2.0 Emulsion in 14" Travel with Springs PR2014-CONRS PAIR
ebay.to/2F1XzHJ
JEGS 70250 Pro High Back II Race Seat
amzn.to/2Fa3DPI
JEGS 70280 Pro High Back II Vinyl Seat Cover
amzn.to/2TLTbWB
Barnes 4WD B4WK0116 - Panhard Bar Rod End Heim Joint Kit 3/4 x 3/4-16 CHROMOLY HMS 3/4-5/8
amzn.to/2O6niTK
Barnes 4WD B4WK0062 - Panhard Bar Kit 3/4 x 3/4-16 Econ Heim Joint Bungs for 1" ID Tube
amzn.to/2FcM8yp
CV axles
amzn.to/2BNALKf
s10 hubs
amzn.to/2EVISrg
sprocket
ebay.to/2BMMLf9
Music by Epidemic Sound (www.epidemicsou...)
Who else thinks this guy is absolute legend in everything he does.👍 if you would like him in your shed, doing the things that you don't want to.
More like an absolute UNIT
Could explain why his long travel independent rear suspension video has over 1.5 million views.
@Freerider Uh ok
Why'd i want him making stuff in my shed?? If i had the energi and resources id do this myself.
Omg thank lord ive been waiting for this video
me to
I also would like to see some more technical talk and your design process, generally more commentary on what, how and why youre doing it. Like for example why u choosed round tubes, which type of steel and how thick. It would help others with decisions with buildings their own projects.
Round looks lot cooler. Not looking so homemade. I think steel type doesnt matter something common. Stainless steel may be weaker than normal steel and you paint it anyways?, thickness... It may depend what kind of vehicle you building? How big how powerful motor or how hard use it is coming, big jumps? and you can always add some more pipes where you think it is too weak
Building yourself is the best because you can choose everything! :D
PHEEEWWW! Thought I was going to have to wait another week for my "rather B welding" fix!😁
Your Awesome Dude. Seems like you got a lot done. Glad I got to talk to you at the Pate’s swap meet. Can’t wait for more.
When I built my trike I called a company in in Dallas I can't remember the name but they build custom sprockets to anything you need might be worth looking into I could also try and find my old receipt book and give you the company name if you need
Would you mind shooting me the company name? I need sprockets for all sorts of custom stuff
sprocket specialists
One person I always watch, just getting off work so I can't say first but I'm present!!
Why not use a motorcycle trike gear box like a Harley Davidson because they have reverse.
microtruckerwg yes
Plenty of room for that new engine you picked up at the swap meet...... =)
I can't take it anymore 🤯! I want to see this thing shreding it up already!!!
Going down from a 14 to a 13 on the front is a huge jump up. You should put that on.
Jk but i thought it'd be funny to hav a back seat driver lol ride backward on the motor with a chaingard
I’m glad I’ve found this late , I can watch the whole series 😁
Look up bms power buggy gear box! My dad built a cbr600 buggy and used its stock gear box it’s perfect for what you need
Have you looked at the RPM gearbox? Very expensive though maybe have to look used.
You should also make a bar to protect your rearwheels from catching trees
Right on. He'll be glad he did after the first glancing blow cuz it won't take much to knock all that hard work out of alignment.
Just get a small car engine and you're good to go. No reverse gearbox bs to deal with and more power and torque than that tiny 600cc. You gonna have to redesign the rear end but oh well. It's worth it.
Most small cars dont have a lsd transmission so he could still run the same rear setup, I have seen people run sprockets instead of a CV shaft.
Yeah I have been waiting for this lol
How do you want to tighten the chain?
You need some oblong holes on the engine mount or on the rear axle. The chain will get longer if you drive the buggy.
Your Vids are great,
greeting from Germany
Springloaded roller under is one option. Works as a chain guide too.
Bro this is by far the most interesting build I've seen anyone doing in a long time! I have some super awesome build ideas ill be working on soon myself. I think it would be awesome to do a collab with you on a project, could be fun...
