GETTING THE WIPERS TO STAY IN THE UPRIGHT POSITION.. For my 2014 X3 wipers to stay in the vertical position I had to do these steps. 1. Press the on/off button WITHOUT your foot on the brake. 2. Press the on/off button again to turn accessories and car off. 3. Hold the wiper lever up all the way for 3 seconds, wipers should go up and stop in vertical position. 4. After changing wipers hit the on/off button and hit the wiper lever down to set the wipers in normal position.
I just need to comprehend what kind of connection point is that called. Side tab, top lock, or slim top lock. It is definitely not a j hook... Please help! 😅 I suspect it is a "side pin"
2016 X3: 1. Unlock vehicle; 2. Depress the ignition switch once WITHOUT placing a foot on the brake; 3. Engage wiper controls by pushing/pulling fully upward and holding until wipers activate into vertical position.
I wish they would take this down and redo it the correct way to keep the wipers in the up position. Follow what the first comment is. He outlines the steps.
This did not work for me. Here’s the procedure I followed: 1) Enter the vehicle 2) Start the engine 3) Wait about 10 seconds, then turn off the engine 4) Exit and lock the vehicle 5) Unlock it 6) From the driver’s seat, lift (not pull) the steering column wiper lever for a few seconds, until the wiper arms move and stay in the upright position. Then you’ll be able to lift the wiper arm and turn the blade for removal and replacement.
These wiper blades can be ordered here:
www.heynershop.co.uk
or on Amazon - just type: Heyner wiper blades and your car make and model
GETTING THE WIPERS TO STAY IN THE UPRIGHT POSITION..
For my 2014 X3 wipers to stay in the vertical position I had to do these steps.
1. Press the on/off button WITHOUT your foot on the brake.
2. Press the on/off button again to turn accessories and car off.
3. Hold the wiper lever up all the way for 3 seconds, wipers should go up and stop in vertical position.
4. After changing wipers hit the on/off button and hit the wiper lever down to set the wipers in normal position.
THANK YOU!!!
Worked for my 2013 X3
Thank you! Never would have figured that out.
Thanks!!
Worked on my 2011. You’re a legend!
2016 X# - according to the manual - manually move the wipers up into the vertical position. Then do this procedure.
Very helpful, worked great on my 2017.
Setting wipers to service position, as shown here, doesn't work on my 2013 F25. Is there another method?
StuBeeDoo I can slightly pull it to the side before lifting it so that it doesn’t catch the hood (engine is off).
I just need to comprehend what kind of connection point is that called. Side tab, top lock, or slim top lock. It is definitely not a j hook... Please help! 😅 I suspect it is a "side pin"
@@angelasturorentals hi yes it is side lock fitting
where can i get these in India>>>>>>online site please
2016 X3:
1. Unlock vehicle;
2. Depress the ignition switch once WITHOUT placing a foot on the brake;
3. Engage wiper controls by pushing/pulling fully upward and holding until wipers activate into vertical position.
YOU forgot The REAR Wiper?
I wish they would take this down and redo it the correct way to keep the wipers in the up position. Follow what the first comment is. He outlines the steps.
what did you do with the fob, did you lock or unlock the car? Is the power on or off?
False...2016 doesn’t engage the wipers using this method.
justice4everybody thanks. I though I was going crazy.
Mine from 2015 works
This did not work for me. Here’s the procedure I followed:
1) Enter the vehicle
2) Start the engine
3) Wait about 10 seconds, then turn off the engine
4) Exit and lock the vehicle
5) Unlock it
6) From the driver’s seat, lift (not pull) the steering column wiper lever for a few seconds, until the wiper arms move and stay in the upright position.
Then you’ll be able to lift the wiper arm and turn the blade for removal and replacement.
Merci pour la vidéo
Thxs !
Thx
👍👍
Tnx 👍
Visit Heyner shop: bit.ly/3PsqmZY
Doesn't give good directions