A Monster Birch Plywood Bookshelf | PLUS BONUS FOOTAGE - Phenomenon Caught On Our Camera's EP#46
HTML-код
- Опубликовано: 15 янв 2021
- If you like my content & would like to support the channel monetarily you could buy me a coffee:
www.buymeacoffee.com/abuRxi4
Or directly via paypal:
PayPal.me/TLcraftsman
-----------------------------------------------------
Hello every one, how's it hanging?
This one is a big one, both in height and protect size!
We loved this one from start to finish.
Its all made from Birch Faced Ply.
Its all made from 25mm thickness, is 4m tall, 2m wide and 0.3m deep.
It has no backing to be able to see the panelled wall behind and it is made to fit in between 2 beams of the timber frame house.
Lastly this beautiful piece is finished off in 3111 white Osmo oil.
So enjoy the fitting of this beast of a bookshelf.
Ryan
============SUPPORT============
If you like my content & would like to support the channel monetarily you could buy me a coffee:
www.buymeacoffee.com/abuRxi4
Or directly via paypal:
PayPal.me/TLcraftsman
==========SOCIAL MEDIA==========
SUBSCRIBE HERE: / @thelondoncraftsmanwor...
FACEBOOK: / thelondoncraftsman
INSTAGRAM: / the_london_craftsman
RUclips: / @thelondoncraftsmanwor...
WEBSITE: www.thelondoncraftsman.co.uk
=========LINKS TO MY GEAR========
==========MY FILMING GEAR========
amzn.to/2sqhHAS - GOPRO 8 BLACK
amzn.to/2RQh26p - SAMSUNG 128 GB MICRO SD CARD
amzn.to/2LYOqUN - APPLE MACBOOK PRO
amzn.to/2LZ9xpR - GO PRO 8 HEAD STRAP
amzn.to/2EgSs6G - FILMING TRIPOD
amzn.to/2PnDXUP - GOPRO TRIPOD AND HOLDER
amzn.to/2rNGIG5 - ULANZI SMALL LED CAMERA LIGHT
=====GEAR IN THIS & OTHER VIDEOS====
SPRAY ROOM TOOLS AND MATERIALS
amzn.to/2O7HDJp - GRACO 695 ULTRAMAX 2 AIRLESS SPRAYER
amzn.to/2LX0Ufw - GRACO 390 PC AIRLESS SPRAYER
amzn.to/34tVFuo - GRACO RAC X GUARD
amzn.to/2PRrrvO - GRACO 110 FINE FINISH LOW PRESSURE TIP
amzn.to/38CPQ0J - GRACO 210 FINE FINISH LOW PRESSURE TIP
amzn.to/2PIMQHC - GRACO 310 FINE FINISH LOW PRESSURE TIP
amzn.to/2spuWSd - GRACO 410 FINE FINISH LOW PRESSURE TIP
amzn.to/36FsKoi - GRACO 510 FINE FINISH LOW PRESSURE TIP
amzn.to/35oNj8v - SPRAY BOOTH TURNTABLE
amzn.to/36819M1 - TACK RAGS
amzn.to/30ADvq9 - SIP SPACE HEATER
amzn.to/2TyIlTz - SPRAY FILTERS ON A ROLL
amzn.to/2uTXapl - TWIN SLOT SHELVING UPRIGHTS
amzn.to/38l76H2 - TWIN SLOT SHELVING BRACKETS 10 PACK (370MM)
amzn.to/2tjUK37 - PIPE INSULATION (TO PROTECT SHELVING BRACKETS)
amzn.to/2TCfBJK - 400MM ADJ SPEED EXTRACTOR FANS
WORK SHOP TOOLS & MATERIALS
amzn.to/2XYEbp8 - PUSH RELEASE CATCHES
amzn.to/3mDf84R - NON SLIP MAT
amzn.to/38pDRo9 - KETER FOLDING TABLE
amzn.to/2LVq51Y - MAKITA ROUTER / TRIMMER / PALM - RT0700CX4 ( MUST HAVE!!! )
amzn.to/3cO8C7D - 1/4" FLUTE CUTTER
amzn.to/3cTCYW6 - 1.6MM RADIUS - MICRO ROUND CUTTER FOR 1/4" ROUTER TRIMMER ( MUST HAVE!!! )
amzn.to/39Kyezi - HITACHI 2ND FIX BRAD NAILER
amzn.to/2UIB97u - HITACHI 1ST FIX GAS NAILER
amzn.to/2R9z7em - JIGSAW
amzn.to/2V2SGWT - POWER DRILL
amzn.to/2UWDudW - MAKITA BELT SANDER
amzn.to/3dUmyxl - BOSCH CHOP/MITRE SAW
amzn.to/2YOuiK0 - MAKITA BRAD NAILER
amzn.to/2Eo6SSg - PVA GLUE
amzn.to/34pvYem - MITRE FAST
amzn.to/2POJR09 - 35MM HINGE CUTTER
amzn.to/2udA4JU - SIP 10" TABLE SAW
amzn.to/3aq2pgI - 250mm TREND 48T BLADE
amzn.to/2sDwkkL - 3M RE-USABLE DUST MASK
amzn.to/2NEWzyk - KETER FOLDING WORKBENCH (THIS IS A MUST BUY)
amzn.to/30AlVD2 - JOINTING COMPOUND FILLER
amzn.to/2TIkUqK - MAKITA ORBITAL SANDER
amzn.to/2FZe1JI - ORBITAL SANDER SANDING DISCS ASSORTED
amzn.to/2sJ6YBU - 500MM GTV SIDE MOUNTED DRAWER RUNNERS
amzn.to/37fet2y - MECHANICAL PENCILS
amzn.to/36cfo2y - 3MM WOOD AND METAL DRILL BITS
amzn.to/37gjiIL - MASKING TAPE (SKOTCH 25MM)
amzn.to/2RF1wZ4 - STANLEY TAPE MEASURE 8M
amzn.to/30DdW8a - WOOD BRADAWL ( SHARP POINT FOR MARKING HOLES )
amzn.to/37qwNpi - MAKITA COMBI & IMPACT DRILL SET 18V
amzn.to/36h7W66 - STANLEY SCREW DRIVER SET ( STANLEY FATMAX )
amzn.to/2ugisxk - COMBINATION SQUARE 400MM ( BAHCO )
amzn.to/30HwDrg - VINYL / RUBBER GLOVES
amzn.to/30Loxho - P600 SANDPAPER WET AND DRY
Cracking job.
