holy shit the pronounciation from this lovely guy for the term zündwinkeleingriff @ 14:59 was superb, i actually thought he was german for a second xD Edit: ok he is german i guess since the whole interface on the pc is german haha
Hey, i got a cold air intake on my 328i and the car runs fine when the maf sensor is unplugged but when i plug it in the car misfires on every cylinder. What do you think it could be or what can i do to fix it?
Great car and tuned. Do u balancing your crankshaft ? , arp head stud ? , upgraded intercooler? Upgraded wastegate actuator? Forged conrod . And your turbo if can. Go for hybrid forged as well. Because i saw you have wossner piston .
Thanks! Crankshaft has been balanced, Sleeved Cylinders, No Arp Head stud, Upgraded intercooler coming soon, Because I'm having heat soak issues right now and dropping 20hp after a few pulls, No need for Forged rods on this because they already have strong enough rods to handle this type of power, Turbo might need to upgrade soon if I decide to go for 400hp.
Great ! 1. The intercooler go for wagner tunning intercooler brand. Version 2 bigger intercooler. Is a must ! 2. Then u go sunway shop call everco purchase the upgrade wastegate actuator. 3 Plus if your car' daily drive' dont install for oil cooler for engine and gearbox. Use back ori. If u use for fast drive then u can change after market oil cooler. 4. 400Hp , your gearbox clutch will loose so don't do it, an less u use racing clutch.( Malaysia no one is selling because is damn expensive) 5. Pop and bang will harm your car better not to use it. 6. 400hp your turbo must upgrade. 7. Use coolant brand called vp racing brand dont mix with water!! 1 year one time u must change the coolant if u use vp racing brand. 8. If wanna to make 400hp - the high pressure fuel pump must upgrade but at Malaysia no want sell. U can look for oversea brand call navardi tuned upgraded . My advice for you. Because I have huge projects on my own n20 bmw like you. So bro if wanted to go great !! Then do the great. !! Lastly , 400hp is not easy. Trust me.
So, whats the HP and NM? Mine is 281hp at Bootmod3 map. with downpipe and not stock cooler. Now im adding a intake, and willing to get 300hp. Would be great if u can tell me whats yours. The difference is im driving f22.
Dyno episode will be coming soon, but 270hp on the wheel, which is around 320hp. On stock intercooler without an intake. Planning to purchase an intercooler soon so I can try to push above 350hp. Intake wouldn't be necessary though from what I heard from my Michael (my tuner in the video)
Hi bro,i have same car with u 328i done dv valve,full system exhaust and change big intercooler,may i know what software use for tuning?got install xhp or not?TQ
Hi bro, I did a custom Tune at Project'A. They logged the car to check how it's running with my build, and tuned it accordingly. Since you have an intercooler you can definitely make 10-20hp more than me, maybe close to 330hp, but also depends on the condition of your car. I tried XHP for a day and took it off after to try a custom map for the transmission from Project'A too and I like it more personally.
Depending on Fueling, close to 300 Wheel HP or 350hp. Keep in mind that this is for a built motor, but stock turbo. for stock motor it's recommended to stay abit lower for safety.
@AJDrives yea standard for a n20 with forged pistons. Have u thought of getting sleeves? You can safely push more and run e95 bringing that up to 520hp and 650nm.
Depends on your car and the tune you're going for actually, I suggest you contact them (link in bio) to ask for pricing for your car man. Tell them you came from my video for a discount 🤘🏼
Hey, i got a cold air intake on my 328i and the car runs fine when the maf sensor is unplugged but when i plug it in the car misfires on every cylinder. What do you think it could be or what can i do to fix it?
Hey, i got a cold air intake on my 328i and the car runs fine when the maf sensor is unplugged but when i plug it in the car misfires on every cylinder. What do you think it could be or what can i do to fix it?
Hey, i got a cold air intake on my 328i and the car runs fine when the maf sensor is unplugged but when i plug it in the car misfires on every cylinder. What do you think it could be or what can i do to fix it?
one of the best videos of 2024
Finally 328i content ! ❤
your content fire bro been watching for a while never disappointed
Thanks man! Glad you enjoy the content 🤘🏼
Absolutely no one in America calls a custom tune a “pro tune” . 😂
Yeah why you playing for the net bro
What.?$?? We all do where I’m from! What do y’all call it???
holy shit the pronounciation from this lovely guy for the term zündwinkeleingriff @ 14:59 was superb, i actually thought he was german for a second xD
Edit: ok he is german i guess since the whole interface on the pc is german haha
Finally 228i content 🎉
W ProjectA, W Humour
Finally! New episode
This is so good!
Great content 👌
Thanks! Glad you liked it
Love this !
Man's not hot, never hot
Skrrat, skidi-kat-kat
Boom
you don't know
Hey, i got a cold air intake on my 328i and the car runs fine when the maf sensor is unplugged but when i plug it in the car misfires on every cylinder. What do you think it could be or what can i do to fix it?
Am i the only one waiting for you to modify the stock G30? With some bodykits😎
Oh man 😅 Alright alright. Coming soon then!
nice video , im still deciding if it s worth the money difference betwen 328i and 330i in romania it s like 5 to 7k $ difference
It is, go for 330i
hi, which silencer did you use, the 335?
what power did you get at the end you didnt show notihng you still 218 hp??
