Great video. I have the same kayak and tranport with a pickup. I've ordered a winch and have started constructing the ramp. Thanks for the design and idea of launching the kayak.
Thanks! Glad you found it helpful. I don't know what type of winch you ordered but the black control box on the harbor freight ones are not water proof. So I wired in a plug so I could keep the box inside the truck until I want to use it. Hope that helps.
No problem! Glad you like it. Yeah I thought about maybe in the future do another one out of aluminum with some rollers. That's definitely a good ideal.
Great video, I have been wanting to do this, but this is the 1st video I have found for the winch mounting that did not involve welding or taking the winch on and off each time you use it.
Thanks! Yeah I tried to keep it simple as I could without doing anything major to the truck bed. I'm still loving this setup. Still using it everytime I go. Only thing is that little black box that controls the winch is not water proof. Found that out the hard way. I zip tied it to the top of my battery and keep it in the truck until I want to use it now.
I am very interested in the wench assembly. I have a Hobie PA 12 that weighs around 120lbs with minimal loading of gear. that would be nice. thanks for sharing!
Great idea. I had that thought, but wasn't exactly sure how to go about mounting it to the bed of the truck. I was/am very hesitant to drill holes in the bed, just because I don't want to start a rust disaster. But, short of what you said, and maybe using some longer wood for the ramp, this looks like it turned out incredibly well. A fully loaded yak is heavy. And, for the guys who won a Hobie, you damn-near need a trailer.
Thanks! Yeah it toke some thinking and some playing around to get it to work but definitely worth it to me. I didn't like drilling the holes in my bed either but had to be done to make it work. I've always hated loading and unloading everything out and in the kayak at the boat ramp. Just takes so much time. This way I can leave most of the heavy things in the kayak all the time. My kayak setup weights around 180ish. And like you said that's light compared to a hobie or bonafide. I'd definitely want this setup if I had one of them.
@@ARKAYAKFISHING Amen...glad you stuck with it. It's given me some ideas. I would think that some rubber gaskets may even solve any potential rust problems from the holes. You're good-to-go as long as no water touches the unfinished metal. I was able to solve the storage problem, when I built a stand for it, that was the same height as my truck bed, so it just slid right on and off at home. But, launching it into the water was a different story. Without a system like your's you really only have one option. I know first hand how hard these videos are to make (few people know what even s simple video involves). So, thank you again for sharing, I think you helped a lot of people.
@@phillamoore157 yeah didn't think about the rubber washer. Could use some clear silicone too. I'll probably go back and do mine like that. Thanks for the ideal. Lol yeah people think youtube videos are easy until they try it for themselves. I really appreciate the support and glad I could help out! 👋 Happy fishing! 🎣
@@ARKAYAKFISHING Actually...the silicone idea is better, and faster. Go with that option. You definitely don't want any rust to start eating away at those holes. 👍
Thanks! I've been using this setup now for months and love it. I'll never go back to doing it any other way. People at the boat ramp always think it's the coolest thing ever. I did put boat carpet on the center runners. Seems like it helps. PVC might be better for the center. Be real slick for the kayak to go up and down on. I'd definitely make the ramp longer for that kayak. Probably 10 to 12 foot.
Thanks for watching! Hopefully this setup can help get you back out on the water. It's made life alot easier getting it in and out of the water for sure. Happy fishing! 🎣
Problem is is still have to launch at the ramp. One of the nice things about a kayak, is you can ( should be able to) launch just about any where. Here we just park in a parking lot and wheel them down to the lake. The boat ramps here you sometimes have to wait 3-4 hours or more. In fact many boaters turned around and went home or else where on Father’s Day because the wait was so long. This is the biggest reason we sold our boats and got kayaks.
so do you just leave it hanging out the back of the truck while you're fishing? I was thinking of something like this as well...was thinking it would also help support the boat while it is in the bed, I have an Unlimited NuCanoe (12'6") and my truck has a 6ft bed...wonder if I can make it shorter and just leave it in the truck.
