firstly its too informative and thank you for sharing such a video and can you please share the link for pyrolysis of biomass cotton stalk focus on bio oil for single particle modelling is will help me a lot
Hello thanks alot for your effort. What about the char you didn't mention anything about it, and I tried to simulate but the error appears due to char missed data and you mentioned it as outlet stream. Thanks
subscribed!!!! This is beyond amazing. I have sent you an email but forgot to mention the Rstoic calc excel sheet. A quick one pls, how do we incorporate pretreatment, drying and catalyst addition to the process? Thanks
Thanks for your comment! I have a video about the drying of biomass, see ruclips.net/video/3wg6Ach-92k/видео.html . I hope the video helps. Unfortunately, I cannot help with the issues of pretreatment and catalyst addition at the moment.
I varied the stoichiometries until I got to the composition from experimental work based paper ==> An iterative process. I found the paper in www.sciencedirect.com. Unfortunately I don't remember which one it was.
Please is it possible to incorporate a reactor and a fluidized bed model together so as to get a fluidized bed reactor for Pyrolysis? If so, how do I go about it
Buenas noches Estoy en un proyecto para la pirolisis de la biomasa de la yuca en aspen plus. Ya tengo la caracterizacion de la biomasa, pero necesito informacion cinetica y l estequimetria de las reacciones, si me suscribo al canal me podria ayudar a entender la estequiometria de la biomasa?
thank you for many beneficial videos. I have sent an email to ask you for more information about how to simulate pyrolysis process. Please, help me to do this project. Thanks
@@kgengineeringsolutions Hi ,Thank you very much for the videos there are really helpfull. Can you please simulate a case of lignocellulosic biomass bioethanol production considering steam explosion pretreatment
From where did you find the reactions for the biomass (more specifically stoichiometry coefficient) ?
firstly its too informative and thank you for sharing such a video and can you please share the link for pyrolysis of biomass cotton stalk focus on bio oil for single particle modelling is will help me a lot
You're welcome.
Please send me your email address.
From where did you get the stoichiometry equations?
Thank you so much for this tutorial. Please make more tutorials about pyrolysis simulation.
Excellent video. Could you please explain the method you employed to obtain the stoichiometric coefficients?
Hello can you send me the link or info on where you find the stoichio and percent conversions? Thank you!
Unfortunately, I have no source for the data.
Hello thanks alot for your effort. What about the char you didn't mention anything about it, and I tried to simulate but the error appears due to char missed data and you mentioned it as outlet stream.
Thanks
You're welcome.
Do you mean where I got the data I entered from 18:17?
Hi, the same for me. When I run the simulation, char data is missed. How did you include it?
@@NicolasClauser See the video from 18:17
@9:00 WOULD YOu please tell me how you defined organic value in SULFANAL?
I made an assumption
subscribed!!!! This is beyond amazing. I have sent you an email but forgot to mention the Rstoic calc excel sheet. A quick one pls, how do we incorporate pretreatment, drying and catalyst addition to the process? Thanks
Thanks for your comment! I have a video about the drying of biomass, see ruclips.net/video/3wg6Ach-92k/видео.html . I hope the video helps.
Unfortunately, I cannot help with the issues of pretreatment and catalyst addition at the moment.
On what literature you rely on to certify the assumed oil data? is there a reference for the stoichiometrics too?
I varied the stoichiometries until I got to the composition from experimental work based paper ==> An iterative process. I found the paper in www.sciencedirect.com. Unfortunately I don't remember which one it was.
How to calculate organic value of biomass
Please is it possible to incorporate a reactor and a fluidized bed model together so as to get a fluidized bed reactor for Pyrolysis? If so, how do I go about it
Hi, ruclips.net/video/fScvfrZVv2U/видео.html and ruclips.net/video/YHWw5xN95SA/видео.html could help you
Thanks for this video. Can this process be applied to any biomass, at least if we know the composition of biomass?
You're welcome. You must know the composition of the products.
Could you please explain how do you calculate fractional conversion?
The ultimate / proximate analysis, how we can get these results experimentally. Any video or literature to share related to this. ?
This book contains information that may help onlinelibrary.wiley.com/doi/book/10.1002/9781119037699
Is the software available for download or sell i have checked the site but no any lucky?
I need to see the output
Nice tutorial. Can you please mention the article name from which you have gathered numeric-data?
Thanks:-) See DOI: 10.1016 / j.biombioe.2018.11.019
Can you tell me which reascher paper you used for simulatiin?
The approach is based on no paper.
Buenas noches
Estoy en un proyecto para la pirolisis de la biomasa de la yuca en aspen plus. Ya tengo la caracterizacion de la biomasa, pero necesito informacion cinetica y l estequimetria de las reacciones, si me suscribo al canal me podria ayudar a entender la estequiometria de la biomasa?
Te respondió algo?
Thanks a lot, please can u make a video of cotton stalk gasification to get syngas..
Please if u find a dats regarding cotton stalk to syngas by gasification , please do a video.
Tank you for the comments. See this video ruclips.net/video/mQIrTbXosUk/видео.html
It might help, if not write me please.
Hi, thanks for uploading the video! Can you let me know where did you get the fractional conversion data from?
Please send me an email and I will send you an Excel sheet where you can follow the procedure.
@@kgengineeringsolutions That would be really nice! I just sent you an email.
@@xxx4651 hey pals, do you got reply from this channel? can i get the excel from you?
@@xxx4651 hi, sorry can you send me the excel file too? I already sent an email to the channel owner but no response :(
@@dewi-lx4ig yes, but I need your email
thank you for many beneficial videos. I have sent an email to ask you for more information about how to simulate pyrolysis process. Please, help me to do this project. Thanks
Thanks for this. Subscribed!
Thanks
How did you determine fractional conversion?
Send me an email and I will send you an additional file.
@@kgengineeringsolutions (alpha_0 - alpha_t)/(alpha_0 -alpha_r) This is what know
How did you calculate the stoichiometric coefficient for the reaction?
It is difficult to describe the procedure here. Please send me an email and I will send you an Excel sheet where you can follow the procedure.
@@kgengineeringsolutions I have sent an email to you since I would like to have the excel sheet to understand the procedure. Thank you so much.
Did u get the excel sheet?
Hi, Thanks for the video. Can you simulate a simple case of biomass gasification and add a video?
You're welcome. I'll try to make the video by the end of next week.
@@kgengineeringsolutions Hi ,Thank you very much for the videos there are really helpfull. Can you please simulate a case of lignocellulosic biomass bioethanol production considering steam explosion pretreatment
@@ayandasiphumelele2671 You're welcome.
Do you have literature about the process?
@@kgengineeringsolutions Yes I have done and Im still on it thanks
Solid biomass possible in Aspen Plus ?
yes possible
Whats the product of this process? Bio oil? Char? Hydrogen etc? Thanks
Char, bio oil, pyrolysis gas
Thank you very much!🙂
You're welcome:-)
👍