Leaky Transmission? Powerglide Gasket Kit Install | Nova Transmission Upgrades Part 2

Поделиться
HTML-код
  • Опубликовано: 16 сен 2024
  • This time on SPPTV Rob continues working on the Nova's Powerglide transmission. Leaks are bad in all cases but particularly dangerous when dealing with drag racing. Last episode Rob built a transmission fluid catch can, and in this episode a transmission seal kit is put in. Hopefully eliminating any leaks or potential leaks in the future.
    Check our previous videos for tons more of Rob's Nova including videos of it running 9s at the track.

Комментарии • 25

  • @scottmccambley764
    @scottmccambley764 2 года назад +2

    Awesome yur back! For a while there I thought Covid got Mike and the rest of you didn't want to pay the internet bill :)

  • @jasonhastings5538
    @jasonhastings5538 2 года назад

    Glad to see you guys posting again!!

  • @silveradoss7560
    @silveradoss7560 2 года назад

    happy to have you guys back.

  • @JustinSpenst
    @JustinSpenst 2 года назад

    Back to back videos 😮 awesome to see some content again!

  • @gkanderson92
    @gkanderson92 2 года назад

    Happy to see you guys again. Been away too long.

  • @wisdomSP
    @wisdomSP 2 года назад

    Glad to see you are doing well. I hope you have a great rest of the year!

  • @sanderscharley
    @sanderscharley 2 года назад

    I missed you guys. Great videos.

  • @hookshotrods7161
    @hookshotrods7161 2 года назад

    good to see your back

  • @6xcchamber971
    @6xcchamber971 Месяц назад

    I have a powerglide trans for my 5.3 and when I move the torque converter around the insides rattle a little. I flushed it out using gas and a air hose gun. Do you think it would be alright and would it be alright to just get the car on the road and then have a good converter built after I put the turbo on it?
    Any help from RUclipsrs would be appreciated?????
    Thank you!

  • @froglegs6384
    @froglegs6384 2 года назад

    Hello i saw you didn't put your manual valve back on the shifter lever.

    • @SPPTVarmy
      @SPPTVarmy  2 года назад

      I wish you would have seen that before I put the trans in the car 😄

  • @danvinette2424
    @danvinette2424 2 года назад

    Missed you guys!

  • @boostedKTM
    @boostedKTM 2 года назад

    Good to have you back my dude

  • @dubCanuck1
    @dubCanuck1 2 года назад

    On the bench, you can get some leftover laminate flooring and glue that down to your ply with a few dabs of PL400. Lasrs a while and is replaceable.

  • @michaelparker9445
    @michaelparker9445 2 года назад

    Missed you guys

  • @charlesgalea69
    @charlesgalea69 2 года назад

    Thanks for the video guys.👌

  • @raycut8
    @raycut8 2 года назад +1

    Galvanized sheet metal for the bench top

  • @rontwigger6706
    @rontwigger6706 2 года назад

    Well done lads, hopefully you’re back for a while. Cheers

  • @terrypickette118
    @terrypickette118 2 года назад

    - 👍 👍 🔧

  • @19815389
    @19815389 2 года назад

    Who ever did the ultra bell did a nice job

  • @timwickersham869
    @timwickersham869 2 года назад

    Been a while since I seen a video from you guys?? Don't do plywood man,,,,go to a home remodel place of some kind,,,and ask to see the scratch and dent section,,,or anything marked down,,, put kitchen countertops on it,,,you can cut the back splash off of it and move it closer to the front edge if needed...🤓🤘🍺🍕

  • @bergawitz2555
    @bergawitz2555 2 года назад

    Just curious, how many quarts of fluid does it take ?

  • @alfredodirks3537
    @alfredodirks3537 2 года назад

    defiantly a old saved up video that was never posted. I hope everything is good and everyone is healthy now things are getting posted again.

  • @stevenayala2324
    @stevenayala2324 2 года назад

    I hope it dont leak but in case it does use 3m yellow glue from any auto parts store there the speedo cable gose learn that from a tranny builder on yt Precision Transmission ! Get that nova back on the road Rob!