Yo... Give Grind Hard Plumbing Co.'s channel a visit, you won't be disappointed.
Is it me or does the frame look a little to big for that engine
I thought that in red beards gear reduction video on his gearbox he Sed that rather be welding brought one as well.
Ya quiero verlo funcionar ¿para cuando??????
Seat on the top: " Hey buddy, where's the roll cage for the top? " ..." Na mate, your face is the roll cage..."
Goldwings have reverse. Find a junk one!!!!
Electric reverse. Junkyard starter motor. You can use a one-way bearing on the sprocket so the electric motor doesn’t spin when driving forward. Mount it adjustable to act as the chain tensioner.
He tried that on the 2 speed kart with a 4000 Ib winch and it didn't work. although with some design changes it might be worth another shot.
electric reverse in theory sounds good but in real world sucks. In order to have a motor big enough that it's not slow and under powered you might as well build an electric powered buggy.
That seat might work If you whunt to view the morning/ night sky. Or pullover and eat
I think the pullover might be too much in a sunny day...
Couldnt you use the reverse gearbox setup from a Maxxam 150 2r or the Trailmaster 300 on a jackshaft?
Is there a way you could highlight the wiring? I'm not good with it..but I've got a 600rr..mangled harness..kinda just would enjoy a simple video on how you wired it up sir!! 🤘🤙👍
1 view 10 likes... seems logical
Fernando Gomez people not signed in I’m pretty sure
You need more power, the weight of that pig at least 150hp and 100 ft/lb. of torque
Harley-Davidson makes a reverse gearbox for there Trike motorcycles you might could get one of a wrecked motorcycle like that
Power wise it should hold up I dont think it will handle the rpms
you should build a rotary buggy manual trans or a rx 8 auto trans bc paddle shifters
that would be sick, and extremely involved haha
yea you can rebuild a rx 8 engine for $800 and you can find a 40,000mile motor with trans for $1200
@@Ben-rm9jx ...time to hit up craigslist
Welp i thought i would just skip to his newest video to watch it drive..... guess im SOL 🤦♂️
This project is completely bad ass honestly. ..and I was watching and wanted to mention something about the rearend suspension set up. You could have possibly saved some joints and weight if you had copied the VW Bug rear suspension....you may have already considered that option back in the beginning but I can't help but think it's tried and true it does work and it works well.. but it's not my project and I'm not going to tell you how to build your projects especially since they end up just fine without my ideas lol just thought I would throw this out there. Maybe an idea for another time anyways awsome build and keep the vids. Coming
I like these comments though. For a beginner like myself any input will be appreciated.
Just watched all the videos back to back. Where did you get the talent? Ive built some mini buggies in the past and can relate to the stress of solving problems. Great job!
Nice job man! Looks great! =)
1:05 the drift trike in the left button corner :)
No thats the red race scooter
What kind of diff are you using? I am looking for a project of mine
Chain worn's out quicker, the smaller the front sprocket goes. I'd suggest one 'gearing-recucing shaft' between front and rear sprocket :)
good job you did a lot i have a gearbox just let me know it is nice it has high low and reverse
put the seat at the back like if u think he should
Im shur go power sports has the forward reverse tranny , i think i seen one there, the gear box is like 159 and the complete kit gear box cables and shifter and all hardwhare 199 . Now do they have it in stock , not shur but its on thier site . Under go karts ( reverse ) ..... good luck and keep up the build doing a great job man .
Try and find a Polaris RXL 650 EFI triple, that engine stock makes 108hp and if you get triple SLP or PSI pipes for it you would make just under 130hp so that’s definitely enough power especially because that engine will have a CVT on it
*BTW it’s a 2-Stroke so I’m sure people would really like that😂*
You know many Talented tricks at work.
It is understood that you will be learning it very hard.My congratulations on the cars you build.These are all like parts of the car of my dreams.
Find?Find?Find a sprocket? Rather B come on man, I happen to know, for a fact, that you have the ability to make one. However many teeth you want.