Another nice job. the clean simple lines of your design really complement the timber frame of the house. Thanks for sharing.your work with us
Thank you, it was a very satisfying job to both make and fit. I always enjoy using birch and that was the perfect house for it
Great vid. Thanks.
Great work guys! Stunning house too. Lucky clients! Love the glue-lam beams
Thank you.
I agree, really lovely house and glue lams are amazing too!!
Nice work man, looks like that took some planning.
Thanks!
The trickiest part was getting the two upper units to look like it was all one unit, and the 2 sets of 12mm worked a treat 👍👍👍
UScribe are very good Ryan, definitely save you a lot of Time on your installs!
Very nice job lads. Attention to detail as usual. Nice house!
Peter Millards channel has a video about those scribes.
Thanks Allan!
I'll take a look, I do need to get some, they look really handy!
Top job Ryan ,really like the clean look of that unit. I’ve just started using the Trend Easyscribe Scribing Tool from tool station ,really impressed so far. Also that sonic boom was unbelievable,we heard it all the way over in Romford .
Cheers paul.
I think I'll buy one of those scribes 👍👍👍
Lovely job Ryan, have to say I’d have been bricking it getting that top unit in! Great one for the portfolio though and hopefully a healthy margin 😉. Just bought myself a uscribe jig, check them out, hopefully gonna save loads of time.
Cheers Darren, haha the top unit wasn't too bad tbh, about a minute or 2 and it was in.
Yep, we never get a chance usually to take good pics as the light disappears after 4pm!
Will defo look into those scribes for sure!!
Lovely job and house, are they having a ladder installed for the top shelves?
Thank you.
Yes I think they are looking into getting a ladder, or possibly us making a ladder 👍
Great work, as some one with a bit ocd, not having the shelves line up with the lines of the cladding on the wall would drive me insane
I get you 👍
The Cladding was a bit wonky tbh, not level in places and different size gaps between.
I think if they all.lined up then possibly wouldn't notice there was panelling behind?👍
Nice work! How do you actually secure the scribed trims and kicker to the bookshelf?
Thank you.
We just fix them through the carcass but hide the screws behind a shelf or door hinge 👍👍
@@thelondoncraftsmanworkshop makes sense now you mention it, thanks a lot!
Massive beast bookshelf. Lovely clean finish. I must be going deaf, couldn't hear the boom (single earpiece) got a timecode for it?
I used to live near Concorde factory in Bristol, booms quite frequent when at junior school in 60's. But that was nothing compared to space shuttle re-entry in Florida. 20x louder at least !!
Hi John
Thank you, yes nice clean lines and chunky feel to this one 1👍
I edited this vid with over the ear headphones 🎧 and its sounded soo loud. I just watched the vid back at the sonic boom part on my phone, and it wasn't as loud as I thought it would be.
Turn up the volume at around the 13.47 mark and it should be there.
Quite cool living near concorde ! I'd love to hear the shuttle though, might have to be on the bucket list 👍👍
I use swanky scribe which I think it's good
We go to cutting edges workshop in watford, always top quality material and cutting!
Yeah I need to buy one of those scribing tools and they probably are much quicker and less marking out
@@thelondoncraftsmanworkshop yeah they're good as come in a pack with a number of offsets. Recently got a Graco ultra and gxff but trying to find the best way to setup temporary spray booth although I'd love to be able to have a space like yours. I'm thinking of using a single 14" can then maybe making something like Peter Millard's version on a desk or maybe in a downdraft table. Also I asked previously how come you biscuit rather than Domino? Thanks Sam
Hi Ryan
Another great vid
I recently got one of the 16 inch fans to put in a small
Paint booth
How are you venting yours
Are you using a reducer
Mine got to go through a brick wall
Any suggestions
Graham
Hi Graham thank you🙏
I just cut a hole through my stud wall the same size as the fan, with just the lip of the casing screwing onto the wall 👍👍
What happened when putting the second but up 🤣 no video?
Cracking job through
I did in the smaller screen/footage, I guess i could have made that part bigger on the screen
@The London Craftsman haha ok - I thought you might have dropped it
😀
Haha no, that would have been game overtime! 😅Its trying to juggle the work and the filming whilst trying to complete the job in time, its tricky.
@@thelondoncraftsmanworkshop just seen it - well done!
Nice job lads, top workmanship and looks the business, where did you source the grey plastic door push openers Ryan ?.
Hi I think they can be found on ebay, push catches i believe 👍👍
@@thelondoncraftsmanworkshop I will take a look, cheers pal 👍
No probs, I also just added a link in the description in case. 👍👍
@@thelondoncraftsmanworkshop thanks Ryan, appreciated.
How is the client going to access the upper shelves?!
They were looking for a ladder online but if not then I could make one for them 👍
Have u built a bed base to match wardrobes?
I have once or twice, but only with a painted finish over mdf
If u do any more that would make a good video to see a brill finish