That looks so badass! Finally I found a video of this mod that did exactly what I want to do! I've done it to a Kawasaki Vulcan custom that had drag bars before but was scared to try it on my fury due to the speedo location. Thanks so much for this video and all the comments with details on past questions. I'm doing this on mine now! Hell yeah!
No problem. Again if you have the tools and just a little imagination it's super easy to do. Honestly just buy the risers, bars, and clips and should cost you no more than 150-200. The cables are what's expensive
What bar clamps did you get to fit the fury? I have an interstate that has stock bars but they are bolted directly through the triple trees with a bolt coming off the bottom of the bars. No clamps
I know you said you don’t have the bike anymore but was there any play between the handle bars and the triple tree? Or was as solid as if you had stock bars? Thanks
Love your bars! What kind are they? Where did you purchase them? I have a 2015 Fury with the Corbin King and Queen seat just need some mini apes. Thanks!
Nice work bro! Just purchased me a fury and have lots of ideas with it. One is to mount a higher handlebar. The problem is you never see anyone on their bike and never see what, in your case, 12" does to the ridding position. Care to share a picture or video with what it looks like?
Very nice bike. I test rode one yesterday and plan to buy it. Have you ridden it any great distance? If so it comfortable. And do you know the range on a tank of gas..?
I love it but it does have its pros and cons. Ill tell you this if you plan on going a long way then get another seat. That low profile seat looks awesome but after an hour or so you can start feeling it. I use mine for short rides or work and I only take it out for long stuff rarely because I have the stock seat. The tank is a little smaller but you should get a week if youre just commuting on like 7$ in gas. I made a 130 mile ride and I did have to stop and get gas once if that helps at all.
So I got my hells gate handle bars and cable extensions from means cycles. Got my risers. But does anyone know where to get extensions for wiring cables. Or how to go about it?
Wow, Been a minute since I've gotten a comment on this video. I'm glad this video is still being watched! You won't find cable extensions. You'll need to order all new cables and for the wires you can have a shop do it or do it yourself. I remember I did mine myself
@@mollboy7013 thank you so an update mean cycles sells the extended cables to fit various ape hangars heights.and that comes with speedo mount and internal wiring. You still have one of the best vids for Honda fury apes. Thanks again man.
@@kadeempalmer1663 ha ha if all that was available back when I had this bike, it would have been a lot easier to do! I did everything myself with the wiring and the speedo adaptor i built myself using the old handlebars using the equipment in a sporting good golf shop!! Haha. Thank you though!
@@kadeempalmer1663 I basically cut them at a lower portion so you couldn't see. Then I bought more wiring at Lowes. Just did some soldering together and then just used some electrical tape to cover it. I'm sure I could have used some heat seal to make it look better, but I was teaching myself how to do these things on this bike
Could you add part numbers for the bars, the riser and the cable kit? This is what I've been wanting to do but can find anybody that will give details on the parts.
Levi Stclair the bars are from road 6 customs. Just get the 12 inch. the risers you can get any 1 in risers, same with grips. the cables are at meancycles.com. you can Google Honda fury cable kits and it will come up
I cut up the original bars to take the mount off there. I then drill holes into it and then bolted a pair of bar mounts to it and the cover of the speedo went over it pretty well. If you have the tools it wasn't a difficult job actually
That Bearded Guy ha ha I'm glad you noticed. I used to sell exercise bikes that came with cup holders. I broke the chrome piece on there by accident and I guess i just had this idea to use one of those ha ha
Hi Jacob, Is this what you ordered... 12” Ape Hangers (narrow bottom) Holey Roller Bars part# r6c12n. My conversation with Seth at Road 6 Customs a moment ago gave me concern that I can't order from the website for a Honda Fury. Rather to measure and request they do a custom fabrication. But you didn't indicate in your video anything about that. He told me the knurl spacing is different on metric bikes which is true. It's not exactly 3 1/2" between the center points of the risers. The other topic he mentiioed is the bar diameter. Factory specs show OEM bar is 1 1/4" My questions for you are 1) Did you order the bars with any customization or direct from the website? 2) What diameter? 1" or 1 1/4" (extra $150 for that) Link to the bars that it appears you purchased... store.road6customs.com/12-Ape-Hangers-narrow-bottom-HOLEY-ROLLER-BARS-r6c12n.htm
Aceydubs I did order the bars from road6customs. I just ordered one inch. Honestly once you take everything off it just depends on what risers you buy. I bought one inch risers and 1 inch grips. You'll have to measure yourself for the curling but that's actually easy. Just put your risers on and then just measure the difference. It's actually pretty easy. I'm surprised by now they don't have the specifications for a Honda Fury.
