I have a few others- (biggest) yeah they upgraded the carbon fiber barrel tip but how are you going to go from a 2 piece barrel to 3?!? Tool-less but casing around the board has to come off to access the board and more likely to get water inside. Milling seems like 3 steps backwards and it just looks like the top of an lv combined with the front of a cs2. Not a huge fan of the new OLED screen either or bolt
Ya I was expecting a rechargeable battery by now also that stairs/slope milling around the bolt why can't they just get rid of that design already hell switch from the ego7 design and the LVR design just get rid of the ego 8 look already
Nice if the tests actually included it being shot at a static target from a clamped position carefully seeing how accurate it is kicking the paintballs out, much like zeroing a rifle. Even better someone kitting up as a human target seeing how many hits can be achieved in a set number of meter dash between bunkers or directly away. Always good reviews by Tony but can never see the point of just letting off hopper after hopped at the timber the other side of the yard.
@@JG-oj9jz If I were in the US I would do the run for it. From My experience the better the quality of the paintballs and a decent marker and barrel they go pretty close to target even if not being fired by the best and fastest player.
When it comes to reviewing guns....just please let Tony do it if anything just add a person but Tony stays, he just keeps u interested and enthusiastic not boring.....a Planet Eclipse review differences on like LV2 VS GEO 4 VS CS2 PRO VS ETHA 3 would be awsome !!!
I just got a lv1 and it was $450 my cost ... would i spend another $1150 for missing an AT pipe. No thanks I'd rather make a few extra car payments. But awesome vid!
You can use any barrel that is Autococker threaded on the LV markers. Tips and backs from the Shaft FL system just aren't compatible with Tips, Backs and Inserts from the new S63 system
While I love PE guns, love the engineering and manufacturing, it seems like buying a new phone every year just to get two new emojis and a new cutezi-wootzi selfie filter for a phone that doesn't call or text any better then ones before it. But if you have the money or a sponsor is buying it, then by all means, fill yer boots!
A bit more thought and understanding needs to be applied to understand that decision. If you do that, it's actually a wonderfully simple, robust solution that keeps part/seal count to a minimum, bypasses the traditional complexity of internally plumbing dual regulated stacked tube markers, all of which helps to keep the body height at a minimum. The packaging that PE decided on with the LV2 was also smart - minimal seal count addition (which are their huge, robust gaskets) and no height gain to the body (which is why the LP hose is still in place).
Nice comparison. I'm not in an hurry to upgrade from my lv1.6 but might next year.
Same, I love it better than the 2.0
I'll definitely be interested if they ever make a full purple body or full teal. I've always loved my ego line and would gladly add another:)
These guys are the best for videos. Exactly what I was looking for smile 😊
Got the 1.6, same color as in the vid..j like it, ill keep it...
the lv2 is no better, don't fret
@@ConTheDon187 agreed
Need an efficiency test asap
1400 on 68/45
Both great guns, if you can afford the LV2 then go for it! If you wanna get a super reliable great performer, buy a 1.6 for 750-800 and go mow faces
would love to have comparsion CS2 Pro and LV2.
Master piece
welcome back Mark
ONLY gripe, and I do mean only, is its still a 9v but I've been waiting for sooo long
I have a few others- (biggest) yeah they upgraded the carbon fiber barrel tip but how are you going to go from a 2 piece barrel to 3?!? Tool-less but casing around the board has to come off to access the board and more likely to get water inside. Milling seems like 3 steps backwards and it just looks like the top of an lv combined with the front of a cs2. Not a huge fan of the new OLED screen either or bolt
Ya I was expecting a rechargeable battery by now also that stairs/slope milling around the bolt why can't they just get rid of that design already hell switch from the ego7 design and the LVR design just get rid of the ego 8 look already
we need a video with both markers shooting
Dammit Joe !
that guy!!!
I like the freak tip most
Nice if the tests actually included it being shot at a static target from a clamped position carefully seeing how accurate it is kicking the paintballs out, much like zeroing a rifle. Even better someone kitting up as a human target seeing how many hits can be achieved in a set number of meter dash between bunkers or directly away. Always good reviews by Tony but can never see the point of just letting off hopper after hopped at the timber the other side of the yard.
its easy to explain why u dont do that, cause that are paintballs not projectiles..
