You saved my life good sir!!!Thank you so SO VERY MUCH! Without you I wouldn’t be able to move this beast and i wouldn’t know what to do at all because the moving company is not available. Thank you from the bottom of my heart 🙏 🙏🙏🙏
This is one of the best how to videos I’ve seen on RUclips. Thank you Matt! I’m moving and need to move my FT1. It’s a fantastic machine-Hope you’ve enjoyed it in the past year!!
Hey, thank you so much for the video! I picked up one of these yesterday and didn't have a chance to figure out what tools were needed before the job. Your tutorial saved the day and I've now got an awesome FT1 at my house. Thank you!
Thanks for the video! This is great machine and I plan on taking it with me one day but haven't seen any other instructional videos. This was very beneficial.
Thanks so much for making this video. I just bought an FT1 off of craigslist and he had it all disassembled when I picked it up. After watching your video I now have a game plan to assemble it tomorrow.
Just wondering if a dodge caravan would be big enough to transport the FTX? Pretty sure my Rav4 will be too small. Or should I just rent a 1 tonne Van?
Thank you for this video..i got this machine for free if i could get it out of a 2nd floor abandoned apartment..without this video it would have taken forever...removed it in a little over 1 hr. Thank you so much!!!
I wanted to buy a used model from market place. Wanted to ask, can I remove the middle braces and lay the 2 posts on their back in 2 trucks and take them like that ? Or do I have to disassemble everything?
Thanks. Question. Those Round RUBBER grommets at the top of the chrome weight stack slide bar,..? I was moving my unit and one came out of the gole and slid down the bar. How in the heck can I get that back in the hole just below the top pulley???
Sorry I took so long to replay, I don't keep up with this very well. On mine all what I did was unbolt that top plate where I can move it around and make it go where it needs. I considered putting some wd 40 on it but I wasn't sure what that would do to the rubber
With all the weights removed I’d guess 50-75 lbs. One guy can carry it the halves, one at a time.I Hauled it with my ram 2500, 6’3” bed with the tailgate down. I would think a midsize Truck would be ok.
I would at least take the weights off, that’s like 300lbs right there. if you have lots of room and some good ramps and a dolly that might help. Let me know how it goes 👍🏻
I need to move Inspire FT2. Would be grateful if someone can help. Contacted manufacturer and they very kindly told me to follow all the instructions from the manual in reverse (how helpful). It is clear one does't unscrew every little screw when you are just moving as opposed to mailing it to someone new. So not helpful. Would be grateful if someone chan help by making video when they are doing it.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
You saved my life good sir!!!Thank you so SO VERY MUCH! Without you I wouldn’t be able to move this beast and i wouldn’t know what to do at all because the moving company is not available. Thank you from the bottom of my heart 🙏 🙏🙏🙏
You’re most welcome! I’m glad it helped!!
Thank you for taking the time to make this video. We just moved ours and your guide was very valuable. You saved us time and a lot of headaches.
Awesome! Glad I could help!
Thank you so much for making this video!! Moving it to the other side of my garage and there’s no way I can do it without at least removing plates lol
Awesome video! Much appreciated! 🙏
This was extremely helpful! I saved a ton of time because of your video. Thank you.
Thanks man. Just moved one. Perfect instructions 😊
Thanks for the video! Every quote we got to move it was around $1000. We are going to do it ourselves now with your plan.
This is one of the best how to videos I’ve seen on RUclips. Thank you Matt! I’m moving and need to move my FT1. It’s a fantastic machine-Hope you’ve enjoyed it in the past year!!
Doug McKee Hey, thanks! I really appreciate the kind words.
Hey, thank you so much for the video! I picked up one of these yesterday and didn't have a chance to figure out what tools were needed before the job. Your tutorial saved the day and I've now got an awesome FT1 at my house. Thank you!
Thanks for the video! This is great machine and I plan on taking it with me one day but haven't seen any other instructional videos. This was very beneficial.
You’re welcome! Thanks for taking the time to comment!
Thanks buddy you saved me a lot of time and hassle today
Glad it helped!
This is perfect, I’m picking one up tomorrow and had no clue how I was going to move it. Thanks for posting!
This just helped me big time. Thank you!
You’re welcome! Glad I could help!
Thank you for this video! I bought the same machine and this video had me prepared with the proper tools and saved me tons of time and headache.
Awesome, glad I could help! Thanks for taking the time to comment
Great step by step tutorial! Thank you for making the video, it was a big help.
Thank you. Your video is very helpful and is exactly what I was looking for.
Thanks for the video very helpful
Great video! Thanks!!
Thanks so much for making this video. I just bought an FT1 off of craigslist and he had it all disassembled when I picked it up. After watching your video I now have a game plan to assemble it tomorrow.
Nice. thanks
Found this trying to figure out how to move a full size Free Motion commercial unit. It's a smoking deal, so I'm going to have to figure it out.
Thank you!!!! I’m moving was worried about moving it!
You are welcome 👍🏻
Hey thanks for the video I'm about to move mine next week to our new home! Hopefully it all works out :D
Congrats on the new place! Be careful and take your time and I’m sure it will go great! Thanks for taking the time to comment!
Is it possiable to do it only with 6mm allen key and the wrench?
Just wondering if a dodge caravan would be big enough to transport the FTX?
Pretty sure my Rav4 will be too small.
Or should I just rent a 1 tonne Van?
Thank you for this video..i got this machine for free if i could get it out of a 2nd floor abandoned apartment..without this video it would have taken forever...removed it in a little over 1 hr. Thank you so much!!!
A legend you are I tell ya, a legend
I wanted to buy a used model from market place. Wanted to ask, can I remove the middle braces and lay the 2 posts on their back in 2 trucks and take them like that ? Or do I have to disassemble everything?
By the 2 posts I mean the 2 weight racks with the towers assembled like how it is. Just detached from the middle and laid on their back
You're my hero bro thanks
Thank you!!!
Going to pick one up in the morning and this is exactly what I was looking for. Thank you.
P.S. I was going to be "that guy" if not for you
ty for this
Thanks. Question. Those Round RUBBER grommets at the top of the chrome weight stack slide bar,..? I was moving my unit and one came out of the gole and slid down the bar. How in the heck can I get that back in the hole just below the top pulley???
Sorry I took so long to replay, I don't keep up with this very well. On mine all what I did was unbolt that top plate where I can move it around and make it go where it needs. I considered putting some wd 40 on it but I wasn't sure what that would do to the rubber
Thank you SO much!!
How much did each half weigh? All I have is my wife to help. Also did a mid size truck work?
With all the weights removed I’d guess 50-75 lbs. One guy can carry it the halves, one at a time.I Hauled it with my ram 2500, 6’3” bed with the tailgate down. I would think a midsize Truck would be ok.
Thanks
Thank you.
Do you think 4 guys could load it onto a trailer without breaking it down?
I would at least take the weights off, that’s like 300lbs right there. if you have lots of room and some good ramps and a dolly that might help.
Let me know how it goes 👍🏻
@@v8fieromatt thanks
I need to move Inspire FT2. Would be grateful if someone can help. Contacted manufacturer and they very kindly told me to follow all the instructions from the manual in reverse (how helpful). It is clear one does't unscrew every little screw when you are just moving as opposed to mailing it to someone new. So not helpful. Would be grateful if someone chan help by making video when they are doing it.
I'm in the same boat. I need to move my FT2 down to the first floor of my house and am trying to figure this out as well.
Have you figure it out for the ft2 was it the same thing as the ft1 except the smith bar?
Camera work made it hard to follow.
Thank you!!