I shut the tailgate with it up in the air. I put a lock and chain on it so nobody can borrow it. This one's 8ft total. You might beable to go shorter if you don't have a trolling motor on the front. One thing I did have to change is the little black control box that controls the winch. That black box is not water proof. I now zip tie it to the top of my 12v 12ah lithium battery.
Awesome setup! Getting my pickup tomorrow and this is exactly what I'm doing for my fully rigged CM110. Have a question though. Do use a bed extender at all or just the winch to secure it in place while your driving?
Thanks! Glad you like it. When I'm traveling I leave the winch hooked to the back of the kayak and I put the ramp about half way under the kayak. Then I just put one ratchet strap across the bed over the kayak holding it down tight. Never had it move at all doing that. Let me know how it goes once it's set up.
Well done, sir. I’m curious is it easy to pull the ramp out from under the kayak when traveling? Also, is it difficult to push it under the kayak once it’s loaded? My kayaks about 120 pounds naked.
Thanks! My kayak weights around 120 with battery chair and black pak. I load my kayak on top of the ramp from my kayak cart. But I don't put the ramp completely under the kayak. Only about half way under. When I get to the parking lot first thing I do is pull the ramp out as far as I can before adding the trolling motor and all my other gear. That's pretty easy. Then when I back down the boat ramp to unload it. The ramp mostly is already pulled out so that parts pretty easy. When I load the kayak after I'm done fishing. I'll load it up. Then I only push the ramp under the kayak just enough to keep it from falling out as I'm going back up the ramp to the parking lot. That's also pretty easy. Then after taking all my gear out and trolling motor off then I'll finish pushing the ramp under the kayak. This is alot to remember but if you do it like this it's pretty easy both ways. And once you get it down it's like clock work. I bring a small stool with me to help get in and out of the bed of my truck so I don't have to climb up and down to load some of my gear. You'll love it once you get it all down. I've been using it for close to a year now and love it. The boat carpet on the ramp does help some too. Hope that helps. Happy fishing 🎣
manuals.harborfreight.com/manuals/61000-61999/61840.pdf If you buy the harbor freight winch it's very simple. Just black and red to the battery. I moved the black control box and zip tied it to the top of my battery. When you do that you'll just lengthen the wires some. But the wiring remains the same. Just red to red. Black to black. Very simple and straightforward. Hope that helps. 👋
@@ARKAYAKFISHING thanks for getting back to me. I pretty much have the same winch except mine is the 3500.. Do you have to ground any wires at all? Also, is the remote something you buy separately?
Your welcome. The 2500 comes with the remote when you buy the winch. I'm not sure if you can get a remote for the 3500 one. But no. Just wire the black to the ground on your battery and red to positive.
I was using a lawn mower battery but then I down sized to alittle 12ah lithium battery. It doesn't use much power because the winch isn't really under a load.
@@thebug53 I keep it under the kayak. I push it about half way under the kayak so it's easy to get it in and out. I did put boat carpet on my center runner's. Makes it alittle easier.
@@mikemckee2133 I appreciate that! Glad it helped out. Only thing is after filming this video. I found out that the little black box that controls the winch is not water proof. It looks water proof but it's not. You'll want to silicone it shut or put it inside something that's water proof. Good luck and happy fishing!
I don't know what truck you have or how your beds set up but the winch setup can definitely be lower down. It doesn't have to be at the top of the bed. If your truck bed has the tie down anchors lower you might be able to remove them and use those holes to mount it to. Just trying to give you some ideals to think about.
Hope you have a good and quick recovery from your surgery. Everything is holding up great. Only thing I found out is that the little black control box for the winch is not water proof. So I zip tied it to the top of my battery and keep it in the truck. This setup has made my back happy. Good luck happy fishing 🎣
I have a trailer for my 133x but yeah you could also make this work for the 133x too. Only thing is you'd have to load it front first because the back is very flat on the 133x. And have to build a longer ramp. Probably use 12ft long 2x4s instead of the 8ft ones.