You should be that human target that they can shoot at
@@JG-oj9jz If I were in the US I would do the run for it. From My experience the better the quality of the paintballs and a decent marker and barrel they go pretty close to target even if not being fired by the best and fastest player.
That makes sense re a clamped marker
@@just9911 Thanks for that great advice. Yes must be difficult being a large dude and xxl gloves
Need to compare how both feel when fired
When it comes to reviewing guns....just please let Tony do it if anything just add a person but Tony stays, he just keeps u interested and enthusiastic not boring.....a Planet Eclipse review differences on like LV2 VS GEO 4 VS CS2 PRO VS ETHA 3 would be awsome !!!
….. me watching this knowing I’ll never buy it 😂😂
Same lol
Lol I’m actually watching because I’m buying 1.6 tomorrow
I'll be sticking with my 1.6. I'd rather use the money to get a geo4 or cs2 pro
I’ve owned a CS2 and my 1.6 shoots a lot smoother. However I have not compared it to a Geo4.
so PE decided the Freak system was the best??? Glad they came up with it...not! Love my o6 Ego though still rocking strong. Testament to PE quality.
I just got a lv1 and it was $450 my cost ... would i spend another $1150 for missing an AT pipe. No thanks I'd rather make a few extra car payments.
But awesome vid!
When are they going to release more inserts for that barrel kit?
What flew out of your hand at 7:30?
Had to replay this part back at 0.25x speed, looks like it was a dandelion blown from the camera man’s side. 😅
1.6 all day
Lv 1.6 looks so much better. Lv 2 milling is underwhelming for 1600 dollars...
Done on purpose for future releases. Can't imagine they'd be able to offer much performance increases other than shaving weight off.
Agreed but done on purpose
Boy Hating because he can’t afford one😂
Can you telll me more about lv2 and lv 1.6 dropping comparison i love the lv 1.6 ball droping and im not sure if lv2 has it too .
Yes. Its a stacked tube poppet so it looks as if the balls dropping off compared to a single tube
Is there a difference in the size of hand grip?
Hey do you guys have any extra eye covers for the 1.6 for sell
Hey guys are the lv1 lv1.5 and lv1.6 bolts the same
The new bolt will fit the older levels btw.
Can we still use our old barrel insert and barrel tips if we get rid of the new s63 barrel ?
You can use any barrel that is Autococker threaded on the LV markers. Tips and backs from the Shaft FL system just aren't compatible with Tips, Backs and Inserts from the new S63 system
Do the lv1.6 and lv2 uses the same solenoid ?
Are the barrels 14.5” or 14”? Jw
Shooting comparison
Backs too long for me, im use to putting the back near my lense to aim
but they both shoot. they are both efficient. both are high end. there is very little noticeable shooting difference .
Exactly, same with any high markers, there really isn't anything game changing but the prices.
You have to take the back grips off to get to the eyes oh hell nah
While I love PE guns, love the engineering and manufacturing, it seems like buying a new phone every year just to get two new emojis and a new cutezi-wootzi selfie filter for a phone that doesn't call or text any better then ones before it. But if you have the money or a sponsor is buying it, then by all means, fill yer boots!
Why so much for a pop it gun
Lv2 vs Geo4
im sorry but the dude behind the camera is sooooooo annoying he wont shut up
😂
No shooting video wtf
It's coming next! We wanted to re-do the overview since the one we posted yesterday had to be shot on the fly
Impatient much. Relax mahu
nevermind lol looks good.
Always thought that air hose coming from the trigger guard was a ridiculous afterthought.
still better than macroline dude!
A bit more thought and understanding needs to be applied to understand that decision. If you do that, it's actually a wonderfully simple, robust solution that keeps part/seal count to a minimum, bypasses the traditional complexity of internally plumbing dual regulated stacked tube markers, all of which helps to keep the body height at a minimum. The packaging that PE decided on with the LV2 was also smart - minimal seal count addition (which are their huge, robust gaskets) and no height gain to the body (which is why the LP hose is still in place).
But it works
it's not an afterthought, it's literally integrated into the design of the gun....
1.6 looks nicer. LV2 needs more milling
Oh just wait till they start trying to sell you the 2.1, 2.2 etc 😅
@@corwinclark8164 that is what I am going to wait for
First
I mean you couldn’t just take off the marker tags… just throw them in the case when you sell it tf