Thanks. I measured the center distance between risers and it is 12cm or 4.72441". I can edit the knurls with a knurling tool. One more question... Did you order the throttle-by-wire bars?
Zeus Razor I cut up the old bars and used the bracket on there. then i drilled holes into it and attached some handlebar mounts on it. would have been a much easier job if I had a welder but with a little imagination it's not hard.
Yea as soon as the weather is nicer and raining I will post more videos. Ill get up there and show you what I did. Its not clean, but its well hidden lol
I finally bought one , brand new and I love it . Blows me away how many mods are available for the Fury.
Just saw this video. Installing the same hangers on my 2016 Fury. Nice to get an idea of what they look like. Thanks man
Would love to see a ride video, one where your buddy is watching you ride. I'm a big tall guy and I'd like to see how you look going down the road
She's a beauty, can't wait to pick mine up next week.
That looks so badass! Finally I found a video of this mod that did exactly what I want to do! I've done it to a Kawasaki Vulcan custom that had drag bars before but was scared to try it on my fury due to the speedo location. Thanks so much for this video and all the comments with details on past questions. I'm doing this on mine now! Hell yeah!
Hopefully it turned out great man
You did a good job.she looks great.
Man that’s a gorgeous bike
Unfortunately don't have it anymore lol
@@mollboy7013 that’s a shame! I’ve been looking over the Fury as a bike in the future. Would you recommend one? Anything to look for?
I just got off the phone with Burly brands and they said they don’t make custom cables for Honda fury’s
Any insight to how the Speedo is mounted to the bars?
I need help! Are these 12" road 6 customs? 1" bars? 2" risers? What are knurled at?
Ok thanks buddy for the all the info
No problem. Again if you have the tools and just a little imagination it's super easy to do. Honestly just buy the risers, bars, and clips and should cost you no more than 150-200. The cables are what's expensive
What risers did you buy. That’s my dilemma right now.
That bike need a name the black widow .🕷
When I had her it was raven
Please send me the link or information for the cables. Thank you.
What bar clamps did you get to fit the fury? I have an interstate that has stock bars but they are bolted directly through the triple trees with a bolt coming off the bottom of the bars. No clamps
They were just some I got on Amazon that fit 1" bars
I know you said you don’t have the bike anymore but was there any play between the handle bars and the triple tree? Or was as solid as if you had stock bars? Thanks
Can you post a video of you riding it? I want to see the ergonomics with those bars on there. The bike looks great! Ty!
Alejandro E. Moncada I actually don't have the bike anymore but I'm 5 11 and my arms came out straight across.
Love your bars! What kind are they? Where did you purchase them? I have a 2015 Fury with the Corbin King and Queen seat just need some mini apes. Thanks!
Zach Isberner road 6 customs. they have a lot of good stuff
Nice work bro! Just purchased me a fury and have lots of ideas with it. One is to mount a higher handlebar. The problem is you never see anyone on their bike and never see what, in your case, 12" does to the ridding position. Care to share a picture or video with what it looks like?
Arvid Andreasson how tall are you? I'm 5 10 and with 12s my bars are pretty much at my shoulder
Jacob Moll I'm 6 4, so 12" sounds like it might be the hight I'm looking for then :) Thanks for the answer and again nice bike.
How did mont the speedometer on the ape hangers ?
I made my own bracket using a piece from the old bars.
I want mine to sit just like that.. I'm trying to order the correct bars any help is appreciated
Very nice bike. I test rode one yesterday and plan to buy it. Have you ridden it any great distance? If so it comfortable. And do you know the range on a tank of gas..?
I love it but it does have its pros and cons. Ill tell you this if you plan on going a long way then get another seat. That low profile seat looks awesome but after an hour or so you can start feeling it. I use mine for short rides or work and I only take it out for long stuff rarely because I have the stock seat. The tank is a little smaller but you should get a week if youre just commuting on like 7$ in gas. I made a 130 mile ride and I did have to stop and get gas once if that helps at all.
Thanks for the info. I figured I might need another seat and 130 miles is a good range for me. Enjoy...
So I got my hells gate handle bars and cable extensions from means cycles. Got my risers. But does anyone know where to get extensions for wiring cables. Or how to go about it?
Wow, Been a minute since I've gotten a comment on this video. I'm glad this video is still being watched! You won't find cable extensions. You'll need to order all new cables and for the wires you can have a shop do it or do it yourself. I remember I did mine myself
@@mollboy7013 thank you so an update mean cycles sells the extended cables to fit various ape hangars heights.and that comes with speedo mount and internal wiring. You still have one of the best vids for Honda fury apes. Thanks again man.
