My temps are 20K more than yours for the hotspot and 10K more for the memory/edge temps. Maybe I should repaste it. Diff between hot spot and normal are 14K though, so from that perspective it looks good.
This is exactly what I was looking for, nice know stock TIM/Pads are good, didn't know if it was worth opening, and didn't wanna spend too much time tinkering. No desire now, after seeing how many, and of how many different sizes of the pads there are on the card, and cause TG-PP10 Putty is EOL, so the easy way is not there anymore. I just de-shrouded and zip-ties 2x Arctic P8 80x25mm fans with rubber anti-vibration pads and it's working ok, the card's surprisingly advanced for it's size, price. WIll switch to 2x Noctua NF-A9 PWM 92x25mm eventually once summer comes, as these Arctic are a bit whiny >1350 RPM. Ty for the video!
I am about to disassemble my sapphire rx 6600 and was worried that how to do it, will I damage it😅🙏🏻 and on the spot I found this video. Thanks. Really helpful
I'm here AFTER I ripped my fan connector cables out of the pin sockets... Now the fan connector is stuck on the PCB, with no wires inside it... But at least I got the fans off to clean it? What do I do now?!
Thanks man... I was literally just following that, and snapped one of my pins in half... So have ordered a new fan from AliExpress haha Those stupid little barbs on the connectors... Never seen those on a simple fan connector! Thanks for the tear down video though, well done!
Hi how's PCB quality of this card ? How's heatsink ?? I've heard for some review this model used only 50w cooling for this card, is it true ? and between this one vs 3060 zotac twin edge for 50$ more which way to go ?
@@user-kp2hk2lh2x Zotac is a good brand and they make great cards, but keep in mind they only make nvidia cards, so if you want AMD, it means going for another brand.
id like to upgrade to XFX - SPEEDSTER SWFT210 AMD Radeon RX 6600 Core 8GB GDDR6 PCI Express 4.0 Gaming Graphics Card will it work with my cpu AMD Ryzen 5 1600 Six-Core Processor 3.20 GHz?? thx
Hey buddy, i got 6650 xt sapphire pulse, and at stock i get like 70c edge up to 100-103c junction (144w, power limit default) and fans spins like crazy @2300+rpm. I undervolted -100mv and downclocked -100mhz Results are edge 66c junk high 80s low 90s. Fan 1600-1950rpm (my curve) I heard people like sapphire but i am quite dissapointed, way louder than my old 6600 non xt eagle gigabyte.. Fans even make some kind of resonance noise after 1950rpm... Gpu is new, 1 month old, what should i do? If i unscrew i lose warranty, is there a way to remove stickers without damagin them? There is same stickers on ali express as well.
@@galee4253 The sticker thing doesn't matter in a lot of countries. not sure what the laws are in Serbia. A 30C temperature difference between edge and hot spot is a lot... My best guess is something is loss, but it could maybe the paste is shit ... I would open it, but that's me.
@@HardwareForGamers Matters here sadly... Still searching for best way to take those stickers off without damaging, or i might just get same ones from ali express tbh. Would MX-4 be good? Yea screw is loose or paste.. Most pulses i saw 6600/6650 xt have around 90c junction with low rpm like 1200 at STOCK... What is funny is how people hate gigabyte and my eagle 6600 was cold as ice 10-15c delta diff..
Hello friend! My RX 6600 Sapphire Pulse, in stock, is reaching 115°C in the Hot Spot and turning off... I already replaced the thermalpads correctly and applied MX-4 thermal paste, but it didn't solve the problem! It heats up IMMEDIATELY when opening any game... All it takes is for its clock to go up and it reaches the temperature limit and turns off! Any tips?
@@KatiZ_Yes! I managed to solve my problem! Two of the screws that hold the heatsink to the board were not original and that's why the springs weren't tightening properly... I bought washers and put them between the screws and the springs, and it dropped by 20°C...
Thank u so much about thermal pad thickness information
Happy to help
how about the seemingly thickest rectangular one on the back? (with 1.5 mm vrm pad on it)
thanks for tearing down now i know the pads size
Glad you found it helpful.
very detail teardown, thanks
My temps are 20K more than yours for the hotspot and 10K more for the memory/edge temps. Maybe I should repaste it.
Diff between hot spot and normal are 14K though, so from that perspective it looks good.
Thanks 👍
This is exactly what I was looking for, nice know stock TIM/Pads are good, didn't know if it was worth opening, and didn't wanna spend too much time tinkering. No desire now, after seeing how many, and of how many different sizes of the pads there are on the card, and cause TG-PP10 Putty is EOL, so the easy way is not there anymore.
I just de-shrouded and zip-ties 2x Arctic P8 80x25mm fans with rubber anti-vibration pads and it's working ok, the card's surprisingly advanced for it's size, price.
