Thank you so much for the detailed explanation It's very useful .. However I have a small doubt , it would be great if you clarify Why would recursive lookup happening in Global table ( though ultimate destination is in VRF)
what if the PE is running EBGP towards the CE while the same PE is running 0SPF towards the P-router. do we configure redistribution between the 2 routing protocol on the PE?
Hi Rohit, when we use MPLS with IPV4 BGP peering between the PEs (as explained in your example) what would be the significance of the local label generated on PEs ? In your example XR1 will generate 19000 for 2.2.2.2 but it will never be used any where as it always do LABEL push
Because he's a professional test taker. INE's business is making training material. (way more than just these public videos.) And people seeking a CCIE will pay a load for training material.
No wonder Rohit is CCIEX5, he explains complex topics so well. Thanks Rohit!
Brilliant and simplest way to understand MPLS...Highly recommended ..
Hi Rohit, I was one of your student of a CCIE SPv4 bootcamp in Amsterdam. Hope you are doing well. Thanks for this great video !
Very good video, thanks. One of the most well explained videos about MPLS basics.
It was really Superb Explanation on the MPLS Labeling & now i got how the lables are being attached & Pop on the PE. Thanks for this video
Plain explanations and with examples. Excellent video!
Great explanation, thank you!
Rohit, that was an excellent explanation on a complicated topic, thank you!
excellent webinar... thanks a lot man
great great video rohit ,so good .
Very good explanation👍Thank you
Amazingly done Rohit !! clean as a whistle, thank you once again.
Man you are so prepared ...
thanks for the wonderful video
excellent video , very informative. please provide us more videos about MPLS.
Straight-forward and informative, thanks!
Best Instructor!!!!
Awesome! Great explanation.
Great explanation ,Thanks heaps....
Thank you Rohit:)
Great explanation!
Please have webinar on MPLS VPN L2 AND L3
Thank you so much for the detailed explanation
It's very useful ..
However I have a small doubt , it would be great if you clarify
Why would recursive lookup happening in Global table ( though ultimate destination is in VRF)
Suppose we have a VPN static route , then recursive lookup also happens in VRF table for the next hop right ?
Thanks Rohit . One Que: Which device generate transport label & which device generate VPN label. What is mechanism.
u mention about optimizing mpls but can we have that session as we which will make us understand better
Damn, Brah. 5 CCIE. When will it be my turn. Haha, Just getting my CCNA now.
what if the PE is running EBGP towards the CE while the same PE is running 0SPF towards the P-router. do we configure redistribution between the 2 routing protocol on the PE?
please have webinar for bgp evpn l3 and l2 also for getvpn
Hi Rohit, when we use MPLS with IPV4 BGP peering between the PEs (as explained in your example) what would be the significance of the local label generated on PEs ? In your example XR1 will generate 19000 for 2.2.2.2 but it will never be used any where as it always do LABEL push
Great!
Please make videos on SR with Cisco as P core and Nokia as edge in ISP
The text is hiding the output commands of router
How have you the time or money to achieve 5 CCIE certs? Those things are expensive.
Because he's a professional test taker. INE's business is making training material. (way more than just these public videos.) And people seeking a CCIE will pay a load for training material.