#Watch out Pincher, Rather B rippin in a BAD ASS buggy, is comin for ya! Keep it up. I love watching.
That is really going to rip.Perhaps you can put adjustment rails under the drivers seat because others are going to drive that.You know that'll happen.LoL.Best if they reach the brakes.
I would put some gussets underneath your rear carrier tube... There's not a lot of structure keeping it from swaying left and right *(yet)...... If you snag your rear tire on something hard (and you will).... It could pull your entire rear carrier assembly with it... bending it to one side, off center... More gussets are your friend on this one, especially around your drive train components. It's gonna have more power than you think. Even if it's not super fast off the very start... it's still gonna pull from a rolling 20mph to 75mph very intensely... These motors scream well above 10k rpms... and they bring power all the way to peak rpms.... Make sure you get a good helmet, this thing is gonna be way faster than you want to deal with. I know, because I turned a CBR600 into a 4wheeler.. and it was nuts. Pretty sure I had like a 53 tooth rear, and maybe 14 front........ Worse case scenario, you can end up running a jack shaft and get your gear reduction even further if needed, later.
I made this point due to looking at you sitting on the rear end...at the end. The springs did not sag. If you move the springs vertical. it will be even less compression. I think your springs are way to big.
Im waiting for new part of this build more than for new GoT episode D: ;
Please get yourself a higher lift floor Jack! Dont hurt yourself. HFT for less than $100.
I am loving this build! Alibaba is for Wholesalers. Try Aliexpress.com for the FNR box
Hey I am currently building a buggy with a cbr 900rr and i am looking for a reverse gearbox too. You said in your video that you would have to buy 2 of them, maybe if you don't have any other option I could buy you the other one. I am from canada too (quebec exactly) let me know if your interest. PS; your videos are awsome!
Make your own reverse gearbox, similar to your 2 spd.
a set of meshing gears on one side, a chain & sprocket drive on the other.
Seal it in a simple rectangular aluminum box.
He more or less has one, just not fully completed yet
How are you going to tighten the chain when it stretches. You will need a solid chain tensioner not a spring loaded one. For the sprockets, have you looked at both 520 and 530 chain sizes? Motorcycle-superstore.com, cyclegear.com, revzilla.com, motomummy.com, ftdcustoms.com, tobefast.com. The are many more sites, but these are what I could think of with ease. Good luck, Rob.
awesome build
Have you shopped JT sprockets site yet? you may have to do a jackshaft to get the right ratio which I'd think would need to be around 5.5 or 6 to 1
ahh you'll get it in the end just keep plugging away at it.
Great vid! I just put gsxr 600 on my cart thats just little smaller then urs im running a 16t countershaft and a 28t rear sprocket cuz it's wat was on the go-cart but I will gear it down u have to clutch it in 1st to take off but it tops out 70-80mph in 1st gear it just roast the tires off on dirt so with ur gearing set up u will prolly be bout right and will have all the power u need that motor should be around 90-100hp
-1 tooth from the front is equivalent to adding two on the rear. you do have a lot of gear reduction there already though.
This is 100 times better than those guys buying wrecked supercars then ordering every part online and assembling them with minor work done. But those ones seem to be the thing at the moment so, when you finish the buggy build maybe do something like a supercar rebuild. For the views, some funding and then you can do stuff like this without many limitations. Just a thought.
Have you tried aliexpress for your gear box? The same company as Alibaba but they sell single units of the things that are on Alibaba. Also if they are not on aliexpress just email the company that makes them asking them nicely if you can purchase one unit for testing purposes and tell them you are willing to pay a bit extra (if you are that is) I have tried this a number of times and it has worked.
Ask that company about getting a "business sample". My dad would call companies up chat with them and he got all kinds of stuff free as business samples. Just call them up sugarcoat them and you may get what you need. If they think they may have a customer base through you they may fall in line.
gotta check out alliexpress which is albaba little sister and its where you buy things that you dont need in bulk.
If you can find it on Alibaba, but they don't do small orders, check out Aliexpress, it's more the consumer level site, instead of the business level.
