I fitted a clarisea to my tank on january the 3rd 2020 and i am going to change my 1st roll today, june 10th 2020. I fitted it as high as possible in the sump. Water level just above the flap
John Wakefield I found out afterwards pal there had been a faulty batch of rolls arrive in the uk and i was burning through them like crazy, I took it off in the end and went back to floss while they fixed the issue but found no difference using floss other than that I saved a fortune on rolls so I sold it on 👍
Robbie Williams hi mate, yep it’s just below the float switch. when the roll clogs it rises, pushes the float switch up and rolls it on 👍 I’m doing some sump work over Christmas though so I’m planning on raising it to the highest level on the bracket 👍
UK Reefer I’ve just rang DD and Stuart said to have it as high up as possible to maximize the life of the roll . Their customer service has been class , I broke the motor on Friday by using the wrong screw . They emailed me straight back out of hours and contacted me first thing yesterday morning to say they would send me a replacement motor . Well impressed with them
Robbie Williams Stuart’s a great guy mate, he’s helped me a fair bit with the issue I’m having with the rolls. He’s advised me to raise it up also I just can’t at the moment as it will restrict my access to the return section but if the sump tweak goes ahead I’ll definitely be able to get it on the highest setting 👍👍
@@robbiewilliams8580 thanks mate, i definitely recommend the union but on top of that don't glue the plumbing so that if you need to adjust it it's easy to take it off and adjust
I’ve got no idea pal as I’ve never had a 250, I’ve seen people fit them so imagine you can although it might give you more room removing them. In my case it gave me a lot more room pal 👍
Gavin Mann thanks pal it’s all getting there mate. D&D have been in contact with me asking me to raise the Clarisea up further but have also sent me some test rolls which arrived this week. I’m waiting for the roll I have on to burn through and I’ll then be fitting these test rolls. Fingers crossed they do the job as it’s a fantastic piece of kit it’s just the rolls letting it down at the minute but D&D are on it bud 👍 I’ll keep the news posted on here 👍
@@ukreefer4907 Nice one thanks. i have mine set so sump water level is at top of bypass cover. May raise another inch. May also slow flow down through it until the rolls have been sorted. Love the unit as hated filter socks, just hope fleece gets updated as gonna cost a fortune otherwise.🤞 Will keep an eye out for updates. cheers😊
Gavin Mann no problem at all. d&d have recommended to me to stick the Clarisea as high as it will go on the bracket pal 👍 apparently it’s got something to do with the head pressure but they are definitely working on the fleece roll issue as these tester rolls feel totally different to the original rolls. Fingers crossed this new material works buddy. Got the moving video hopefully going on tomorrow 👍
@@ukreefer4907 had a reply from d&d, they are sending me some of the new rolls to try as well. To get as much feed back as poss from as many people. Will let you know how mine go.
Mike Hutchinson i just left the overflow pipe going into the sump pal, I have the water level a few cm’s under the emergency in the weir anyways do nothing really goes down it 👍
Korey Cooper It should be perfect for a predator tank pal 👍 a predator tank should be easier to run than this one as this is a mixed reef system with a view to go heavy with sps in the future 👍
alan cunningham lol!! I forgot to mention on the video! They’re on pal 😂 had a serious amount of luck. I put the left door on first and it went on dead level! I couldn’t believe it, I had to slightly adjust the right door but it was a doddle 😊 was so relieved I didn’t have to take the sump out 😊
Looking at the water depth I would raise the height up still further so that the water level in the sump is about the same level as the bottom of the bypass pipe. The more of the Clarissa that is above the water, the more head pressure there is to drive the filter. Also I note that you had not used the 2 black bungs to hold the brackets in place, other than that, good work.
Thanks Stuart, I didn't see any black bungs in with the box pal, i'll dig it out and have another look. I'll raise it up further as you suggest and fingers crossed that will help the rolls last longer. Thanks pal
John McDonald it might be your internet or a glitch with RUclips buddy, I’ve checked it on 2 different computers this morning and it seems to be working fine pal
Just a update on my clarisea 3000 On my Redsea250 reefer Roll is lasting about 4 month now Its only in a inch of water with the slots on the tube inside it pointing down Alot better now Next fix is the gate vale there shocking on the redsea shite
Miketube666 great to hear it mate, completely agree pal the Red Sea valves are awful, still amazes me that they haven’t switched them out for gate valves yet 👍
Miketube666 unions a good idea mate just incase, I’ve never had an issue with mine but I’ve also got a union further up the pipe along with a union below just incase 👍
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I fitted a clarisea to my tank on january the 3rd 2020 and i am going to change my 1st roll today, june 10th 2020.
