If ya want 1 build 1 there’s plenty of step by step diy videos on RUclips Gazza garage is a good watch for building I’m currently building a race mower and race track and registering a nz club I might do a couple videos of my builds I’m a automotive machinist so everything will be professionally built cool videos this dude doing
I want to put green lights on mine end chrome rims they got to be gold yellow Chrome and do the body chrome green almost like the John Deere Green but do it like a color shift make lights definitely
Goes to show what a simple mundane thing like a lawnmower, a welder, and a little bit of imagination can do. I am in the process working on my own rat rod mower. I’ve had a blast every step of the way truly is a special community can’t wait to be apart of the custom lawn mower crowd 😎🤙🏻🤙🏻
I fixed a craftsman riding mower (with a B&S engine) that had a popped valve seat just like yours. I used a punch and peened the case over the edge of the ring. The mower has worked for years since I fixed it. The seat pops out due to overheating
I'm trying to pulley swap my mower, I have a john Deere like yours but I can't find a front pulley that fits in the front on the engine can you recommend me a pulley that will fit
Had the valve seat come out on me as well. I just jammed it back in and then dot punch around it to hold it in place. Raced it about 6 times since then and it's still going strong.
17 hp, i can say i have a stronger crappier racing mower than these guys after i finish mine, Awesome content, your videos have inspired me to fix my old racing mower so many times, and have helped inspire me to build the one i am building now, Keep up the good work
i would like to see you wire lights to your John deer race mower so you can correctly ride it at night if you take the john deer race mower out at night again
Nice bro! Maybe want to build something like this but i don't have a shop or garage? Also limited by tools etc. like i dont have a weldingmachine. Any tips maybe?
Those motors are known for that if you horse on them to hard that happens and yes you can put it back in and go again use red locktite it helps it stay in
im learning how ro weld too. Your welds are better than mine lol. i just bought a TIG welder to practice. Also Im going back to school on welding Fundamentals
yo i came across a john deere 111 for free and im currently in the processes of rebuilding in just like your 108, is there any way i could get ahold of your build photos that would be awesome, mainly on slamming the front, throttle and clutch
@@spudstudios3342 yeah i know. I have the same 801. We did a maintenance on it 2 years ago. All gears in perfect shape, no demage. Awesome transaxle. I was fascinated when i watched these videos and saw what it can do
yo i came across a john deere 111 for free and im currently in the processes of rebuilding in just like your 108, is there any way i could get ahold of your build photos that would be awesome, mainly on slamming the front, throttle and clutch
yo i came across a john deere 111 for free and im currently in the processes of rebuilding in just like your 108, is there any way i could get ahold of your build photos that would be awesome, mainly on slamming the front, throttle and clutch
Let’s be honest… we all want one lol
I have one
If ya want 1 build 1 there’s plenty of step by step diy videos on RUclips Gazza garage is a good watch for building I’m currently building a race mower and race track and registering a nz club
I might do a couple videos of my builds I’m a automotive machinist so everything will be professionally built cool videos this dude doing
I’m working on one myself
I want to put green lights on mine end chrome rims they got to be gold yellow Chrome and do the body chrome green almost like the John Deere Green but do it like a color shift make lights definitely
I’ve added a couple of videos of my current build I will do more vids if people are interested in watching
Im working on a racing mower right now and Im using this as inspiration. love how clean it is, great job
Same here and I'm 12
Goes to show what a simple mundane thing like a lawnmower, a welder, and a little bit of imagination can do. I am in the process working on my own rat rod mower. I’ve had a blast every step of the way truly is a special community can’t wait to be apart of the custom lawn mower crowd 😎🤙🏻🤙🏻
Simply brilliant! Like that you mention the reuse/repurposing of parts. Your builds are most creative…fun to see, thanks!
So glad to see you revisit this! Your first video inspired me to make one myself. I'm still in the process, it's going well!
Did this to a 170 after seeing yours for inspiration. Blew the gearbox up after 2 days. I’m surprised yours had held up.
I fixed a craftsman riding mower (with a B&S engine) that had a popped valve seat just like yours. I used a punch and peened the case over the edge of the ring. The mower has worked for years since I fixed it.
The seat pops out due to overheating
Aha!Thanks
Awesome build DUDE!!👍👍👍
needs steel pulleys, those cast aluminum ones love to break, and bypass the gov for more control and speed
I'm trying to pulley swap my mower, I have a john Deere like yours but I can't find a front pulley that fits in the front on the engine can you recommend me a pulley that will fit
We Live in the Same Town, Let's Collab On doing some Paint Work on It! Love the Content! 🎥🔥
9:29 that TIG is looking nice!
