Thank you. I don't have enough money and was looking for cheaper way to decorate my home for Christmas. Your diy will save me. God bless you continuously.💜
This wreath is my favorite of every wreath I have seen. I love the colors. I was going to quit because it was too expensive but now I figured I can make one for $5. get the material from dollar tree. 1.25 each roll of material. Make a wreath base with a coat hanger.
I've been making these for years. I taught my granddaughter how to make them. I use the foam wreath form, punch the holes all around, put glue in whole as we insert squares. The hardest part of this is the cutting of the squares. Sadly, because of my arthritis, I gave it up. My favorite one is the fall wreath. Great job!
I'm making a wedding gift, and I've done this before but it was a while ago and the only foam rings I could get are fairly thin so I might go at it with a crochet needle instead of a blunt pencil. My wreaths are not flat on the back and they're not as thick as the one I previously made which I was able to do the entire thing. When you do a foam wreath ring do you do the entire surrounding or am I looking at a project that's going to fall apart??
@@D.RED420 I don't use the foam wreath form that is flat on the back. What I do is use a Phillips' screwdriver (the small one) and punch the holes gently on form. Then, when I've completed 5 rows, I put glue inside 5 holes and insert fabric squares gently and continue as I go along. After all squares in, I use glitter spray (do it outdoors) and leave overnight. Next day, wreath is nice and stiff. Not sure if this makes sense.
I'm using a foam ring that is thinner than any I've ever used before, and it is not flat on the back. But I have a question, doing this as a wedding gift so there's going to be a lot put into it, but I can't start it until I can get an answer to a question that no one has been able to answer me. If you have to work with one sided cloth patterns. Do you put the colored side in face down on the wreath so you can see the outsides or do you put it, the dull/back side in first? I'm wondering if I put the colored side in first you'll only see the back side when you're looking at it so by putting the back side in first everything is next to it so when you look at it you're looking at the pattern not the back of your square. ??? I hope that makes sense and I hope you can give me an answer! I absolutely love your wreath and tutorial, it is very hard to find anyone that makes these anymore. It was so many years ago but I thought I was taught to put it colored side down because your sides will be covered and when you look at it you'll see color. I need to make this really fast. But that's the one question I'm stuck on. PLEASE HELP! Please HELP!!
Would this be good for outdoor hanging on my door? It’s a door without a storm door. No other door between the wreath. Love it. Is there a spray I can put in it. For rain and the sun? Don’t want it to be all wet and color fading. Or is there a different material that works better for outdoors.
Hello - This wreath does work better as an inside decoration. There are fabrics designed specifically for outdoors and can be found at most fabric stores. You may also want to consider a foam wreath form rather than the straw one. The straw can suffer ill effects from moisture when left outside.
Hello - Thank you so much for reaching out. For this project I wrapped the back side of the fabric around the screwdriver and pushed it in. That way the front side of the fabric was facing out, creating almost a flower bud shape. I hope this helps you.
I'm thinking you could put a dab on hot glue on the fabric to make it stay in better. I have an old red corderoy coat I want to create something for a keepsake and this looks like a good idea for it. I could hang it at Christmas and valentines time.
Just remember that Elmer's glue or fabric to foam glue is your best resort!! Unless you're adding finishing touches, a glue gun will melt your foam ring. Hope that's helpful.
@@D.RED420 yes I know... But this is NOT a "FOAM" wreath. It's a "straw" wreath. So hot glue will stick better than Elmers. Hope thats helpful for you. :-)
I have a lot of pre-cut fabric squares originally intended for quilting and they would work great for a project like this. If anyone is interested, the pre-cut squares can be purchased on Amazon. I do wonder how well this would hold up outside in the Texas humidity though. Maybe the finished wreath could be sprayed with liquid fabric starch? Has anyone tried this?
Thank you! I didn’t realize Amazon sold fabric squares! Sorry, I can’t help with the “starch” idea, though. I’ve never made one of these wreaths. I hope you found your answer. ❤ 0:08
Hello Lynne Robeck - For the 10 inch wreath form, we used 2 - 2 1/2 yards of fabric for the total wreath. You can divide the 2 - 2/12 yards between how ever many colors you wish to put in. We hope this answers your question. Thank you, Fox Lake District Library
Hello - We're so glad that you enjoyed the video! It looks like there isn't an easy way to send a picture on RUclips comments, but we did find 2 articles that show a work around www.techaccents.net/send-pictures-in-youtube-comments-box/ and www.webtechcoupons.com/how-to-send-pictures-in-youtube-comments-box/.
I received one of these as a housewarming gift. It's beautiful. Thank you for sharing.
So super cool. Thank you for showing this pretty wreath. Also, love the "Macgyver" type wreath hanger.
Thank you. I don't have enough money and was looking for cheaper way to decorate my home for Christmas. Your diy will save me. God bless you continuously.💜
Oh my goodness ! Sooooo easy ! And sooooo pretty ! I love it !
First time viewer, thank you for this tutorial, you’re an excellent teacher, so grateful. Again, thank you💗
This wreath is my favorite of every wreath I have seen. I love the colors. I was going to quit because it was too expensive but now I figured I can make one for $5. get the material from dollar tree. 1.25 each roll of material. Make a wreath base with a coat hanger.