I fitted it as high as possible in the sump. Water level just above the flap
John Wakefield I found out afterwards pal there had been a faulty batch of rolls arrive in the uk and i was burning through them like crazy, I took it off in the end and went back to floss while they fixed the issue but found no difference using floss other than that I saved a fortune on rolls so I sold it on 👍
Now that you’ve raised it mate , what is the new water height inside the Clarisea . Did u say it’s just below the float switch ? Thanks in advance
Robbie Williams hi mate, yep it’s just below the float switch. when the roll clogs it rises, pushes the float switch up and rolls it on 👍 I’m doing some sump work over Christmas though so I’m planning on raising it to the highest level on the bracket 👍
UK Reefer I’ve just rang DD and Stuart said to have it as high up as possible to maximize the life of the roll . Their customer service has been class , I broke the motor on Friday by using the wrong screw . They emailed me straight back out of hours and contacted me first thing yesterday morning to say they would send me a replacement motor . Well impressed with them
Robbie Williams Stuart’s a great guy mate, he’s helped me a fair bit with the issue I’m having with the rolls. He’s advised me to raise it up also I just can’t at the moment as it will restrict my access to the return section but if the sump tweak goes ahead I’ll definitely be able to get it on the highest setting 👍👍
UK Reefer nice work mate I need to buy a union and get chopping and glueing this weekend and get mine on the go
@@robbiewilliams8580 thanks mate, i definitely recommend the union but on top of that don't glue the plumbing so that if you need to adjust it it's easy to take it off and adjust
Tanks looking good mate. Glad to see it going well!
Reef Noob thanks mate getting there slowly 😊👍
Can you install thi on the Red Sea Reefer 250 without ripping out the stock filter sock holder?
I’ve got no idea pal as I’ve never had a 250, I’ve seen people fit them so imagine you can although it might give you more room removing them. In my case it gave me a lot more room pal 👍
Great vid, any news on the new fleece rolls? i have the same problem with burning through rolls. They have not replied to me.
Gavin Mann thanks pal it’s all getting there mate. D&D have been in contact with me asking me to raise the Clarisea up further but have also sent me some test rolls which arrived this week. I’m waiting for the roll I have on to burn through and I’ll then be fitting these test rolls. Fingers crossed they do the job as it’s a fantastic piece of kit it’s just the rolls letting it down at the minute but D&D are on it bud 👍 I’ll keep the news posted on here 👍
@@ukreefer4907 Nice one thanks. i have mine set so sump water level is at top of bypass cover. May raise another inch. May also slow flow down through it until the rolls have been sorted. Love the unit as hated filter socks, just hope fleece gets updated as gonna cost a fortune otherwise.🤞 Will keep an eye out for updates. cheers😊
Gavin Mann no problem at all. d&d have recommended to me to stick the Clarisea as high as it will go on the bracket pal 👍 apparently it’s got something to do with the head pressure but they are definitely working on the fleece roll issue as these tester rolls feel totally different to the original rolls. Fingers crossed this new material works buddy. Got the moving video hopefully going on tomorrow 👍
@@ukreefer4907 had a reply from d&d, they are sending me some of the new rolls to try as well. To get as much feed back as poss from as many people. Will let you know how mine go.
Gavin Mann that’s brilliant mate, I’m just about to add my first one on so will keep everything crossed 👍
What did u do with over flow pipe going in the sump
Did u just leave it
Mike Hutchinson i just left the overflow pipe going into the sump pal, I have the water level a few cm’s under the emergency in the weir anyways do nothing really goes down it 👍
Is this system good for a Saltwater Predator Tank
Korey Cooper It should be perfect for a predator tank pal 👍 a predator tank should be easier to run than this one as this is a mixed reef system with a view to go heavy with sps in the future 👍
you got the doors on yet :P
alan cunningham lol!! I forgot to mention on the video! They’re on pal 😂 had a serious amount of luck. I put the left door on first and it went on dead level! I couldn’t believe it, I had to slightly adjust the right door but it was a doddle 😊 was so relieved I didn’t have to take the sump out 😊
I need u to tell me what kind of system to get for 120 tank piece by piece could you give me that in detail
Korey Cooper that would be completely ur call on equipment pal as there’s so much available at different price points. Have you kept marine before?
Looking at the water depth I would raise the height up still further so that the water level in the sump is about the same level as the bottom of the bypass pipe. The more of the Clarissa that is above the water, the more head pressure there is to drive the filter. Also I note that you had not used the 2 black bungs to hold the brackets in place, other than that, good work.
Thanks Stuart, I didn't see any black bungs in with the box pal, i'll dig it out and have another look. I'll raise it up further as you suggest and fingers crossed that will help the rolls last longer. Thanks pal
Video won't load!
John McDonald it might be your internet or a glitch with RUclips buddy, I’ve checked it on 2 different computers this morning and it seems to be working fine pal
Just a update on my clarisea 3000
On my Redsea250 reefer
Roll is lasting about 4 month now
Its only in a inch of water with the slots on the tube inside it pointing down
Alot better now
Next fix is the gate vale there shocking on the redsea shite
Miketube666 great to hear it mate, completely agree pal the Red Sea valves are awful, still amazes me that they haven’t switched them out for gate valves yet 👍
UK Reefer i was thinking of putting a union either side of the gate valve for cleaning what u reckon have u had any problems with it
Miketube666 unions a good idea mate just incase, I’ve never had an issue with mine but I’ve also got a union further up the pipe along with a union below just incase 👍