Building a 3D Gyroscope Sensor Setup! (Scrap Mechanic
HTML-код
- Опубликовано: 13 фев 2018
- Hey everyone back again in Scrap Mechanic with another tutorial build! Today we are looking at a 3D gyroscope sensor setup as shown in the hovercraft vehicle stream! A lot of people were asking how to create one of these tilting sensors for themselves so I decided to make a video showing a 3D setup with auto stabilisation!
Workshop:
steamcommunity.com/sharedfiles...
-------------------------------------------------------------------------------------------------------------
About Scrap Mechanic:
store.steampowered.com/app/387...
-------------------------------------------------------------------------------------------------------------
Music:
Anikdote [NCS Release]
• Video
No Copyright Sounds Release
Daily Beetle, Funky Chunk, Matts Blues, Protofunk
Kevin MacLeod (incompetech.com) 
Игры
Sorry for the late upload everyone. For some reason the first version of this video was taking hours to process so I had to re-upload.
BTW this isn't a new concept but a lot of people were asking for a simple build video to show how it works. Hope you enjoy! :D
weird
lol got an engineering degree and now is a youtuber *slow clap*
Thanks soo much Kan !!!!!
Kan I am a RUclipsr 2 and I did a video with my girlfriend and It toke a week to upload
steamcommunity.com/sharedfiles/filedetails/?id=1302781285
it's not much but maybe you can get some ideas from it
you're the master of this game
Yes he is
Build a hover station with a gyro on it so if you land it will push down the whole ship instead of that one corner, also counter that force that pushes down with thrusters (try your best to counter it exactly)
You have a Degree in Engineering? That'd explain why your designs are always so interesting and awesome
Thank you for the help! Loved the illustration, definitely gonna use this method in some of my future creations!
I have an idea for a creation for you. I tried to do this but I had no idea how to make a gyro so now I am asking you. Try to create a flying creation that flies like a TIE Fighter that you can use to do barrel rolls. My idea was to detect the fighter's angle and adjust which thrusters are used to keep it in the air.
- Can you make coaxial helicopter (ex: Ka-25) where rotor blades will act as gyro?
With *autopilot* (balance roll, hold pitch, heading and altitude) and *landing* (hold everything) mode
- Sometimes acceleration is used like "fake" gyro in mobiles, can you make accelerometer? with arm and spring as soft as gravity, and when helicopter start to fall/raise it will try to keep steady?
- Can you make coaxial helicopter (ex: Ka-25) where rotor blades will act as gyro?
With *autopilot* (balance roll, hold pitch, heading and altitude) and *landing* (hold everything) mode
- Sometimes acceleration is used like "fake" gyro in mobiles, can you make accelerometer? with arm and spring as soft as gravity, and when helicopter start to fall/raise it will try to keep steady?
Thanks for explaining gyroscopes!! I always wanted to build one in Scrap mechanic.
How come you are the only RUclipsr I know whos EVERY NEW VIDEO gets me hyped?? haha
Big love Kan!
I love how he always makes it into a learning experience but its a fun one.
Noscoping stones
This is why physics is amazing and "phun"!
Pun intended.
Lightmaster8 algodoo is a new physics game (phun is the older version)
there's a cool program with that name. its now called algodoo
Look steve have channel!
ruclips.net/video/jj4GaEZaZvE/видео.html
Ivan James Gaming and Speed3r do you have account links to your algobox?
Here is mine: www.algodoo.com/algobox/profile.php?id=23364
i havent actually made anything so theres no point sorry
2:48
Me in my head:right back at ya buckeroo
I love this Kancept!
This clearified so much!!!!!! Thank you!!! :D
Very awesome thanks for sharing 👍🏻
kAN: this is the best way to orient your creation!
orient block and x-o-meter: *I'm about to end this mans whole career*
1:20 it's called reaction wheels. Gyros in spacecrafts are used as navigational tools for the avionics interface to be able to tell the orientation in the 3 axis and adjust the yaw, pitch and roll. They're also used in airplanes and helicopters.
Great Video!
so on your first demonstration with the arm with the spinning object on the end if you were to make one on the other side of it going the opposite direction the arm wouldn't move sideways?
Why did you put the 2 small fast spinning things on it? Wouldn't it work without them?
Look up videos of gyroscopes, they dont do anything without spinning
I learned a lot hear. Thanks!
I loved this vid and i also love science
I always understood the principle of gyroscopic stability like spinning a weight on a rope. In order to change what way the weight is spinning, at some point in it's spin it'll have to drastically accelerate. The inertia/momentum of the weight fights against that force as it's already under a constant acceleration, the very same that causes the centrifuge effect.
In this instance, the weight is every point of the spinning body that has mass (so all of it) so no matter when or how you try to tilt it, you need to sharply accelerate part of that mass. Therefore, until a sufficient torque/force is applied to provide that acceleration, the gyro will remain in the same plane. Trying to actively force a gyro tilt across it's rotation will result in that same required force being applied back onto the acting body in equal/opposite forces.
Nerd up. :P
I built a flying selfstabilizing aircraft with this idea, when the game first came to steam, and i used spring dampened thrusters to keep the thing stable etc. worked great, but at some point, they changed something and it didn't work well anymore...
was amazing to fly and easy to land ...
Woah you sound very sick man
very interesting, but its huge.
How would you incorporate this into a smaller vehicle?
Have been watching all the cool math and science based build 🤩🤩🤩 although I a am med student , planning to get the game just for the fun of the engineering aspecy
Is there a way to make free floating pistons with and without sensors
I tried to develop a Control Moment Gyroscope in SM, and it kinda worked, but only if there was no weight whatsoever.
