Even if perfectly balanced so it can reach high rpm, its built well and it's given the least resistance possible, it can still explode if sped up fast enough like a shrapnel bomb
@@MKgumba The SlowMoGuys covered the phenomenon of when circular objects are spun too fast. Look up "CD Shattering at 170,000FPS". Granted the CD was plastic and the fidget spinner is metal, but it can still explode; it would just take an insane RPM to do so.
@@MKgumba it may be out of reach to achieve a speed that would make steel explode in current times, I agree, but never know if there'll be a RUclips video doing that in the future someday.
Now that was quite an interesting spin. All of that ‘G-force’ on a hand especially when metallic can get out of hand any moment (especially if it’s a circle fidget spinner). Nice design.
And then you realized a second too late that you did not attach the razor blades perfectly and it launched at a very high speed slicing through your body
Yeah no, this is not over 100k rip ems. Never ever in a million years. The laser measurement thing is clearly just timing the holes going by, and since there are 7 holes, its readings are going to be off by a factor of 7 as well. But we have a better way of figuring out the actual spin rate. If you look at the waveform of the sound at 2:00, it takes 15 samples for one full oscillation. 15 samples at 44.1 kHz works out to 2940 Hz, which is the noise created by a 6-ball bearing, so you divide that by 6 to get the spin rate of the entire thing, which is 490 HZ, or 29'400 RPM. Which is still quite impressive so I don't see why you would lie about it, but then I'm not a clickbait youtuber so what do I know.
Thundercunt McGeezax see thats what I was thinking but I'm not sure anymore. he's obviously aiming it directly at the side, you can see the red dot. and usually u use a reflective point as reference that you stick on or something.
Superglue is fucking strong, plus the hole size is close enough to the bearing's size where I'm sure it would friction fit in, and the glue is probably for security just in case, and steel bearings have been known to stand 80,000+ rpm with no reinforcement so imagine what it's like with the reinforcement of half an inch of steel, which is reinforced by another half inch attached with 7 steel beams.
I'm pretty sure it goes a little bit a above 100k, the acceleration of that thing probably peaked above 100k rpm, i mean that thing accelerated faster than any car on the road.
@@luciengrondin5802 Like a helicopter I guess a fast one. (Helicopter blades are rotating and for safety reasons the rotation has to be no more than the speed of sound). This is why helicopters can't go really fast. Their top speed is a fraction of the blades rotation speed.
Edin743 No it wouldn't, Mph, kph would be used to go to place A, B, C, and etc. Spinning is specifically for RPM. MPH can be used, but it's impractical, if you're measuring from the exact center, it's going 0 mph, if it's on the outside, whatever mph it is since it's a rounded object.
Edin743 RPM is rotations per minute, it measures from the center to the edge, making it more reliable than a point wherever on the spinner. Conclusion, RPM is better for a fidget spinner. Just common sense.
That tachometer is likely giving a falsely high RPM reading. It likely shows greater than 99,000 RPM, because of the holes drilled into the fidget spinner. Tachometers look for patterns that indicate each rotation. The tachometer probably "thinks" each hole in the spinner is another rotation. However, each hole is only ~1/7 a rotation, so it is likely reading 7 times too fast. That spinner sounded and looked fast, but not >99,999 RPM fast. The best way to test this would be to put one single piece of black tape or a single mark from a black marker on the side and take the reading from there.
You can tell from the frequency of sound from the compressed air. Every audio oscillation is the sound of a hole passing in front of the air stream. This happens to be ~3.1kHz. 3.1kHz means (3100 holes / 1 second) * (60 seconds / 1 minute) * (1 revolution / 6 holes) = 31,000 rpm. 'Murica.
There's actually not a lot of power in these things. Machine shop workers do this stuff all the time with the air compressor. You could just grab it and stop it instantly like the toy that it is.
I am a machinist and the inaccurate offset of the holes upsets me. He should invest in a rotary table for his mill if he often does bolt hole patterns, it makes life easy.
He already has the mill why not have something he can do bolt hole patterns with. He can make a lot of other things besides fidget spinners that require symmetrical or precisely offset holes going around a axis on one of those, well worth the investment.
