Just came across this, Jim - great video. I only have one LM car, a Mazda - which has not seen the track yet. For these cars, I really focus on the looks rather than performance, though I imagine they could be made to run a little faster with some effort. The cost is what keeps me from buying more; I occasionally see LM cars available for around $100, and that helps. The thing is - these are (usually) cars that aren't available anywhere else. Thanks for posting!
Thanks for the comments. What makes them appealing is that, as you also mentioned, they are not available anywhere else but in resin. You can get them to run very well if you invest the time. I have a few with a lot of miles on them that I have tuned. The only way I will ever buy another MMK is if I find a used one very cheap. They are definitely NOT worth the money compared to other brands. I picked up two other LeMans cars this week I may do a video on if I can get the time. I am also going to check out your channel, some good content there. Thanks again!
A great video, very informative. I've got some of these from Le Mans Miniatures, MMK, and Top Slot, and I totally agree with your analysis. I run all non-magnetic and like you usually end up putting Paul Gage tires on them, so I do race these cars on my track. The MMK cars I usually have to do a lot of work on them to get them to run the way I want them to. And I find the lack of headlight covers on the MMK to be irritating. Also, the way some come with parts you have to install yourself is irritating. I had some Racers in the past but no longer (long story) and they definitely are larger than other 1/32 brands. Beautiful cars though. And they are very quick for sure. Thanks for the excellent video.
I hope you enjoy my comparison of some Resin 1/32 slot cars. I convey an honest depiction and share my experiences to advance the hobby and help others. I know Le Mans miniatures and MMK are both made in France, but for the purpose of this video I am not bashing French quality in general, just a specific manufacturer. Vive la France! Regards, Jim from Oily Dog Racing.
I’m sorry, but I personally wouldn’t have bought any more MMK cars after the first one. If I pay that much money for a car, it better be at least the same quality as the LM cars.
Yes, common sense would dictate a ceasing of additional purchases, however, I bought about 20 cars at once. Some were so bad that I sent them back. The others I take as a challenge to rectify and make correct. These are models that no one else makes so my desire to own them was my motivation to fix them. I'm retired and my hobbies keep me busy. I can say 100% that I will never buy another MMK car. More videos to follow on that subject. Besides, if it wasn't for guys like me taking chances, we wouldn't have the opportunity to save others from making mistakes.
There are a lot a variances in the LeMans Minature's different Chassis and bodies so I really cannot say if a chip would fit all of them. I know some are pretty tight inside and some do have a little room that you could make a chip work. They are not as spacious internally as say a Scalextric or Carrera car. However, If you are the kind of guy like me, you can pretty much make anything work with a rotary tool and some time & effort 🙂
I love Phil and your video. 🏁💯
Thanks! Phil sends his regards. I'm hoping to make some more videos soon. Jim
interesting, I've never purchased a finished resin slot car, only kits. I'll probably keep it that way 🙂
Just came across this, Jim - great video. I only have one LM car, a Mazda - which has not seen the track yet. For these cars, I really focus on the looks rather than performance, though I imagine they could be made to run a little faster with some effort. The cost is what keeps me from buying more; I occasionally see LM cars available for around $100, and that helps. The thing is - these are (usually) cars that aren't available anywhere else. Thanks for posting!
Thanks for the comments. What makes them appealing is that, as you also mentioned, they are not available anywhere else but in resin. You can get them to run very well if you invest the time. I have a few with a lot of miles on them that I have tuned. The only way I will ever buy another MMK is if I find a used one very cheap. They are definitely NOT worth the money compared to other brands. I picked up two other LeMans cars this week I may do a video on if I can get the time. I am also going to check out your channel, some good content there. Thanks again!
A great video, very informative. I've got some of these from Le Mans Miniatures, MMK, and Top Slot, and I totally agree with your analysis. I run all non-magnetic and like you usually end up putting Paul Gage tires on them, so I do race these cars on my track. The MMK cars I usually have to do a lot of work on them to get them to run the way I want them to. And I find the lack of headlight covers on the MMK to be irritating. Also, the way some come with parts you have to install yourself is irritating. I had some Racers in the past but no longer (long story) and they definitely are larger than other 1/32 brands. Beautiful cars though. And they are very quick for sure. Thanks for the excellent video.
Thanks for your comments. I'm glad we are on the same page.
I hope you enjoy my comparison of some Resin 1/32 slot cars. I convey an honest depiction and share my experiences to advance the hobby and help others. I know Le Mans miniatures and MMK are both made in France, but for the purpose of this video I am not bashing French quality in general, just a specific manufacturer. Vive la France! Regards, Jim from Oily Dog Racing.
I’m sorry, but I personally wouldn’t have bought any more MMK cars after the first one. If I pay that much money for a car, it better be at least the same quality as the LM cars.
Yes, common sense would dictate a ceasing of additional purchases, however, I bought about 20 cars at once. Some were so bad that I sent them back. The others I take as a challenge to rectify and make correct. These are models that no one else makes so my desire to own them was my motivation to fix them. I'm retired and my hobbies keep me busy. I can say 100% that I will never buy another MMK car. More videos to follow on that subject. Besides, if it wasn't for guys like me taking chances, we wouldn't have the opportunity to save others from making mistakes.
Enjoyed your show. I would like to buy a la mans mini. Just asking if a frankenslot digital chip would go in any of them. Cheers
There are a lot a variances in the LeMans Minature's different Chassis and bodies so I really cannot say if a chip would fit all of them. I know some are pretty tight inside and some do have a little room that you could make a chip work. They are not as spacious internally as say a Scalextric or Carrera car. However, If you are the kind of guy like me, you can pretty much make anything work with a rotary tool and some time & effort 🙂