FRANK T. BUG has finally made it to PE Design 10! This is a full PE Design 10 class on making connections! Meet Frank Bug and improve your embroidery digitizing! #goteamPEDesign10
@@morenoscreationsllc I clicked on the link above but there was nothing. Maybe there was a time limit on it? I'm going to try drawing my own but we don't need to use Frank. We can use whatever we want.
How do I save a picture to upload in PE Design? I tried drawing my own Frank to use but the software didn’t recognize it. So I tried to digitize Frank without a pattern to follow and it didn’t turn out well! Looking at the legs I can see the body will not be rounded.....more like a squished Frank! I would really like to learn this! Thanks for the videos!!
I plan on teaching digitizing down the road and Frank is a great example of how to do complex embroidery. Frank lives on!! I hate it that RUclips took away private contact. Of if they still do it I don't know how to do that. I just like to digitize
I am as green as green could be when it comes to Machine Embroidery and PE Design 10 but you make it seem easy! I do wish there was more detail in video #1 about the toolbar shortcuts. It took me a while and referencing the user manual to find the Open Straight Line drawing tool. Thank you for this and all the videos.
Thanks for the time to make these videos. Very informative 👍🏻I do have some questions. I recently purchased PE Design 10 upgrade version. Upon installation I recieve a message about Must connect a card writer/reader module. I'm hoping you can clear the confusion. What is the best ( card reader module) for me to get for PE Design 10 upgrade version? Also does PE Design 10 upgrade version software work by itself or do I have to purchase another software so that I can use Pe Design 10? If any one else can chime in I would greatly appreciate you all. Thanks a million
You've made so much sense of those running stitches which willl be covered. I've watched my machine stitching the running stitches and wondered how the designer knew where to put them. Now I know! Thank you! BTW I say "Zed" as I am in UK. One question. Can we alter the width of the zig zag lines? If you've already told us I must have missed it!
This video helped me a lot...Although I did get stuck for a bit when I did not have the scissors!!! I was so frustrated that I could not remember HOW to get the scissors to be visible. So here is for the next person that forgets how and searches comments to find the answer: Your machine must be on the Multi-Needle machine (even if you don't have one). That is the ONLY way to view the scissors. If you are still not seeing the scissors go to OPTIONS and make sure the box for "Jump stitch trimming" is checked. ZEEEEE :)
Thank you so much! I loved this! I will be out of town, but I promise to share my stitch out of Frank when I get home at the end of September. I am taking PE Design 10 with me so I can practice, but wont have a machine to test anything. Oh, and I say ZEE, but understand ZED just fine!
yay! I can't way to see Frank!! Awesome that you are taking PE Design 10 with you - there will be lots more videos to work with, and when you get back you will be ready to get stitching!
ha ha ha! yes, I say zed!! have fun digitizing, you can post your homework in the OML Embroidery University facebook group! Frank shows up a lot there!!
Thanks for this great video I have wathed it twice now just so it sticks in my head. I do have a question would you use for the strips on franks back the manual punch curved block what would the difference be if you did?
would you consider plotting the same way that an artist starts their drawings? They look at the picture, then make simple lines, then start drawing their design? I've only been able to do stick figures and I've been learning that digitizing is like starting a picture like an artist would do it, lines, darker lines, then fills with colors, etc.....
Hi, I am following the instructions but I cannot seem to find the scissor symbol when I get to the end of a line for instance when I get to the end of one of the antenna and click there is no scissor symbol. Can you tell me how to get it, thank you.
FRANK T. BUG has finally made it to PE Design 10! This is a full PE Design 10 class on making connections! Meet Frank Bug and improve your embroidery digitizing! #goteamPEDesign10
OK, I'm new and this is probly a really dumb ? But I can't find frank to do the class with you. I feel dumb. Someone please help!!
@@morenoscreationsllc I clicked on the link above but there was nothing. Maybe there was a time limit on it? I'm going to try drawing my own but we don't need to use Frank. We can use whatever we want.