On my Instagram I post stuff that don't make it to video. Like the spinner in water and stuff...
instagram.com/giacowhatever
Good vid!!!!
How do you drill the outside holes with such precision?
Dávid Tóth pure skill
Giaco Whatever what bearing was that??
Was this made from aluminum?
now in my hand... famous last words
Michael Lemontzis what
Pffft
Michael Lemontzis I get it lol
how is it a pun
how is it a pun? cause that sure as hell doesn't look like a pun to me
The noise of air blowing on the thing was satisfying until it started to sound like a dentist tool drilling my molar
Frank Alcala omfg so accurate
Frank Alcala you ruined the noise for me :(
Same principle. Dentist tool is a pneumatic drill. The air spinning the thing up is what makes the sound. ; )
sounds more like a turbo for me.
Frank Alcala those days
Do you guys want more episodes of "cause i can"? Ideas?
Giaco Whatever Yess! I want moar Giaco! :)
Yes!
Giaco Whatever How about a new 'useless device'? Like that switchflicker that turns itself off, but a whole new concept.
a fire extinguisher that shoots flames!
+MrSunnycrocket thanks brother :)
It’s easy to forget how much engineering and applied physics goes into these gadgets
Even if perfectly balanced so it can reach high rpm, its built well and it's given the least resistance possible, it can still explode if sped up fast enough like a shrapnel bomb
@@peteypete9357 explode?
@@MKgumba The SlowMoGuys covered the phenomenon of when circular objects are spun too fast. Look up "CD Shattering at 170,000FPS". Granted the CD was plastic and the fidget spinner is metal, but it can still explode; it would just take an insane RPM to do so.
@@peteypete9357 huh interesting, but i doubt you could get a speed fast enough for the steel to explode, or?
@@MKgumba it may be out of reach to achieve a speed that would make steel explode in current times, I agree, but never know if there'll be a RUclips video doing that in the future someday.
love the sound that emits when begins to spin, sounds like a spaceship
ikr the sound is kinda satisfying
sounds like the new electric porsche when acellerating
It sounds like a Bugatti going 250 mph
Sounds like supercharge
sounds like a supercharger
Would like to see what would happen if dropped in water
+Azeckwazion done in my instagram...
Azeckwaz that Will be cool
Azeckwazion obviously just stop
what if it was used on a president (its just a jojo joke calm down)
then it would make america great again
Who here after spinners died?
Spinners Sucks
Me
Me lol 😂😂
Lmao
Me
Finally, after 5 long years, RUclips's algorithm puts me back to where my head belongs. Oh dear 2016-2017's... Nostalgia
2016-17:)
The good old days
Mid at best..
@@thinveerchellan-uo5sr yes....🗿🍷
*Everyone gangsta till the fidget spinners becomes a hurricane*
Cringe
@@mariecollado5862 mind ur own business take a joke
_ouch I am tilited_
Everyone gangsta till the fidget spinner becomes the 2021 beyblade
Correction bayblade tornado
this is just beyblade on steroids
Campbell DIT lol that's what dub droid said
( ͡° ͜ʖ ͡°)
Yellow hAwk GAMING hahah
Campbell DIT im dead 💀 😂
Campbell DIT no, it's my dying hard drive
You should drill the holes at an angle and see if it flies...
thomas be
3:08 It flew
KrissGO flew
KrissGO lol
thomas Beall and close those stupid holes
3:08 it moved that big vice by being spun at a very fast rate. This is actually something really good to look into
THIS MACHINE IS GOOD FOR MAKING METAL PARTS IN BEYBLADES AND DESIGN LIKE DISC, DRIVER AND EVEN LAYER.
I also used to watch beyblades yay
This machine is called lathe... it's taught in engineering 1st year.
I agree
@@wakai4u728 Are you a mechanical engineering student .
@@biswajeetmohanty1141 no.. I'm from ECE branch..but this is mandatory in first sem for all branches.
3:16 *Original Beyblade theme starts*
ShinyHax 3:31 beywheelz theme starts...
roob dogg Don't bring up that fucking show.
Let it rip!
Norfigrim hahaha
3:10 I dont wanna be a spinner, my dream is... BE A BEYBLADE!