What I really want is a gyroscope that can detect the angle of the craft at any angle (including almost upside-down) and correct. The problem with most gyroscopes (including ones I've made) is that once it passes the sensor, you'll never be able to correct it.
With the modpack you could use smart sensors and measure the distance
Couldn't you have the bottom spinner weighted so if it does go off center via a bump or something, the natural extra weight on the bottom spinner should right itself?
Smart + games = Scrap Mechanic.
this is so interessting
So what’s happening with the hover tank
Thank you Kan! Now i understand 100% at how to do a gyro!
Where are the tutorial videos or are not going to make them any more?
Kan: says really complex physics
Also Kan: it’s really quite simple
Thanks man you re better than my teacher
I honestly think you should have more subscribers
Btw great explanation!!!
Honestly, whenever i try to make a flyer, Even with a brent batch stabilizer, it still tilts.
Even slightly.
I'd prefer it just be locked horizontally.
Like, it can still turn and stuff, but it can't tilt ever.
This vid melted my brain
Kan are you almost done with the hover bus?
What's the difference between gyroscopes and reaction wheels?
Nice
him 470 What’s nice?
The video in general
No its not nightbot
How do you make one that prevents rotation?
Never played the game, but it looked like it worked just fine without the gyro! Also, you only have a one axis gyro, the yaw axis has no gyroscopic stabilisation!
MATH? SCIENCE?!! THIS IS MY KIND OF VIDEO...👌
This is why helicopters fly stable on a rc or real life when u stop titling and stop the yaw it tries to stabilize so that’s how they made drones that’s cool
i like how you said vehicle, vehickle
the action reaction thing is a 3rd rule of Newton dinamiks i think but i am not sure becouse my science teacher didnt say much about it jus if i punch somethink i will fill the pain
How you wielding two bearing , i can't
Can u make a car sensor? When sensor detected something it automatically stops
For some reason, when I did the counter rotation (connected the bearings opposite to the other ones), the bearings wouldn't rotate, or just rotate very slowly. Anybody know why?
Same problem here. I think it's my computer having problems. I have less than minimum system requirements.
Challenge idea: Make a cargo car that drives itself to a diffrent spot depending on the color of the cargo
Question: Can this keep a creation fixed in mid air?
No, it balances it.
There is also an electric gyro scope in recent helis
In real life there are used in some airplane instruments. Such as an attitude indicator or turn coordinator.
So that's why helicopters have a tail, to counter act the force of the main router.
I am very confused all of that went right over my head maybe that’s cuz I’m short
1. Stabilize
2. Always up thrust
3. Angle controller
This is all the type of gyros that I know.
Can you send a list of all your mods???!
Hey kan can u explain what a artificial horizon is
Mr Suti and his budy not harry potter Larry otter something planes use to see where the horizon is, so they can fly in bad weather, and so they can see the angle when they land
Ok thanx
So that’s how camera gimbals work
I Like Science too
While it should never be able to reach this point with that rig, it will suffer from gimbal lock of it goes to far on one axis.
I still dont know how to make this work in flying creation becous this works just whit buttons and engins
Luv u kan
Omg, can you please make a flying vehicle with a gyro ?? :o
Objects with speed tend to be more stable. Correct me if I'm wrong.
0:37 the tilt because if you are doing a turn to the right the plane tilts clockwise and it is not because scrap mechanic
2:39 neuton's third law
wow
0:58 ME 2!!!!
i cant get it to work :(
Do 100k special
physic lesson :o
For very action there is and opposite and equal reaction. Newtons 3rd law of motion
6:15 how to do that?
Hold Left click and drag
You should start making diagrams for when your explaining things ;)
*a wild Neko has appeared*
That famous saying issac Newton’s first law of motion
*Thousand like! :^)*
Why is your profile private? I can't find any of your creations.
This o k just got home
do a tiny gyroscope pleas
Like a weelie
What happened to stationeers
Still playing it :D New video tomorrow actually I know it has been a while :(
The first demonstration is just torque.
tiberiusmkay
Oh hun, you're having trouble aren't you?
tiberiusmkay shall I explain?
Man.
kAN.
You could upload physics videos.
I think it would make learning physics fun.
Hmm....
If only schools would use games to make students learn things.
Physic lesson with kan
who saw the kido code ad?
dont need it. all we need is mods and scrap mechanic...right?
I have tried making a gyroscope to make a hovercraft, and I'm absolutely failing. I'm using vanilla game, no mods, and I'm just horrible. I will need to keep trying until I get it right, but I don't think it's normal for a person to take 3+ days to make one simple thing such as me. XD
If you are struggling try making it bigger first :D Bigger gyros done this way are much easier to balance.
@@kANGaming that's a good idea, thank you, I have to try it out soon. Thank you for replying, I didn't expect it, and so quick too! While I'm watching you and kosmos vids I got a notification. XD
(Edit: I gave it a shot, got it working, but now I have come across another pinch. The gyroscope itself, one part of the gyroscope seems to spin faster than the other, making my build spin as well. But it's definitely stable now!)
(Edit 2: apparently my thrusters are the culprit behind this. I need to find a better angle to fix it. XD)
(Edit 3-5: haha the struggle is real, I have been at it for hours/day(s) to make a working flying vehicle with thrusters and gyroscope.)
My brain hurts
Hi
hai
0:36 ahomhda
This video taught me more than chemistry class
ummm?????? what my brain got smacked
The real first like
Did anyone notice he said veh'h'icle
Search : fortnite but with robots because it is a great video
ANTS
Did you get that from YIAY?
I thought gyros are Greek food