10 Quick Install Tips For Bosch HVAC Inverter Systems - IDS & IDP
HTML-код
- Опубликовано: 10 сен 2024
- New to installing Bosch inverter systems? This video will quickly cover 10 tips to get you going on your install. Please refer to instruction manual for all specs and requirements.
Been installing Bosch IDS systems for 5+ years, absolutely love them. We have had zero failures, or breakages. Only issues encountered have been 1 using Arzel zoning, not sure about other zone systems, but with Arzel there is a dip switch setting that if not done leads to erratic behavior. We had that on a system, but once confirmed by Arzel tech support, we corrected and system has been perfect since.
2 we had several Bosch systems not working correctly using Bosch BCC100 thermostats, once we realized that they sometimes need a firmware update we have had zero issues since.
Of all the Bosch systems we have installed, it has been roughlt 70% duel fuel vs. strait HP, we are in a heavy gas usage area.
I love them!
@@ZERO-F2G- love to hear that!
Do NOT charge Bosch by subcool. We were originally doing that but found that systems with a short lineset run would sometimes need over 4 pounds of refrigerant in order to get the subcool listed in the install manual, even systems with less than a 50 foot line set. We then learned from our supplier, Johnstone that we should be adding based on line set length and not using the subcool method of charging the systems because it is not accurate on a Bosch. And yes, we were pushing the force button and allowing the time for the system to get up to 100% operational capacity. Tech Support said that subcool should only be used for diagnostics purposes on these systems, never to verify proper charge.
Great video Nate.
Thanks Tim! It was a team effort to put all of this together.
Amazing video, Would you be able to guide me with tweaking my system that was installed. Thank you in advance
@@5sunny01 thanks. Perhaps…. What tweaks do you need
Very informative video! Does this cross over to the ground source line of products?
Thanks! No the is for the IDS and IDP product only.
How much would a IDS light 15 seer cost to install in Ohio?
@@Steve-bm2zm sorry that’s a question for a licensed contractor.