Hahahah realy
Spinner: Nope, I’m outta here
(Hops away)
I wheezed
I have so many beyblades
Reject Spinner return to Beyblade
3:55 reminds me of Indian instrument 'dhol' 😂
Do a fucking Beyblade duell with two of those!!
〈ywxerhjk they would combust and die
they would cause a black hole to form
That's like dividing by zero or ripping the tag off a mattress.... You just don't do it
〈ywxerhjk put razor blades on them
the universe will ripple in time in space then implode on itself
when u tryna play some AAA games in 4k
entire pc's fan:
Z
Ooooooooooooooooooòooooooooooooooooooooooooooooooo......................................
Mmm
When i try roblox at 50 fps
@@radhikasudheer you like your own comment cringe
@@HanzCastroyearsago you like your own comment cringe
@@capybara9521 bruh somebody else liked my comment
Can’t believe this trend was 4 years ago
its been too long
Same
I was literally just thinking about that like that is bazzare to me it seemed like last year or so
Same
Which is funny considering yo-yo’s actually did it first like a decade before fidget spinner’s with the whole Hubstack faze.
Spins so fast it reduced the universes life span by 5 minutes
How???????
@@foxy8855 ✨science✨
@@foxy8855 you prob didn't got the joke but i can understand the confusion a bit
@@foxy8855 u didn't get the joke but by that he meant the spinner spinned for 5mins
He must’ve watched that vsauce vid on the laws of physics or smth.
"Ayo bro, let's play beyblade!"
"Sure thing dude!" **pulls out air sprinkler**
😂
“wait what’s that for?”
“you’ll see”
*5 minutes later*
“WERE IS IT?!”
“I DONT KNOW”
*horrifying spinning sound from nowhere intensifying*
@@kyleart7734 emoji cancer
"air sprinkler" ?
*Nobody:*
*RUclips:* remember this annoying trend?
Yoos
Course
Yeah
Yeah i do
Wtf RUclips whyyyy????? This so old....
You're insane for holding something like this bare-handed, dude.
The slightest mishandle of something spinning that fast....
It could also explode, sending metal fragments in all directions at hundreds of miles per hour.
I run with scissors more than I walk...
Yeah, Very Dangerous!
it could also just act like a solid object and bounce off
@@Sohlstyce a solid object bouncing off at 3 digit speeds.
If that touches flesh, believe me..*It ain't* bouncing off.
Miss those days when we used to play spinners with friends and showing skills with it
If that thing goes kinetic at high speed, I sure as hell wouldn't want it in my hand.
All he did was glue a ball bearing in the middle and he feels safe holding it in his hand at that speed? Man is crazy.
What's that mean? When it reaches the critical point of centrifugal force?
Imagine if the thing shatters in his hand
@@Quakerino or his hands just tilts a little touching the spinning part
if that makes any interaction with his skin he is GONE
3:34 me trying to break the wall that is an obstacle to get a girlfriend...
This comment needs more likes
I feel the pain
Highly underrated comment
F my man
i don grtbb it
3:16 from fidget spinner to beyblade
yes
That's a lot of character development
@@erenav7989 the plot really spinned around
@SHEIKAH Leon Gale force Walll
@SHEIKAH Dragon Emperor Life Destructor.
Now that was quite an interesting spin. All of that ‘G-force’ on a hand especially when metallic can get out of hand any moment (especially if it’s a circle fidget spinner). Nice design.
mother knows best ^
The making of the fidget spinner (the drilling) was super satisfying
Now attach razorblades to it.
For cutiing your hands and hes hand lol; )
Great idea
why?
@@jimuelnathanieln.pamplona1662 9999+ RPM Ninja Star.
And then you realized a second too late that you did not attach the razor blades perfectly and it launched at a very high speed slicing through your body
Sharpen the edges and use it as a handsaw
Joppe Reynaert handsaw in hands. not a good idea?