Lol
obviously more than 3xxhp and 400nm of torque
Full Dyno video will be coming soon! Stay "Tuned" 😂
N20 would barely make over 280whp at typical stage 2. Ea888 is better
@Zer0_Rr with a built internal probably 320hp torque abt 460nm
Great car and tuned. Do u balancing your crankshaft ? , arp head stud ? , upgraded intercooler? Upgraded wastegate actuator? Forged conrod . And your turbo if can. Go for hybrid forged as well. Because i saw you have wossner piston .
Thanks!
Crankshaft has been balanced,
Sleeved Cylinders,
No Arp Head stud,
Upgraded intercooler coming soon, Because I'm having heat soak issues right now and dropping 20hp after a few pulls,
No need for Forged rods on this because they already have strong enough rods to handle this type of power,
Turbo might need to upgrade soon if I decide to go for 400hp.
Great ! 1. The intercooler go for wagner tunning intercooler brand. Version 2 bigger intercooler. Is a must ! 2. Then u go sunway shop call everco purchase the upgrade wastegate actuator. 3 Plus if your car' daily drive' dont install for oil cooler for engine and gearbox. Use back ori. If u use for fast drive then u can change after market oil cooler. 4. 400Hp , your gearbox clutch will loose so don't do it, an less u use racing clutch.( Malaysia no one is selling because is damn expensive) 5. Pop and bang will harm your car better not to use it. 6. 400hp your turbo must upgrade. 7. Use coolant brand called vp racing brand dont mix with water!! 1 year one time u must change the coolant if u use vp racing brand. 8. If wanna to make 400hp - the high pressure fuel pump must upgrade but at Malaysia no want sell. U can look for oversea brand call navardi tuned upgraded . My advice for you. Because I have huge projects on my own n20 bmw like you. So bro if wanted to go great !! Then do the great. !! Lastly , 400hp is not easy. Trust me.
So, whats the HP and NM? Mine is 281hp at Bootmod3 map. with downpipe and not stock cooler. Now im adding a intake, and willing to get 300hp. Would be great if u can tell me whats yours. The difference is im driving f22.
Dyno episode will be coming soon, but 270hp on the wheel, which is around 320hp. On stock intercooler without an intake. Planning to purchase an intercooler soon so I can try to push above 350hp. Intake wouldn't be necessary though from what I heard from my Michael (my tuner in the video)
I made my 328i also like yours exhaust
Niiice! I think it's the best you could get out of a turbo 4 cylinder honestly.
🔥
Bro which car's mufler it is because 2012 bmw f30 comes with different muffler ( Dual one sided outlet)
It's a custom made muffler
Hey AJ.. do you feel your f30 AC smell weird? Mine smell musty when first time I turn on the AC
Hey man! I'd recommend changing the cabin air filter and cleaning out the blower. This might help resolve the issue.
@@AJDrives I have done that yet.. is that a common issue for this model?
It's actually a common thing for all cars as far as i know. depends on the weather and everything.
Hi bro,i have same car with u 328i done dv valve,full system exhaust and change big intercooler,may i know what software use for tuning?got install xhp or not?TQ
Hi bro, I did a custom Tune at Project'A. They logged the car to check how it's running with my build, and tuned it accordingly. Since you have an intercooler you can definitely make 10-20hp more than me, maybe close to 330hp, but also depends on the condition of your car.
I tried XHP for a day and took it off after to try a custom map for the transmission from Project'A too and I like it more personally.
@@AJDrives ok,thanks bro👍
How many hp you can push after the custome tune now ?
Depending on Fueling, close to 300 Wheel HP or 350hp.
Keep in mind that this is for a built motor, but stock turbo. for stock motor it's recommended to stay abit lower for safety.
Hey mate so what are the new torque numbers?
Depending on the fuel I'm using, an additional 110-130nm on wheels. Dynod over 440nm Wheel.
@AJDrives yea standard for a n20 with forged pistons. Have u thought of getting sleeves? You can safely push more and run e95 bringing that up to 520hp and 650nm.
I'm already sleeved. I'm gonna need an intercooler & a bigger turbo to push higher numbers though. Coming soon 🤘🏼
@AJDrives mind sharing what brand worked for u interms of sleeves? Did u have to fab the block to fit the sleeves?
Damnnn 🔥 😧
Ouu how much to do it on my car!!?
Depends on your car and the tune you're going for actually, I suggest you contact them (link in bio) to ask for pricing for your car man. Tell them you came from my video for a discount 🤘🏼
Hey, i got a cold air intake on my 328i and the car runs fine when the maf sensor is unplugged but when i plug it in the car misfires on every cylinder. What do you think it could be or what can i do to fix it?
Hey, i got a cold air intake on my 328i and the car runs fine when the maf sensor is unplugged but when i plug it in the car misfires on every cylinder. What do you think it could be or what can i do to fix it?
Hey, i got a cold air intake on my 328i and the car runs fine when the maf sensor is unplugged but when i plug it in the car misfires on every cylinder. What do you think it could be or what can i do to fix it?
Have you scanned the car to see what code it's throwing?