Fellow fabricator here. Might want to sand the mill scale off your rotors will prob load up your pads like how it loads up sand paper fairly fast. cool videos oh and the shocks in the back prob do need to be more vertical it takes away from its actual range and dampening ability also I’m fairly positive the motor will be fine it will rip and if you need torque 1st is short anyway
There is another company out of Australia called the edge products. They have a perfect forward reverse gear box and they call it the CV2 rear end. You can buy plans to build it yourself or you can buy the gearbox on their site theedgeproducts.com
Afraid the sprocket is way to large.The wheels are smaller than the wheels on a bike and the sprocket is larger. You won't need the first 3 gears....
A big three cylinder Rotax snowmobile engine would be nice on that sucker, or I'm thinking it would.
Sick vid
If you keep that chain that tight you will rip it apart , it will need between 2 and 3 centimeters of play . Not only the chain wil get damaged also the bearing on the front sprocket cant cope with that strength if you dont give the chain more slack. Also when the chain is to tight , shifting will be more dificult
Do you plan on keeping this and making alot of videos riding it and testing it?
Save yourself the time money and your sanity Alibaba is a scam.... Some Alibaba sites are okay but most of them are scams.....
How do you tighten up the chain when its starting to slack? Have you thought on something for it? Or have I simply missed it in your videos?
eamal jayid 'ahsant hal aintahayat min aleamal biha wajurbatiha eali alwaqie 'ana eamilat mithlaha walakn 'ueani min aldisk walkultish
Have machinist make the 10 tooth
seen sime quads that have a forward reverse gearbox mounted seperate one thing i jnow for sure we have small light cars here that people can drive with only a moped licence , these have the type of gearbox you want , but there made in europe
static.mijnwebwinkel.nl/winkel/brommobieldelen/image/cache/article/9eb03403a1e4dc67f695896838a35bdca2441ac2.jpg
they even have a diff in them , not realy strong though , they break them often
Brake disk was out of round hopefully the doesnt cause excessive shaking
I feel like 600cc isn’t going to be that much for this big ass kart. Should have got at least a 1000cc
Use a cheap high torque cordless drill to provide reverse. Use a tiny gear and a neutral interlock.
Bump steer is ok. It will make the steering more aggressive and turn harder. It depends on off power and on power. Having rear toe in the rear end is ok most of us run 3 degrees on our rc cars it helps the car square up faster on power
How are you planning to adjust the chain tension?
If you lay the shocks down some it will soften the suspension. If you stand them up it will stiffen it up.
see if u can find the gearbox that is on alibaba on aliexpress as they are linked alibaba is more for wholesale and aliexpress is morelikely to sell them singularly
I'm sure you could just make your own sprocket. you got the tools to make a sprocket so why don't you just make one?
That back end still looks funky. Were you gonna change it or leave it?
Lebih banyak crita. Dari pada krja, kapan siapnya Mr BB.
As for the gear talk to this old Tony..or Abomb79 either one should be able to help you out.
You r cool .... I was waiting for this part
To get more power out of the 600 you should turbo it
The rear drive chain just noticed there is no adjustment for it considering the weight of the vehicle thinking the chain is going to need something in there.
Approximately how much will it cost me to build one like this?
Enjoying this series. Looking good
You need a bigger motor man that 600 isn’t gonna do much but put around and burn clutches
Yamaha R1 engine will be enough in those
I though u never finish smh ughh I hope yo nex vid ain't 7 months apart lmao
Get the 900cc ducati engine from cars and camera's
Why 2 extra feet of headroom over the seat top. Why so massive body and small tires
You could get a sprocket laser cut thin taper the side yourself
Mate I know loads have folk have already made this point but, lokkingxst the size of it now, I'm pretty sure you're going to need s much stronger engine..
If you say on top then I'd be worried about it rolling over
You could add a Jackshaft to get some lower gearing. I would only do that if its way to high as it is. It's close to 100hp. Im sure it will move LOL.
And like 50ft lbs of torque...
An LS with a Porsche trans axle will fit👀👀