Game-Byte //VTL very good idea
Game-Byte what are you fucking Dumb its the best idea better then ikea
Handsaw as for sawing your hand
See if it can cut a nokia
As a fidget spinner I can confirm this man is mad scientist
Brick: me with a bag of chips
Spinner: my little brother trying to get some
3:30
Its a metal block not a brick lmao
@Alannithas wtf
🤣🤣🤣
@LegoFan225 yes
This is some real Beyblade shit right here lol
Robert Foley lol
Yeah
Robert Foley Bleywheels u mean
AquaShinyShard - Roblox Gaming nah man bayblade. Dude bayblade was the shit back then.
*beyblade
Fidget Spinner : 999,999RPM
Sonic : The Hedgedog : I am about to end this man's whole career
I'm dead 😂
Rip
Gotta go fast
Flash: not that easy brudah.
ummm you probably haven't seen the backlash the movie is getting 😂😂 so the fidget spinner wins by default
I still cant believe that its been 4 years since spinners were first made
Once these spinners were a legend
So these are the new Beyblades now?
Not really, bayblades are more like spinning tops.
Marcell Fürst beyblades are fighting spinning tops.
Diamond Gaming dont ever compare beyblades with these shitty things
Kekistani Propaganda minister i guess you're 10 right now so ..
Diamond Gaming æ
if you sold these, I would buy one, as long as the price is reasonable
+whiteboi what's reasonable for you?
Giaco Whatever I'd buy it for about $30 to $35
$5.00 considering there are ads for them right below this video for $5.
well the ones in the ad are most likly mass produced if he made a high quality tool stool and bearing fidget spinner then i would buy it
I'd buy this :) For like, 20 bucks, cause this was really well made :)
Put that on a beyblade and, well, let it rip?
Let it R.I.P.
the beyblade arena will fucking time travel into the big bang and destroy all existing matter
+Adam Jhon sounds probable
Lord of Tartar Sauce lol I thought it was a beyblade at first
NOOT NOOT !
I Can See this becoming a lethal weapon of war
a laser disc launcher
Adam Jhon without The laser
It needs lasers and hot babes man. We can't market a stupid disc launcher without laserbeams and hot babes.
Zephyr imagine launching it at card board
FUBOL7 sorry, No Hot space babes in sci fi settings. at least not what I am writing
Only the metal drilling was satisfying enough. Thumbs up!
true
that metal drilling.. without any coolants... he must love his drills a lot (intended sarcasm)
@@MinatsuAi Even just a drop of oil! He must love sharpening bits and buying new ones. Hurt to watch.
You should put spikes on the end and see what it can cut through
Matthew Cichowlas his hands while making it?!
Or using it ^
its gonna be like sonic the hedgehog
Mattexp boy
It spins because it has like almost no friction. It would stop fast if you tried that
I will never forget this video, it's the first time I saw fidget spinners and immediately got into them.
Yeah no, this is not over 100k rip ems. Never ever in a million years. The laser measurement thing is clearly just timing the holes going by, and since there are 7 holes, its readings are going to be off by a factor of 7 as well. But we have a better way of figuring out the actual spin rate. If you look at the waveform of the sound at 2:00, it takes 15 samples for one full oscillation. 15 samples at 44.1 kHz works out to 2940 Hz, which is the noise created by a 6-ball bearing, so you divide that by 6 to get the spin rate of the entire thing, which is 490 HZ, or 29'400 RPM. Which is still quite impressive so I don't see why you would lie about it, but then I'm not a clickbait youtuber so what do I know.
Thundercunt McGeezax see thats what I was thinking but I'm not sure anymore. he's obviously aiming it directly at the side, you can see the red dot. and usually u use a reflective point as reference that you stick on or something.
Only correct response on here
What a nerd. Then he gets mad.
Thundercunt McGeezax I can see your argument but maybe he didn't understand how it worked.
but what it c.a.t really spelled dog
That’s a weird Beyblade u got there
no its a fan
Someone who remembers beyblades
Grenademello Beyblade is pretty popular in Japan and kinda popular in the u.s it’s far from dead
ElectroZ ZD and also in poland :D
GERMAN GAMER Pegasus lvl.100
In Germany we call this a "Flex"
Tape?
