10 Common Question of Waste Water Treatment (हिंदी में) || Sewage Treatment Plant Questions

(हिंदी में) 10 Common Question of Waste Water Treatment (हिंदी में) || Sewage Treatment Plant Questions; हैलो दोस्तों, मैं मीनू जैन इस वीडियो में मैं वेस्ट वाटर ट्रीटमेंट प्रोसेस से संबंधित 10 सामान्य प्रश्नों के बारे में बात करुँगी? ये विडियो हिंदी और इंग्लिग दोनों लैंग्वेज में अपलोड किया गया है, अगर आपको यह वीडियो पसंद आए तो मेरे चैनल कोसब्सक्राइब करें और वाटर और वेस्टवाटर प्रोसेसेज से संबंधित आगे आने वाले वीडियोसके नोटिफिकेंशंस और अपडेट के लिए बेल बटन को प्रेस करें।
If you like this video, please subscribe to my channel.
RUclips:
/ @meenujainlalitpur
Twitter:
/ meenuja60752752
LinkedIn:
/ meenu-jain-36aa533a
Please support us at Patreon:
/ meenujain
Please share and follow my "Facebook Group and Page";
/ wastewater15
/ wastewater16
For Business inquiries:
[e-mail]
#Meenu_Jain_Lalitpur #wastewater_treatment
#water_treatment_animations

[@ruchitasahu3678]

This 10 questions with answers is very helpful for me. Thanks

[@jeetuchauhan9222]

Hi

[@bhaveshdudhat1052]

Thanks madem..nice video many things for learning purpose

[@p.kgahlaut6024]

Kal mera JMC projects ka interview hai ..video dekhne k baad lag raha hai jaise b.tech avi passout hua hu .har ek chiz barik se bataye aap aacha laga .

[@MeenuJainLalitpur]

Thank you

[@S_kg509]

Beautiful post dear friend. Thanks

[@lomashyadav817]

Thanks...

[@gksain3926]

Very good mam ji

[@abdulmalikgaur1207]

Thank u so much

[@kandarpjoshi1347]

Hello,
What is roll of mechanical engineer in this field. How to make career as a mechanical engineer in water system.?
Please, guide.

[@Carsdoctors]

Gd

[@paripalak818]

Muje aeration system ke bare me janna he. Bio mass devlop kese karte he. Har process samjaiye.

[@akashpathak188]

I am chhatarpur

[@bhaveshb5883]

Please make a video on ' calculation of sludge generation '

[@industrialwastewatertreatm7519]

SLUDGE PRODUCTION
Let assume,
Influent COD as 1400 mg/l
Flow as 110 m3/hr
Then, based on those values we can easily find out how much kg of COD will get into the
bio reactors per day,
= 0.0014 kg/l * 110000 l/hr * 24hr/day
= 3696 kg COD/day
It is assumed that 1kg of soluble COD produces 0.3 to 0.5kg biomass in aerobic degradation
based on influent characteristics.
DAILY NET SLUDGE PRODUCTION
It means total sludge load entering the system and generated in the system.
= (Solids production coefficient * COD load applied) + Kg of influent TSS applied
= ((.35 kg SS/kg COD applied)*3696 kg COD/day) + (35mg/l * 3696m3/day)
= (1294kg + 130kg)/day = 1424kg/day (approx)
To make it simple we calculated sludge production only based on the solids which entering the
system and the solids will be produced per kg COD consumed, In case of a steady state system,
the daily net sludge production is equal to the daily load of sludge discharged from the system,
this is the easiest non technical way to calculate sludge production in AS treatment system.

[@abdulkhalid7502]

Good presentation 👍 but vice is low

[@khannaseem6919]

🙄🤔

[@akshayakshay1156]

We are into manufacturing of textiles products. How can we contact you?

[@rohangail3049]

STP या ETP मे BLOWER कब चलाया जाता हैं
लिफ्टिंग् के पहले या बाद मे
या लिफ्टिंग् के साथ साथ

[@santoshsahu9198]

Areation tank me bio mass bacteria cod kam kaise kerta hai pl describe me bataye

[@KrishnaSingh-cm6ve]

How to know ETP plant treatment capacity please tell full calculation

[@rohangail3049]

Ple इसका अंसार दे दिजीय

[@klsharma8843]

Hi I need more information.

[@gbhardwaj4747]

Stp plant me bacteria kaise grow kr skte h,,and kyu grow kre

[@AnkitYadav-si9dr]

Everything is fine but let the voice speak a little bit

[@pagepencil4695]

आप इस वीडियो को किस ऐप की सहायता से बनाए हो, प्लीज बताएं, मुझे अध्यापन संबंधी वीडियो बनाने हैं। कृपया।

[@84manjit]

Volume low ,barely audible. Otherwise excellent video

[@arpitashukla1801]

Mem what is the main purpose to install RAS pump in SBR

[@MeenuJainLalitpur]

Main function of RAS pumping is to maintain the microbial population for organic matter decomposition.

[@arpitashukla1801]

Mem plz teel me how to calculate F/M ratio In SBR?

[@bhavyaprajapati6892]

Please increase a volume

[@winjhonshakeel4079]

miss app voice bhat kam hai

[@colourbluecreation1320]

Mama kuch jaankari chahiye aapse

[@Alon5634]

Maim waste water ke liye koi book btaiye Hindi me

[@MeenuJainLalitpur]

Mai hi likhne wali hu

[@gbhardwaj4747]

MLSS ko kaise maintain kr skte h

[@industrialwastewatertreatm7519]

The sludge return rate or return activated sludge (RAS) rate is important in controlling and maintaining an adequate MLSS concentration in the aeration tank to achieve the desired degree of treatment.

[@pankajkumar-dt7ci]

How to remove water color of pharma company by ETP
Plz....

[@ramdasikke.4498]

Use alum and hypo (cholorin)

[@pankajkumar-dt7ci]

@@ramdasikke.4498 already use alum lime and polyelectrolyte

[@safetyvideos7443]

what is ideal BOD for water ? If BOD increse what happen

[@jeetuchauhan9222]

Hi