CATIA V5 REVERSE ENGINEERING !! From Scanned Data to solid catpart!
HTML-код
- Опубликовано: 20 авг 2024
- Hi! Welcome to my youtube channel!
In this video, I will show you how to make a scanned data into a solid catpart. I hope this video will help you in learning more about catia!
This video covers:
1) How to import STL file into CATIA V5
2) How to create curve from scan
3) How to create sketch from scan
4) How to extrude curve
5) Difference between trim and split
6) How to solidify a surface
Excellent job with the design and explanation of features!
Congrats, very good job, thanks soo much to share your knowledge
a little late to the party but....nice work!
Good work clean explanation
it seems that you know what you are doing and that you understand it, it's just a pity that it's in such a low resolution and that the sound is so lousy
Very unfortunate indeed. My laptop didn't have the actual power to screen record and do catia at the same time sadly and for the sound, I recorded it using my phone and slap it on the recording, it's even worse without the background sound . At tht time I only wanted to share the knowledge I learnedd from my Engineering school... very sorry for it!! I'll try my best to increase the quality of my content in the future. Been taking a break from youtube to work part time while studying and saving up for upgrades :) Thanks for your supportt and please continue supportingg
@@NizuaInas don't take it personal mate.. Quality may be low, but the content is top notch... Keep upgrade yourself and help others to show the way
Exactly this video teach me about re thank you so much
Amazing very informative video
It is a great video, but I recommend using a higher quality minimum 720p at 30 fps
Thank you for the suggestion ! However I'm still new with the screen recording software . I am currently using the OBS screen recorder and have set the output to 720p and 30fps but it didnt change the quality T-T . Do you have any recommendations or solutions for that ?
Lower the music sound please ..
Another one 🔥 !!!
The music is not loud enough and the quality is not bad enough
Good explanation!!👍
Can you share this stl file?
Thanks
Excellent video...you are so successfulll....can you share this stl part for practice ....thanks
Will be nice if you provide the scan part. Nice work
Thanks mam
Video is great but not good resolution. Also you went too fast between switching work bench and picking icon, you need to explain which slow down and explain which work bench and which icon you are picking for each operation.
Thank you for the comment ! I'll try my best to incorporate these thoughts in future videos !
please can you send the part?
There's a whispering voice in the background. I can't hear the song clearly though...
What was the starting workbench that u opened the file? Can u please share the steps to do stl to solid?
Hi ! To import a scanned data or an stl file , simply go to the digitized shape editor workbench . You can go to this workbench from Start > Shape > Digitized shape editor . Hope this helps !
@@NizuaInas PLEASE!!! can you you send the stl file?
@@ghaf4414 I am so sorry.. Unfortunately, I have formatted my laptop and do not have access to my previous works
background music is to loud.... also it´s a little bit noicy - it´s difficult to understand. Solution rate of the video is very bad, should be in a higher level. Video for itself is perfect....would like to have this in better quality and sound so that I´m able to learn from it.
Hi nizua, Can u explain helical gear wheel part's reverse engineering process in CATIA? If it is editable (like creating sketch) means that's too helpful for me.
Hi Karthik! Thanj you for your support. Unfortunately, I do not have access to CATIA anymore because I have graduated from the engineering diploma. I am now venturing into games design!
Okay nizua. Thanks.
Pls remove the music and your video resolution is low. Upload new one
What workbench is using it?
Hi nizua....I have some doubt in remastering....how can I contact you
I need a help to u when i select "basic surface recognition" options it's open "canonic surface from cloud"
When selecting "basic surface recognition" a cloud (aka an stl file) needs to be selected. Just click on the 3 dots icon of the box that pops up and find your stl file. That should solve the problem, if I'm not mistaken :)
@@NizuaInas i try
@@NizuaInas r u online plz reply me
@@NizuaInas there is no 3 dots icon can you tell me in brief, i selected stl file
Can u plz send me images of 3 dots on my mail ID ajaymalviya2525@gmail.com
Can u plz tell which version of catia u use in this video plz
CATIA V5
@@NizuaInasthere r many versions of catia V5 like V5R17, V5R18, V5R19, V5R20 and V5R21
Can u plz tell me complete version
@@NizuaInas can u plz connect me through mail. My mail ID is ajaymalviya2525@gmail.com plz reply me
@@ajaymalviya4377 sorry for the late reply . I will tell you once I reach home . Currently I am not at home , therefore I do not have access to my computer yet .
can i have the file in stl :
Hi This video very helpfull if u dont mind can u give me this scan data for practice please
I need your help in learning this section
Sure . I'll help with what I can . Ask away ! :)
I want to practice on more models. Do you have any files or any suggestions for me to work on that
Basic principles and application of the tools
@@surajpatil-mo9oo currently I don't own any files of my own except the 2 files from my school . I can send them to you if you want it
@@surajpatil-mo9oo I only know a little bit , but I will help with what I can !
first of all tune down music or get rid of it
Hi
Don't add music pls
A shame, that quite interesting tutorial is made unusable by sound levels (music is covering the voice, even the door sounds in background are louder...) and the resolution set to max 480... What an idiotic idea...
the music... is awful
stupid background music , this is a tutorial not a DJ