@@Vandarte_translator No just flex without tape
FLEX is a other word for WINKELSCHLEIFER
jawohl!!!!
nah nah nah du denkst an die Russen
Spinners were 5 years ago!? I feel so old now
FINALLY THIS GUY IS GETTING THE RECOGNITION HE DESERVES, IVE BEEN SUBBED TO HIM FOR 2 YEARS AND THIS IS HIS FIRST VIDEO TO GO VIRAL SO QUICKLY.
Thanks a lot! Really appreciated! :)
stellvia hoenheim I was here when he would only get like 1,000 views per vid, fuck off.
King Jordanii go fuck yoursel
I'm secretly a Taco Clickbaited so hard
I'm secretly a Taco lmao click on your channel first thing I see "This nigga teleported"
nice fidget spinner toy, as you can see this toy is completely safe and harmless to your kids just like my sarcasm
well your kids cant spin it that fast cause they dont have the airblaster -_-
Air gun. Not air blaster. What do you think this is, COD IW?
lmao maybe i've been playing video games too long
Robert Beck ó
Forrsch, you profile pic look a face of a noob in roblox
Everyone gangsta till it starts breaking the sound barrier and leaves the atmosphere
And breaks a few bones probably 😂😂
Yoo got it recommend after 5 years
Is the measurement accurate?
100000 rpm=1700 rps
and assuming that its circumference is 0.2m
That'd be 340 m/s or 760 mph or Mach 1.0
Well when you achieve the speed mach 1 you can hear a sonic boom and as far is i know there were no sonic boom in this video atleast.
a fidget spinner is not a plain..
wut...
+__ErikUrtifed plane*
planetX15 oh yeah, sorry about that.i'm italian, not really used to write in english, forgive me 👍
If the glue fail or the bearing burst into pieces, this thing will rip his fingers of his hand before he even understand what just happened.
which is why that won't happen.
Superglue is fucking strong, plus the hole size is close enough to the bearing's size where I'm sure it would friction fit in, and the glue is probably for security just in case, and steel bearings have been known to stand 80,000+ rpm with no reinforcement so imagine what it's like with the reinforcement of half an inch of steel, which is reinforced by another half inch attached with 7 steel beams.
also i'm not sure if it's stainless steel or aluminium but aluminium is still almost as strong as steel
ball bearings.
GG EZ
+Dat Person Doe. Finally someone who knows what he's talking about... thanks you!
how hard is it to rotate it perpendicular to its axis when it's spinning that fast?
+herpsenderpsen REALLY hard...
wow that was a quick response considering how popular this vid is, thanks for the reply.
+herpsenderpsen thank you for being here! :)
I was gonna say, that must make one hell of a gyroscopic effect.
the angle of the dangle is inversely proportional to the heat of the meat
Pov: you have this in your reccomended after 5 years.
You know if that thing really does 100k rpm and we assume it has a diameter of 4 cm, it means its limit moves at about 750 km/h
yes right
I'm pretty sure it goes a little bit a above 100k, the acceleration of that thing probably peaked above 100k rpm, i mean that thing accelerated faster than any car on the road.
So still subsonic? Is it possible to go supersonic? If so what would it sound like?
@@luciengrondin5802 Like a helicopter I guess a fast one. (Helicopter blades are rotating and for safety reasons the rotation has to be no more than the speed of sound). This is why helicopters can't go really fast. Their top speed is a fraction of the blades rotation speed.
@@ac0unt_un04 Some problem with the airflow. The turbulence I believe. But have a look at a proper explanation yourself. Google is your friend.
LET IT RIPPPPPPPPPPPP!!!!!!!!!!!
Techno sailor BEYBLADE BEY BLADE LET IT RIP
Techno sailor lets fight a epic battle face off and spin the metal
Techno sailor No time for doubt now no place for backing down
lol same thoughts
its like bey blade and dragonball z combines, LET IT RIP, ITS OVER 9000! xD the blades are just teleporting all over the arena lol
I love you, everyone else measures in mph and not RPM.
imKhaos DG mph would make more sense
Edin743 No it wouldn't, Mph, kph would be used to go to place A, B, C, and etc.
Spinning is specifically for RPM. MPH can be used, but it's impractical, if you're measuring from the exact center, it's going 0 mph, if it's on the outside, whatever mph it is since it's a rounded object.
