How to remove car door panel Suzuki Alto and Nissan Pixo
HTML-код
- Опубликовано: 1 окт 2024
- In this video I will show you how to remove the door panel on a Suzuki Alto (same as Nissan Pixo and Maruti 800).
In this door panel removal tutorial, learn step-by-step, how to remove the door panel from a Suzuki Alto or Nissan Pixo.
I show you all of the tricks so you don't break anything or damage the door in the removal process.
Removing a car door panel begins with removing any items that may be holding the door panel to the door that are not clearly visible. Discover how to remove a door latch, and what tools are needed to remove the car door panels with the help from this free video on car repairs.
This procedure particularly applies to the vehicles listed below but can also be used as a guide for various other vehicles as most car door panels are secured in the same manner.
The techniques shown in this video apply to the following vehicles:
- Suzuki Alto
- Nissan Pixo
Tools Used:
- Flat Head Screw Driver
- Phillips Head Screw Driver
~-~~-~~~-~~-~
Please watch: "Tutorial How to P0325 Knock sensor replacement"
• How to P0325 Knock sen...
~-~~-~~~-~~-~
Please leave a LIKE it only takes 1 second.
Thanks very much!
The first step, removing the plastic 'rivet/bolt' was exactly what I was looking for. Keep up the good work and thanks!
Thank you for the comment 👍
It's 100 times more simple than what I was expecting
Yes, it's very easy. 😄
Thank you for a great video. It was very accurate :)
In case someone is wondering if the speaker cables are in the doors on a Suzuki Alto - even if the car isn't born with speakers in the doors - they aren't. Atleast not on my wifes Alto from 01/2014.
Thanks 👍
I have a 2014 alto, it has speakers in the front doors but not the back, will there be cables in the back doors to add speakers?
@madswh I have no clue: can you just remove some panels and add some wires to install speakers in the doors as well?
My drivers side electric window switch is knackered and I have a new replacement do I need to take the whole door panel of to change it thanks?
Hi, if is just the single switch on top then you don't need to remove the panel, but if it's the complete assembly then you need to remove the door panel.
@WhatTube thanks its the window switch and the door locked switch the compleat assembly switches so your video is helpful 👍
DoneThanks. Easy
You're welcome 👍
Can i ask a question, i was a bit too firm with the central lock button (i was frustrated about something) so i ended up knocking it (with the window switch) down through the hole. I don't think it's broken just unclipped as i'd say. Is it possible to clip it back in place by removing the door panel? I hope it clips back in i can't do with it being broken.
Hi, if is just unclipped as you said then yes you can clip it back in place.
@@WhatTube Thanks, yea i followed the video, took the panel off then clipped the switch box thing back in place. Put it all back and it's like it never happened, i couldn't be more happier i really thought i f*cked something up. Cheers 👌
👍
Thanks for this. I have to do this job tomorrow to fix a door handle. Very glad to have found this video.
You're welcome 👍
Hello.
Please tell me the name of glue(black glue) with transparent paper is stick
????
Hi, it's an adhesive like a silicone.
Super, acheté le rétroviseur sur internet à 60euro et installé en 10 minutes. Dans ma suzuki alto ce n'était pas des vis mais des petits écrous.
Merci car au garage ils demandaient 220euro pour faire le travail + le rétroviseur.
Mon rétroviseur est manuel, pas électrique, du coup, il faut enlever que le cache du haut et pas toute la portière :-)
How did u remove the power window and centerl lock button?
Hi,
You just need to unplug a clip when the door panel is removed.
In my case the the button was pushed inside by the owner, that's why I had to remove the panel.
:)
Very helpful video. My 2013 Alto's driver side electric windows are working intermittently. I am guessing the switch or motor is knackered. Will check on the weekend. Is this a common problem?
Hi and thanks.
It's not a common problem but most of the time is the switch.
How did you remove the window controle panel ?
Hi,
It's just connected with one connector.
Very helpful for getting the door panel off, thank you.
@Emil Its Me I don't I'm afraid, I read one thread which suggested you should use 7" speakers but this was never confirmed anyone official so I'd be very wary of it.
Thanks.
The screw inside my door handle is all rusted, any ideas how to remove it?
Hi, the easiest way is to drill the screw out and then replace it with a new one.
WD40
How many inches are the speakers in the door of this vehicle? can you help me?
Hi, I don't remember the size of the speakers but this is the part number that fits in these cars 39102M68K00.
Thanks for your help
I drive a Nissan Pixo. Are there speaker cables in the doors?
I want to build loud speakers in the doors!
Would be if you can answer that for me!
Hi, yes there are speaker cables in the doors.
Do you know what colour these wires have?