@@kadeempalmer1663 ha ha if all that was available back when I had this bike, it would have been a lot easier to do! I did everything myself with the wiring and the speedo adaptor i built myself using the old handlebars using the equipment in a sporting good golf shop!! Haha. Thank you though!
You’re welcome man! How did you extend your wires tho that’s all I’m missing.
@@kadeempalmer1663 I basically cut them at a lower portion so you couldn't see. Then I bought more wiring at Lowes. Just did some soldering together and then just used some electrical tape to cover it. I'm sure I could have used some heat seal to make it look better, but I was teaching myself how to do these things on this bike
Needs a bigger tank
Could you add part numbers for the bars, the riser and the cable kit? This is what I've been wanting to do but can find anybody that will give details on the parts.
BTW, bike looks great! Makes me jealous of the black(I have red).
Levi Stclair the bars are from road 6 customs. Just get the 12 inch. the risers you can get any 1 in risers, same with grips. the cables are at meancycles.com. you can Google Honda fury cable kits and it will come up
did you have to get the knurling changed?
Levi Stclair yes. I believe it's 4.5 inches apart but definitely remeasure. all you have to do is measure from the middle of each hole for the risers
Jacob Moll did you get the standard 12 inch apes or did you do the narrown bottom for narrow front ends option?
How did you mount the Speedo in the stock location I want that exact set up what all do I need
I cut up the original bars to take the mount off there. I then drill holes into it and then bolted a pair of bar mounts to it and the cover of the speedo went over it pretty well. If you have the tools it wasn't a difficult job actually
Oh yeah and what risers did you get and where from
@@scottbraniff2588 I honestly don't remember. Just some 1 inch risers I think that cost like 75 bucks. Nothing special
Are these the road 6 customs bars for narrow front ends?!?!
Yes
Yes
please tell me where u got that drink holder at
That Bearded Guy ha ha I'm glad you noticed. I used to sell exercise bikes that came with cup holders. I broke the chrome piece on there by accident and I guess i just had this idea to use one of those ha ha
Pauvre moto...si belle si classe ! Gâchée par un guidon de mobylette
Was it difficult installing the new handlebars?
The bars themselves no. A regular pair of risers and the bars come together easily. The rest was more difficult
Hi Jacob, Is this what you ordered... 12” Ape Hangers (narrow bottom) Holey Roller Bars part# r6c12n. My conversation with Seth at Road 6 Customs a moment ago gave me concern that I can't order from the website for a Honda Fury. Rather to measure and request they do a custom fabrication. But you didn't indicate in your video anything about that. He told me the knurl spacing is different on metric bikes which is true. It's not exactly 3 1/2" between the center points of the risers. The other topic he mentiioed is the bar diameter. Factory specs show OEM bar is 1 1/4"
My questions for you are 1) Did you order the bars with any customization or direct from the website? 2) What diameter? 1" or 1 1/4" (extra $150 for that)
Link to the bars that it appears you purchased... store.road6customs.com/12-Ape-Hangers-narrow-bottom-HOLEY-ROLLER-BARS-r6c12n.htm
Aceydubs I did order the bars from road6customs. I just ordered one inch. Honestly once you take everything off it just depends on what risers you buy. I bought one inch risers and 1 inch grips. You'll have to measure yourself for the curling but that's actually easy. Just put your risers on and then just measure the difference. It's actually pretty easy. I'm surprised by now they don't have the specifications for a Honda Fury.
Thanks. I measured the center distance between risers and it is 12cm or 4.72441". I can edit the knurls with a knurling tool.
One more question... Did you order the throttle-by-wire bars?
Aceydubs no. I just had the wires extended and wrapped then zip tied them to the handlebars. The grips just didn't let the internal wiring happen
@@mollboy7013 how do you go about getting the electrical wires extended?
how did you attach the speedo to the new bars. I been looking for a setup like that
Zeus Razor I cut up the old bars and used the bracket on there. then i drilled holes into it and attached some handlebar mounts on it. would have been a much easier job if I had a welder but with a little imagination it's not hard.
+Jacob Moll nice job bro.
Zeus Razor thanks. you can find a side mount on smoking tyre garage but id rather have it on the handlebars
Can you show a close up on the speedo and the mount?
Yea as soon as the weather is nicer and raining I will post more videos. Ill get up there and show you what I did. Its not clean, but its well hidden lol
Why
Why what?
@@mollboy7013 would u ruin a beautiful bike like that
@@tomnape28 I guess everyone is entitled to their opinion but if you want to be a troll, go elsewhere