Edin743 RPM is rotations per minute, it measures from the center to the edge, making it more reliable than a point wherever on the spinner.
Conclusion, RPM is better for a fidget spinner. Just common sense.
imKhaos DG well I don't understand RPM
Edin743 Then don't say anything about it.
it's 4am but I'm glad i opened RUclips to find this in my recomended
Please make Fidget Spinner VS Beyblade would be awesome XD ;) Who else thinks so ?
PatcrafterMC me
PatcrafterMC You
PatcrafterMC me
no
bey blade bey blade let it rip
TechnoCloux don't copy that floppy
Mr Mateio62 did you just make a borderlands 2 reference?
Tyronethe3rd no I think they made a pokemon 2: shppuden ball Z refrence.
I was just going to comment that :(
ice tea!!! me too xD
I'm just thinking what if you touch it when it's spinning?
Then your finger/whatever would have quite a bit of skin missing.
Ignisaer - Gaming yeah probably a bit more than skin...
well if the surface is smooth then nothing will happen
Jesus Nope with the speed it's going at it can burn through skin
why the fuck did you bother asking what would happen if you seem to know what would happen
cant believe fidget spinners were 4 years ago
That tachometer is likely giving a falsely high RPM reading. It likely shows greater than 99,000 RPM, because of the holes drilled into the fidget spinner. Tachometers look for patterns that indicate each rotation. The tachometer probably "thinks" each hole in the spinner is another rotation. However, each hole is only ~1/7 a rotation, so it is likely reading 7 times too fast.
That spinner sounded and looked fast, but not >99,999 RPM fast.
The best way to test this would be to put one single piece of black tape or a single mark from a black marker on the side and take the reading from there.
yes! finally someone with more than 2 brain cells!
You can tell from the frequency of sound from the compressed air. Every audio oscillation is the sound of a hole passing in front of the air stream. This happens to be ~3.1kHz. 3.1kHz means (3100 holes / 1 second) * (60 seconds / 1 minute) * (1 revolution / 6 holes) = 31,000 rpm.
'Murica.
Finger moves:
Fidget spinner: so u have chosen Death
3:35 sparks!
3:33
100 th like
That's some beyblade kind of shit right there.
3:45
Beyblade in a nurshell
I love your reason and motive for making it!
Now this was crazy cool! Glad you still have all your fingers so you can start a new viral trend: 100000rpm fidget spinner vs. "whatever" ;)
vs "whatever" would be his fingers tho :P
+Alex 2Q ahahah thanks brother...
Alex 2Q it's going to be the new 1000 degree knife
Campbell DIT Let's hope so for Giaco. Only difference is that not everyone can machine a spinner for that trend ;)
Alex 2Q as DF gorduchinha
This would be the ultimate beyblade. 😂😂😂
Dub Droid ikr
Dub Droid you could machine your own beyblade and give it to your kid and they would be the richest kid on the play ground if they played for money.
Alec C lol beybwade wet it WIP!!! ....$500 later
+Alec C ahaha
Dub Droid hahahaha😂
2 minutes after the video a black hole was created.
+xeonomorphieus how did you know?!
I am an alien
you sure blend in, here.
xeonomorphieus and then it evaporated cause it was too small
not enough gravitational energy was created with it's mass and kinetic energy m8
Sometimes I wish this trend never died.
But sometimes in life we don't always get what we want.
But if you try sometimes
You might find
You get what you need
Me: *open youtube *
RUclips: Hey! Do you remember spinners?
And that my son is how Beyblades were made 😂
Dragonikor X dammn shit got nerfed too much.
Bad Boy 420 ikr
horryyyy shit.. beyblades were the real deal
and no fucking doubt kids are going to try this shit seeing how fast they can spin them then throwing them into a ring. looks dangerous af hahaha
hey bro.
everyone gangsta until spinner starts sparking
3:41
I’m here after spinners became the history , July 2022 right now.
What if your hand slips?
You won't have a hand anymore.
There's actually not a lot of power in these things. Machine shop workers do this stuff all the time with the air compressor. You could just grab it and stop it instantly like the toy that it is.