Can't wait for part 2
Had the valve seat come out on me as well. I just jammed it back in and then dot punch around it to hold it in place. Raced it about 6 times since then and it's still going strong.
17 hp, i can say i have a stronger crappier racing mower than these guys after i finish mine, Awesome content, your videos have inspired me to fix my old racing mower so many times, and have helped inspire me to build the one i am building now, Keep up the good work
i would like to see you wire lights to your John deer race mower so you can correctly ride it at night if you take the john deer race mower out at night again
Nice bro! Maybe want to build something like this but i don't have a shop or garage? Also limited by tools etc. like i dont have a weldingmachine. Any tips maybe?
Get a craftsman mower if you want to lower it for the rear you just flip the brackets same for the front and they are super common
Those motors are known for that if you horse on them to hard that happens and yes you can put it back in and go again use red locktite it helps it stay in
You should add a after market slide carb
im learning how ro weld too. Your welds are better than mine lol. i just bought a TIG welder to practice. Also Im going back to school on welding Fundamentals
You’re a great inspiration!
If you take a snow brush to your board and bindings before you bring it in it won't melt all over the shop floor
I'm putting a 30hp briggs and stratton v-twin in my john deere 111
I did the same last year and even with the belt tight as a bowstring it still slipped
headlights and brake lights would be sick.
just saw another video some dude in europe did the same thing. he put a race exhaust on it on the back. its on youtube. hes a master fabricator
I wish i still had my 1963 110
Fit a led bar in the slid in the hood for night riding
Guys get him to the 100k subsribers
You should get a twin 700 cc that would make for a good video
How is the seat mounted to the body or frame. Building my own almost finished.
how do you make the foot throttle? ive been very intrested in one of those
Peddle attracted to a universal throttle cable and you cut it so it fits on the throttle piece good
...so what are your pully ratios...size on engine & size on trans??
my yard is barely big enough to need a push mower, but i wanna build one of these lol
Do it!
First
congrats
you are the man
Ok thx, Iam inspired
love your videos! 🏎
yo i came across a john deere 111 for free and im currently in the processes of rebuilding in just like your 108, is there any way i could get ahold of your build photos that would be awesome, mainly on slamming the front, throttle and clutch
I juz got done building a 111 tjat looks like this 😂
you can fix that valve seat. Look up "punching the head"
🔥🔥🔥
Love it
What kind of welder do you use
Hobart 210
what pulleys were you running? i got a 111 but not sure on what sizes to go with
Did you have to take out the governor??
bro how did you do the camber?
What transmission are you using?
Does anyone know what model the ride on mower is called?
😎👍
you do need to add a turbo and A Small Boost bottle.
OK like how much would it cost for you to build me one just like that
whats it called?. i got inspired and i want that exact one but then modify it and make it like race and drift.Just like the one in the vid at 13:48
:)
what kind of peerless is that under it?
801
@@spudstudios3342 thx. Its amazing how well the 801 handles the pulley swap and the speed.
@@ErdeCashthey have all steel gears like an 820, just smaller axles. they are very strong
@@spudstudios3342 yeah i know. I have the same 801. We did a maintenance on it 2 years ago. All gears in perfect shape, no demage. Awesome transaxle. I was fascinated when i watched these videos and saw what it can do
@@ErdeCashahh, ok. Wish i could find one...
U mind telling me what type of engine this is?
😮
why dont you instal a mx bike low cc engine in the mower?
Hey ! why there is an opening on the hood ? To cool the engine ?
Is it a 2 wheel or 4 wheel
omg it is a intek
Cyber mower.
What size pulley do you have?
You gotta reupholster that seat man
GIVE IT A TURBO
Habis biaya berapa bang?
5:00 pm, Mam, I'm here to cut your grass.
5:10 pm, Mam, I'm done.
Can i buy it off you please
are you selling
RIFT IN NO
yo i came across a john deere 111 for free and im currently in the processes of rebuilding in just like your 108, is there any way i could get ahold of your build photos that would be awesome, mainly on slamming the front, throttle and clutch
yo i came across a john deere 111 for free and im currently in the processes of rebuilding in just like your 108, is there any way i could get ahold of your build photos that would be awesome, mainly on slamming the front, throttle and clutch