Do you still use this or have this kayak? I Didn’t know if you have upgraded anything else since the trolling motor. Getting my catch mode 110 next week
@@BrandonHughes-g7m yeah I still use this setup everytime I go fishing. I did add some boat carpet to the center 2 runners. And I moved the black winch control box and put it on top of my battery. Found out it's not water proof. I did change the rudder on the back. Made an all aluminum setup.
@@ARKAYAKFISHING just got me a 33pound thrust minn kota trolling motor and will be using your video to help me build the similar set up. Hopefully it goes well. Just looking for the parts you used
Great video. I have the same kayak and tranport with a pickup. I've ordered a winch and have started constructing the ramp. Thanks for the design and idea of launching the kayak.
Thanks! Glad you found it helpful. I don't know what type of winch you ordered but the black control box on the harbor freight ones are not water proof. So I wired in a plug so I could keep the box inside the truck until I want to use it. Hope that helps.
Thanks for this! I may do a variation of this and put rolling cylinders or wheels on it.
No problem! Glad you like it. Yeah I thought about maybe in the future do another one out of aluminum with some rollers. That's definitely a good ideal.
Great video, I have been wanting to do this, but this is the 1st video I have found for the winch mounting that did not involve welding or taking the winch on and off each time you use it.
Thanks! Yeah I tried to keep it simple as I could without doing anything major to the truck bed. I'm still loving this setup. Still using it everytime I go. Only thing is that little black box that controls the winch is not water proof. Found that out the hard way. I zip tied it to the top of my battery and keep it in the truck until I want to use it now.
I am very interested in the wench assembly. I have a Hobie PA 12 that weighs around 120lbs with minimal loading of gear. that would be nice. thanks for sharing!
Thanks! I'm glad you found it interesting. It definitely makes loading and unloading it alot easier. Happy fishing 🎣
Great idea. I had that thought, but wasn't exactly sure how to go about mounting it to the bed of the truck. I was/am very hesitant to drill holes in the bed, just because I don't want to start a rust disaster. But, short of what you said, and maybe using some longer wood for the ramp, this looks like it turned out incredibly well. A fully loaded yak is heavy. And, for the guys who won a Hobie, you damn-near need a trailer.
Thanks! Yeah it toke some thinking and some playing around to get it to work but definitely worth it to me. I didn't like drilling the holes in my bed either but had to be done to make it work. I've always hated loading and unloading everything out and in the kayak at the boat ramp. Just takes so much time. This way I can leave most of the heavy things in the kayak all the time. My kayak setup weights around 180ish. And like you said that's light compared to a hobie or bonafide. I'd definitely want this setup if I had one of them.
@@ARKAYAKFISHING Amen...glad you stuck with it. It's given me some ideas. I would think that some rubber gaskets may even solve any potential rust problems from the holes. You're good-to-go as long as no water touches the unfinished metal. I was able to solve the storage problem, when I built a stand for it, that was the same height as my truck bed, so it just slid right on and off at home. But, launching it into the water was a different story. Without a system like your's you really only have one option. I know first hand how hard these videos are to make (few people know what even s simple video involves). So, thank you again for sharing, I think you helped a lot of people.
@@phillamoore157 yeah didn't think about the rubber washer. Could use some clear silicone too. I'll probably go back and do mine like that. Thanks for the ideal. Lol yeah people think youtube videos are easy until they try it for themselves. I really appreciate the support and glad I could help out! 👋 Happy fishing! 🎣
@@ARKAYAKFISHING Actually...the silicone idea is better, and faster. Go with that option. You definitely don't want any rust to start eating away at those holes. 👍
Good job.
Nice job. Looking for load options for my motorized Native Slayer 13. I might do something similar using PVC.
Thanks! I've been using this setup now for months and love it. I'll never go back to doing it any other way. People at the boat ramp always think it's the coolest thing ever. I did put boat carpet on the center runners. Seems like it helps. PVC might be better for the center. Be real slick for the kayak to go up and down on. I'd definitely make the ramp longer for that kayak. Probably 10 to 12 foot.