Br!an Delta V lol im a machinist if its spinning 99999+ rpm you can grab it off my finger bud. id let that lil bugger slow down a bit first.
There's just not much kinetic energy there. Most people don't know that.
Joshua Kelm science and maths am I right
No one? Let me: Its over 99999!
Divine Linker lop
Youwon'tbelievehowlong myusernameisit'sinsane (yep, I typed it out), so it's ninety-nine *thousand* nine hundred and ninety-nine *thousand*?
wow
bc that meme is from 2013
please stop we have a word for what you just did in sweden its called besudla
so please stop besudling the internet
its my duty
infinite spin energy
Everyone: Why would you make a Spinner spin that fast?
Giaco: Yes
At last it is like beyblade🤩awesome👌
OMG THE BUFFERING SYMBOL IS A FIDGET SPINNER! WHAT IS LIFE!
XD
dang it
they basically do that with all fidget spinner related videos
cancer, apparently
HOW THO??????
Does anyone else think that watching it being carved and made satisfy you?
I am a machinist and the inaccurate offset of the holes upsets me. He should invest in a rotary table for his mill if he often does bolt hole patterns, it makes life easy.
He already has the mill why not have something he can do bolt hole patterns with. He can make a lot of other things besides fidget spinners that require symmetrical or precisely offset holes going around a axis on one of those, well worth the investment.
a51mj12 u
look into Machinist, it's nothing but satisfying cuts of metal.
Doing it is even better
Put a shaft on it and you have a gyroscope.
+John Creasey done but needs to be balanced well and this was not... yet...
I was thinking the same thing and that would be the most badass thing ever. God! I love being a Stem major. Numbers are soo much better than girls. ;P
Put it on your shaft and you will become a gyroscope*
This looks way better then tesla turbine. Good job
plot twist: actually was 99998 rpm
Κάτι τέτοιο. 😂
But what if it was actually 100000
@@CarlJohnson-mf4qd fuck's wrong with you fool!
@@combatantezoteric2965 how about you shut the fuck up joker
What if it was photoshop,🤔🤔🤔
Now that I know how to harness the perfect Beyblade, no one at my school will beat me and I'll be seen as a god
If a beyblade could spin +9999 rpm
That bey can dig
[DS] TiaKnifeyUSSR no one cares about burst gtfo
MFB is the best
@@detective6393 id say mfb is better but i like burst as well lol
prod. by 666cxre metal fusion is better
This was entertaining to watch
3:50 When a little kid want to see other side of fence.
🤣🤣🤣😂😂😂
Nobody:
RUclips: HEY THERE, AN AMAZING TOY FOR YOU
you guys do know that these are just weird shaped beyblades without a bottom.
Kymani Hewitt I nicknamed them 'gayblades'
Kymani Hewitt I don't think any one realises fidget spinners are made for autistic kids
Goldbootenz fidget spinners are for retarded chavs
Goldbootenz Or children with ADHD.
MLG R8DR805 I have ADHD and I don't find them that interesting tbh
Does it work like a gyroscope Though
Looks like the algorithm has brought us together again.
Indeed
Ah algorithms. The new form of jail.
make one with tilted edges so it can produce lift
Attach razor blades
Flying helicopter of instant impalation
Just Imagine Going To Class With This 😂
imagine just spinning that and aiming it at the teachers head
UniversalCurse gonna do that tommorow in class tho
DayzGoneBy autism Is the funniest thing ever am I rite xdxdxdxd
But you need that air cannon thing to make it go super fast
MrCelsius Air cannon thing - kids these days .
4 years later and this beauty is in my recommended
This is always a good video to come back to
In essence this is how fast beyblade are going while creating sparks when colliding with another beyblade(if you know what a beyblade is)
I agree yet I don't know what u mean....this fine😕😕😕
What a strong hands those kids have
@@shin1344 nice launchers
Beyblade Rebooted.
Imagine a metal fidget spinner turn into Pegasus.
OfficialCQZ man burst sucks dont ya think
Legend Spriggan exactly I miss the old metal ones
OutBurst Yt me too
Jommel Lambon Just A Villager yes burst sucks
4:10 A real Bayblade! xd
Enrique Villarreal I I