I love it! Thank U! Well done and easy 2 learn! Very good instructor!💜
this is my favorite. I hope mine turns out as good as yours, and I love the colors.
Thank you. I used Fat Quarters for the fabric and cut it into 3x3 inch squares. And the paper clip hanger, very imaginative.
I've been making these for years. I taught my granddaughter how to make them. I use the foam wreath form, punch the holes all around, put glue in whole as we insert squares. The hardest part of this is the cutting of the squares. Sadly, because of my arthritis, I gave it up. My favorite one is the fall wreath. Great job!
I'm making a wedding gift, and I've done this before but it was a while ago and the only foam rings I could get are fairly thin so I might go at it with a crochet needle instead of a blunt pencil. My wreaths are not flat on the back and they're not as thick as the one I previously made which I was able to do the entire thing. When you do a foam wreath ring do you do the entire surrounding or am I looking at a project that's going to fall apart??
@@D.RED420 I don't use the foam wreath form that is flat on the back. What I do is use a Phillips' screwdriver (the small one) and punch the holes gently on form. Then, when I've completed 5 rows, I put glue inside 5 holes and insert fabric squares gently and continue as I go along. After all squares in, I use glitter spray (do it outdoors) and leave overnight. Next day, wreath is nice and stiff. Not sure if this makes sense.
I really like how U made that beautiful wreath with fabric! Thanks for showing It!
Thank you for taking time to show how to do a cool wreath . 😃
This is beautiful 😍 love it
Beautiful and easy enough for me to try. Thank you!
I'm using a foam ring that is thinner than any I've ever used before, and it is not flat on the back. But I have a question, doing this as a wedding gift so there's going to be a lot put into it, but I can't start it until I can get an answer to a question that no one has been able to answer me.
If you have to work with one sided cloth patterns. Do you put the colored side in face down on the wreath so you can see the outsides or do you put it, the dull/back side in first? I'm wondering if I put the colored side in first you'll only see the back side when you're looking at it so by putting the back side in first everything is next to it so when you look at it you're looking at the pattern not the back of your square. ???
I hope that makes sense and I hope you can give me an answer! I absolutely love your wreath and tutorial, it is very hard to find anyone that makes these anymore.
It was so many years ago but I thought I was taught to put it colored side down because your sides will be covered and when you look at it you'll see color. I need to make this really fast. But that's the one question I'm stuck on.
PLEASE HELP!
Please HELP!!
Hi, can I use 2 1/2 inch squares instead of 3 inch squares, with a 10" wreath?
I just made this and it is very pretty, but next time I will put glue before the materal is put on, and not the big seizors for the holes.
Beautiful!
Would this be good for outdoor hanging on my door? It’s a door without a storm door. No other door between the wreath. Love it. Is there a spray I can put in it. For rain and the sun? Don’t want it to be all wet and color fading. Or is there a different material that works better for outdoors.
Hello - This wreath does work better as an inside decoration.
There are fabrics designed specifically for outdoors and can be found at most fabric stores.
You may also want to consider a foam wreath form rather than the straw one. The straw can suffer ill effects from moisture when left outside.
I have made these wreaths for yrs.for all seasons.i would cut the fabric with pinking shers
What side of the fabric goes in first? Printed or the back side?
Hello - Thank you so much for reaching out. For this project I wrapped the back side of the fabric around the screwdriver and pushed it in.
That way the front side of the fabric was facing out, creating almost a flower bud shape.
I hope this helps you.
I'm thinking you could put a dab on hot glue on the fabric to make it stay in better. I have an old red corderoy coat I want to create something for a keepsake and this looks like a good idea for it. I could hang it at Christmas and valentines time.
Just remember that Elmer's glue or fabric to foam glue is your best resort!! Unless you're adding finishing touches, a glue gun will melt your foam ring. Hope that's helpful.
@@D.RED420 yes I know... But this is NOT a "FOAM" wreath. It's a "straw" wreath. So hot glue will stick better than Elmers. Hope thats helpful for you. :-)
I have a lot of pre-cut fabric squares originally intended for quilting and they would work great for a project like this. If anyone is interested, the pre-cut squares can be purchased on Amazon. I do wonder how well this would hold up outside in the Texas humidity though. Maybe the finished wreath could be sprayed with liquid fabric starch? Has anyone tried this?
Thank you! I didn’t realize Amazon sold fabric squares! Sorry, I can’t help with the “starch” idea, though. I’ve never made one of these wreaths. I hope you found your answer. ❤ 0:08
How many yards do you need of each fabric color. Thanks
Hello Lynne Robeck - For the 10 inch wreath form, we used 2 - 2 1/2 yards of fabric for the total wreath. You can divide the 2 - 2/12 yards between how ever many colors you wish to put in.
We hope this answers your question.
Thank you,
Fox Lake District Library
Beeeeeeutiful !
Super
Thank you !!
How do I send a pic?
Hello - We're so glad that you enjoyed the video! It looks like there isn't an easy way to send a picture on RUclips comments, but we did find 2 articles that show a work around www.techaccents.net/send-pictures-in-youtube-comments-box/ and www.webtechcoupons.com/how-to-send-pictures-in-youtube-comments-box/.