Thanks for the video I have a bad back and haven’t taken my kayak out because I can’t lift it
Thanks for watching! Hopefully this setup can help get you back out on the water. It's made life alot easier getting it in and out of the water for sure. Happy fishing! 🎣
I was going to build something like this ,thanks for your input ,great idea
Thanks! 👋
This is exactly what I want to do! Great job sir!
Thank you! 👋
I would ad floatation at the bottom so no need for longer ramp. Great job.
Thanks!
great idea.. my only question is do you just slide the ramp under the kayak after you load the kayak...?
Thanks! Yeah I just keep the ramp under the kayak about half way. I did end up putting boat carpet on the center two runners. Makes it alittle easier.
Problem is is still have to launch at the ramp. One of the nice things about a kayak, is you can ( should be able to) launch just about any where. Here we just park in a parking lot and wheel them down to the lake. The boat ramps here you sometimes have to wait 3-4 hours or more. In fact many boaters turned around and went home or else where on Father’s Day because the wait was so long. This is the biggest reason we sold our boats and got kayaks.
so do you just leave it hanging out the back of the truck while you're fishing? I was thinking of something like this as well...was thinking it would also help support the boat while it is in the bed, I have an Unlimited NuCanoe (12'6") and my truck has a 6ft bed...wonder if I can make it shorter and just leave it in the truck.
I shut the tailgate with it up in the air. I put a lock and chain on it so nobody can borrow it. This one's 8ft total. You might beable to go shorter if you don't have a trolling motor on the front. One thing I did have to change is the little black control box that controls the winch. That black box is not water proof. I now zip tie it to the top of my 12v 12ah lithium battery.
really cool setup..:) good job. and thanks for showing us....lol
Thanks for watching! I'm always trying to share things that make Kayaking alittle easier lol
Great idea and execution! Can you give me an estimate on how heavy the ramp is?
Thanks! Ramp weights about 15 to 20lbs
love the set up
Thanks!
Awesome setup! Getting my pickup tomorrow and this is exactly what I'm doing for my fully rigged CM110. Have a question though. Do use a bed extender at all or just the winch to secure it in place while your driving?
Thanks! Glad you like it. When I'm traveling I leave the winch hooked to the back of the kayak and I put the ramp about half way under the kayak. Then I just put one ratchet strap across the bed over the kayak holding it down tight. Never had it move at all doing that. Let me know how it goes once it's set up.
Well done, sir. I’m curious is it easy to pull the ramp out from under the kayak when traveling? Also, is it difficult to push it under the kayak once it’s loaded? My kayaks about 120 pounds naked.
Thanks! My kayak weights around 120 with battery chair and black pak. I load my kayak on top of the ramp from my kayak cart. But I don't put the ramp completely under the kayak. Only about half way under. When I get to the parking lot first thing I do is pull the ramp out as far as I can before adding the trolling motor and all my other gear. That's pretty easy. Then when I back down the boat ramp to unload it. The ramp mostly is already pulled out so that parts pretty easy. When I load the kayak after I'm done fishing. I'll load it up. Then I only push the ramp under the kayak just enough to keep it from falling out as I'm going back up the ramp to the parking lot. That's also pretty easy. Then after taking all my gear out and trolling motor off then I'll finish pushing the ramp under the kayak. This is alot to remember but if you do it like this it's pretty easy both ways. And once you get it down it's like clock work. I bring a small stool with me to help get in and out of the bed of my truck so I don't have to climb up and down to load some of my gear. You'll love it once you get it all down. I've been using it for close to a year now and love it. The boat carpet on the ramp does help some too. Hope that helps. Happy fishing 🎣
Just curious how you wire the battery to the winch. If you can show me a diagram, I would really appreciate it. Thanks!
manuals.harborfreight.com/manuals/61000-61999/61840.pdf
If you buy the harbor freight winch it's very simple. Just black and red to the battery. I moved the black control box and zip tied it to the top of my battery. When you do that you'll just lengthen the wires some. But the wiring remains the same. Just red to red. Black to black. Very simple and straightforward. Hope that helps. 👋
@@ARKAYAKFISHING thanks for getting back to me. I pretty much have the same winch except mine is the 3500.. Do you have to ground any wires at all? Also, is the remote something you buy separately?