How do I save a picture to upload in PE Design? I tried drawing my own Frank to use but the software didn’t recognize it. So I tried to digitize Frank without a pattern to follow and it didn’t turn out well! Looking at the legs I can see the body will not be rounded.....more like a squished Frank! I would really like to learn this! Thanks for the videos!!
I plan on teaching digitizing down the road and Frank is a great example of how to do complex embroidery. Frank lives on!! I hate it that RUclips took away private contact. Of if they still do it I don't know how to do that. I just like to digitize
excellent tutorial! Fun and engaging. Thank you so much for your PE Design series!
I am as green as green could be when it comes to Machine Embroidery and PE Design 10 but you make it seem easy! I do wish there was more detail in video #1 about the toolbar shortcuts. It took me a while and referencing the user manual to find the Open Straight Line drawing tool. Thank you for this and all the videos.
Thanks for the time to make these videos. Very informative 👍🏻I do have some questions. I recently purchased PE Design 10 upgrade version. Upon installation I recieve a message about Must connect a card writer/reader module. I'm hoping you can clear the confusion. What is the best ( card reader module) for me to get for PE Design 10 upgrade version? Also does PE Design 10 upgrade version software work by itself or do I have to purchase another software so that I can use Pe Design 10? If any one else can chime in I would greatly appreciate you all. Thanks a million
You've made so much sense of those running stitches which willl be covered. I've watched my machine stitching the running stitches and wondered how the designer knew where to put them. Now I know! Thank you!
BTW I say "Zed" as I am in UK. One question. Can we alter the width of the zig zag lines? If you've already told us I must have missed it!
This video helped me a lot...Although I did get stuck for a bit when I did not have the scissors!!! I was so frustrated that I could not remember HOW to get the scissors to be visible. So here is for the next person that forgets how and searches comments to find the answer: Your machine must be on the Multi-Needle machine (even if you don't have one). That is the ONLY way to view the scissors. If you are still not seeing the scissors go to OPTIONS and make sure the box for "Jump stitch trimming" is checked. ZEEEEE :)
glad you figured it out and thanks for posting the instructions!
Thank you so much . I found the scissors
Thank you so much! I loved this! I will be out of town, but I promise to share my stitch out of Frank when I get home at the end of September. I am taking PE Design 10 with me so I can practice, but wont have a machine to test anything. Oh, and I say ZEE, but understand ZED just fine!
yay! I can't way to see Frank!! Awesome that you are taking PE Design 10 with you - there will be lots more videos to work with, and when you get back you will be ready to get stitching!
I really like this video. As a PE10 beginner I Iearned a lot from it! Thnx.
Great tutorial! I had fun. I did it quicker than I would have thought I would finalize it.
😀
Excellent video, giving the how and just as important the why.
Glad it was helpful!
Thank you. Great explanation. Now to get on with the digitising. Oh almost forgot...I say zed!
ha ha ha! yes, I say zed!! have fun digitizing, you can post your homework in the OML Embroidery University facebook group! Frank shows up a lot there!!
Thanks for this great video I have wathed it twice now just so it sticks in my head. I do have a question would you use for the strips on franks back the manual punch curved block what would the difference be if you did?
Can you tell me the functions in writing. Which keys are you using when turning back?
is the PE Designs something like I have a Brother PE770 embroidery machine.Could you explain please?
What is the difference between the white scissors and the black ones?
would you consider plotting the same way that an artist starts their drawings? They look at the picture, then make simple lines, then start drawing their design? I've only been able to do stick figures and I've been learning that digitizing is like starting a picture like an artist would do it, lines, darker lines, then fills with colors, etc.....
Great Lesson. Now to test out my work. I say Zed. :-)
yay Zed!
Thanks for this video
you are welcome! Frank has been super fun to work with!
Thank You
Hi, I am following the instructions but I cannot seem to find the scissor symbol when I get to the end of a line for instance when I get to the end of one of the antenna and click there is no scissor symbol. Can you tell me how to get it, thank you.
figured it out!
grr why are my scissors not moving? Do I have to have my start exactly on the other scissor?
Love
Frank T. Bug loves you back, LOL!
I say 'Zed' as I'm English