WIll switch to 2x Noctua NF-A9 PWM 92x25mm eventually once summer comes, as these Arctic are a bit whiny >1350 RPM.
Ty for the video!
Did he really try to remove the heatsink,without removing the screws??
Thanks for the teardown. I have one of the exact one - and now I have the card's temp n the build data comparison video.
Great info and keep it up 👍
Glad it helped
Thank you i wonder how many heat pipe it have since i have 2 of it but lazy to open my case
So it use 1mm for memory and 1.5 for VRM :/ ok thx i just have time to watch whole video
I found 2 different vbios for this card and i wonder if it's worth flashing the updated one which was released in 2022?
I wouldn't risk it personally.
I am about to disassemble my sapphire rx 6600 and was worried that how to do it, will I damage it😅🙏🏻 and on the spot I found this video. Thanks. Really helpful
thanks, glad you found it helpful.
I'm here AFTER I ripped my fan connector cables out of the pin sockets... Now the fan connector is stuck on the PCB, with no wires inside it... But at least I got the fans off to clean it?
What do I do now?!
I know this isn't exactly the same ruclips.net/video/hdp3ZxONwno/видео.html but it's the best I could find.
Thanks man... I was literally just following that, and snapped one of my pins in half... So have ordered a new fan from AliExpress haha
Those stupid little barbs on the connectors... Never seen those on a simple fan connector!
Thanks for the tear down video though, well done!
Good evening my friend, would you still have this board? I would like to know if you could tell me the ci number u501 is next to the coil near the pci
Sorry, no
Hi
how's PCB quality of this card ?
How's heatsink ??
I've heard for some review this model used only 50w cooling for this card, is it true ?
and between this one vs 3060 zotac twin edge for 50$ more which way to go ?
I went over all that in the review ruclips.net/video/UStvVlT7CJk/видео.html
@@HardwareForGamers what's your opinion about that zotac ?
@@user-kp2hk2lh2x Zotac is a good brand and they make great cards, but keep in mind they only make nvidia cards, so if you want AMD, it means going for another brand.
What brands are the VRAM? I hope they are not using Micron.
Can you upload a teardown os the RX 6600 Eagle? Please
Sorry don't have one.
May I know what’s size for the mounting bracket
id like to upgrade to XFX - SPEEDSTER SWFT210 AMD Radeon RX 6600 Core 8GB GDDR6 PCI Express 4.0 Gaming Graphics Card will it work with my cpu AMD Ryzen 5 1600 Six-Core Processor 3.20 GHz?? thx
Yes
Asus dual best cooling for 6600
Hey buddy, i got 6650 xt sapphire pulse, and at stock i get like 70c edge up to 100-103c junction (144w, power limit default) and fans spins like crazy @2300+rpm.
I undervolted -100mv and downclocked -100mhz
Results are edge 66c junk high 80s low 90s.
Fan 1600-1950rpm (my curve)
I heard people like sapphire but i am quite dissapointed, way louder than my old 6600 non xt eagle gigabyte.. Fans even make some kind of resonance noise after 1950rpm...
Gpu is new, 1 month old, what should i do? If i unscrew i lose warranty, is there a way to remove stickers without damagin them? There is same stickers on ali express as well.
Where do you live?
@@HardwareForGamers Serbia, why?
@@galee4253 The sticker thing doesn't matter in a lot of countries. not sure what the laws are in Serbia.
A 30C temperature difference between edge and hot spot is a lot... My best guess is something is loss, but it could maybe the paste is shit ... I would open it, but that's me.
@@HardwareForGamers Matters here sadly... Still searching for best way to take those stickers off without damaging, or i might just get same ones from ali express tbh. Would MX-4 be good? Yea screw is loose or paste.. Most pulses i saw 6600/6650 xt have around 90c junction with low rpm like 1200 at STOCK...
What is funny is how people hate gigabyte and my eagle 6600 was cold as ice 10-15c delta diff..
Hello friend! My RX 6600 Sapphire Pulse, in stock, is reaching 115°C in the Hot Spot and turning off... I already replaced the thermalpads correctly and applied MX-4 thermal paste, but it didn't solve the problem! It heats up IMMEDIATELY when opening any game... All it takes is for its clock to go up and it reaches the temperature limit and turns off! Any tips?
Are the fans spinning? Have you tried using something like HWinfo to to look at voltage? Is the card new or did it just start happening?
Resolved?
@@KatiZ_Yes! I managed to solve my problem! Two of the screws that hold the heatsink to the board were not original and that's why the springs weren't tightening properly... I bought washers and put them between the screws and the springs, and it dropped by 20°C...
@@loopBicepsmine is 80°C it normal?
i wish someone release waterblock for this GPU.