Your welcome. The 2500 comes with the remote when you buy the winch. I'm not sure if you can get a remote for the 3500 one. But no. Just wire the black to the ground on your battery and red to positive.
@@ARKAYAKFISHING ok thanks. I'll see if that works.
Does the ramp slide under for transport? No problem ?
Yeah I useally just push it under the kayak when I'm traveling
Oh, and I forgot what size battery do you need to power something like that?
I was using a lawn mower battery but then I down sized to alittle 12ah lithium battery. It doesn't use much power because the winch isn't really under a load.
Really cool idea
Thanks! 👋
Great job!
Thank you!
what do you do with the ramp after you load the kayak?
I push the ramp under the kayak about half way. Then put a strap across the kayak holding it down.
Where do you put the ramp wh n traveling
@@thebug53 I keep it under the kayak. I push it about half way under the kayak so it's easy to get it in and out. I did put boat carpet on my center runner's. Makes it alittle easier.
What do you do with ramp once it's loaded?
I push the ramp under the kayak once it's loaded and when I'm traveling.
where do you put the ramp when traveling?
I push it under the kayak
@@ARKAYAKFISHING Thank you, I bought a wich like yoursand was looking for a waay to use a ramp myself. Thanks for the great idea.
@@mikemckee2133 I appreciate that! Glad it helped out. Only thing is after filming this video. I found out that the little black box that controls the winch is not water proof. It looks water proof but it's not. You'll want to silicone it shut or put it inside something that's water proof. Good luck and happy fishing!
I like the idea, but the semi-permanent install of that winch would interfere with my truck camper.
I don't know what truck you have or how your beds set up but the winch setup can definitely be lower down. It doesn't have to be at the top of the bed. If your truck bed has the tie down anchors lower you might be able to remove them and use those holes to mount it to. Just trying to give you some ideals to think about.
Thanks for the tip, didn't even give that a thoght
No problem. I didn't either until mine started acting up
Just bought a cheap winch after seeing this video for my pdl, had neck surgery 6 months ago. How is it holding up?
Hope you have a good and quick recovery from your surgery. Everything is holding up great. Only thing I found out is that the little black control box for the winch is not water proof. So I zip tied it to the top of my battery and keep it in the truck. This setup has made my back happy. Good luck happy fishing 🎣
@@ARKAYAKFISHING just put the wench on my truck, works perfectly! Thanks for making this video brother!
Love hearing that man! Glad you like it! 👋
Brilliant.
Thank you Sir 👋
Would that work with your 133x
I have a trailer for my 133x but yeah you could also make this work for the 133x too. Only thing is you'd have to load it front first because the back is very flat on the 133x. And have to build a longer ramp. Probably use 12ft long 2x4s instead of the 8ft ones.
Do you still use this or have this kayak? I Didn’t know if you have upgraded anything else since the trolling motor. Getting my catch mode 110 next week
@@BrandonHughes-g7m yeah I still use this setup everytime I go fishing. I did add some boat carpet to the center 2 runners. And I moved the black winch control box and put it on top of my battery. Found out it's not water proof. I did change the rudder on the back. Made an all aluminum setup.
@@ARKAYAKFISHING just got me a 33pound thrust minn kota trolling motor and will be using your video to help me build the similar set up. Hopefully it goes well. Just looking for the parts you used
@@BrandonHughes-g7m that's great! Hopefully it'll go smoothly. I linked most of the parts down in the video description. I got the aluminum on ebay.
Please, take my money! 🙂
🤣 you could use a setup like this on that pwr 100 too. Been using this setup for close to a year now. Love it
You need to patten that thing!! Lol
Ain't that the truth! 🤣
Great to load up a 🦌
Yeah. Didn't think about that
I need one …..