Secret Use of a Drill Chuck !
HTML-код
- Опубликовано: 19 авг 2019
- Secret Use of a Drill Chuck !
NEW BRIGHT IDEA
----------------------------------------------------
• Top3 Don't Throw Away ...
• Video
• AMAZING! Top 3 Bright ...
• AMAZING! Top 2 Ideas f...
• AMAZING! Bright Idea f...
• Video
The Secrets of Welding! • Secret Profile Pipe! W...
-----------------------------
AMAZING! Top 3 Bright Ideas!
-----------------------------
• AMAZING! Top 3 Bright ...
• AMAZING! Top 3 Bright ...
• Top 3 Bright Ideas wit...
Idea With a Drill !
-----------------------------
• Bright Idea With a Dri...
• A Ttricky Secret for a...
• Bright Idea With a Dri...
Idea of the Bicycle Hub!
-----------------------------
• Bright Idea With a Dri...
• Awesome Device of the ...
• Bright Idea from the O...
Idea With Angle Grinder!
-----------------------------
• Bright Idea With Angle...
• Bright Device of the A...
• Bright Idea with an Ol...
Top Ideas !
-----------------------------
• Bright Idea With PVC P... - Idea With Plastic Canister!
• AWESOME IDEA! HOW TO T... - TWIST ELECTRIC
• Bright Idea With a Dri... - Idea With a Saw!
• AMAZING Idea With an Ax ! - Idea With an Ax
Other Creative Ideas
-----------------------------
• AMAZING! Bright Idea f...
• Secret Use of a Drill ...
• Bright Idea With Drill...
• Bright Idea With an Ol...
• Brilliant Idea With An...
• A Brilliant Idea With ...
----------------------
Welcome to Fixotronic channel:
Our channel includes such videos
- Life hack
- DIY
- How to make
- Awesome ideas
--------------------
Music:
Stacy and George
Marvin's Dance
Nice project 👍
Wonderful creativity.
Best wishes.
Çok güzel olmuş.Ellerine ve bilgine sağlık.
Excelente... Muy impresionante
Vc tá com tempo em amigo.
Bem mais fácil e seguro ir na loja comprar uma garra ...
Cada coisa...
Edgar Ferreira armes
A clever idea in using old parts that are lying around. 👏
Dude, did you know that you can remove the chuck from a drill without destroying the spindle?!
Asshole was so excited that he lost his mind.. 🤣🤣🤣🤫
Gostei,vou fazer um para mim.
Saludos desde MTY NL
excellent tool , very good
Hola sorprendente con esos ingenio
EXCELLENT SIR
Como ocurrencia no está mal.
Muy útil para una emergencia, en lo que compras un porta electrodo
vERY GOOD IDEIA .......... A HUG FROM PORTUGAL
Good idea
Neat idea!!
pretty cool idea
You had me at a cat in a bucket....7 seconds in and i'm laughing.
funcionou bem
Muy buena idea 👍
Это случайно не адвокат Егоров? 😉
Fkg well impressed with that one dude 👌👌👌👌
Holla! Es real que esto resulta en algo menos prático para quitar el eletrodo rápido quando queremos, pero yo en mis pequeños trabahos tengo tido más problemas con el elctrodo me caindo quando no lo quiero, do que no lo libertando ... Gracías por este vídeo!! por favor sigue postando!
Now you have to unscrew the head to change rods instead of simply opening the grips by simply pressing the handle together. Neat idea but it creates more trouble than is necessary.
To the contrary, if you have used a welding grip for some time you'd know how frustrating it is to have the electrode slip away or change direction unintentionally.. A mere hand tight on the chuck will do well, doesn't have to be tightened with a key.
No esta mal. Pero no será muy pesado?
Bu kaynak kablosunun uçlarını elektrik fişine nasıl bağlıyorsunuz acaba? Yine kablo içindeki bakır telleri iki kısma ayırıp mı bağlıyorsunuz acaba? teşekkür ederim.
Отлично!
Tolle Sache aber wo kommt der Strom her,Pkw Batterie?
@@edvonschleck7187 Сам ты хер.
Forma e informal
secret?...useful!
Muy bueno
Good
You're wearing the glove on the wrong hand.
kkkkkkkkkkkk lol
commonplace for boilermakers to wear left hand glove
@@kenscott6162 what's the purpose?? Why left hand glove on the right hand?? What's the reason for that??
@@chandradharkoneti Left glove always on LEFT hand. That was the hand that held things in place while they were tack welded. A
Also it was the hand that held the oxy cutter and was closest to the flame. If you haven't worked in a Fab shop you may not understand
muito bom e funcionalvou faser um
Eres un genio 👍👍👍
sow de bola em..
I want a cat bucket. Lol
Valeu guerreiro !❤❤
Warning should be put: Do not try this at home, unless you want to lose fingers.. Mad Max?
kool
Lo mejor que he visto en mucho tiempo,si la idea es tuya ? Felicidades buen trabajo bien echo, un abrazo
Cánçiones de bale ntin Elizalde
or you could drive to harbor freight and buy a 400 amp stinger for $13.
...and also get something that won't electrocute you through the paint or that thin rubber!
Good idea, but it is too heavey to carry for along time
genio¡¡¡¡¡ el gatito encima jugeton
É bom mas você não colocou a onde é ligado o fio como é ligado o Terra
What is your power source ?
Uhh hello we're all grown men here. You know we take our power from anger,hatred, the left feet of grey kittens, and the women as they sleep. Havent you been artending the meetings?
How do u not know that?
@@paullainhart8288 he asked you a question ?
@@patrickkane7207 and i gave a bullshit sarcastic half answer
Who thought the cat was gonna get it?
The title got you the views you want but the idea is silly and a waste of a chuck you could put to better use for your welding projects and save buying a die grinder!
Drill and tap that chuck to fit your angle grinder spindle and you'll put it to much better use as a weldor spinning flap wheels, wire brushes etc.
There is zero logical reason to use a steel chuck as a welding rod holder. Besides poor ampacity and the large head, it's slow to swap welding rods compared to a clamp. Weld spatter sticks to steel and steel corrodes, hence the lack of steel rod holders!
If you don't have a stinger the easy, fast alternative is use mole grips/vise grips instead. Tack weld a bolt to the back or side of your vise grip head, crimp a lug on your cable (if you have no lugs you can make one in minutes from a short piece of copper plumbing tubing), drill to suit and secure to bolt with a nut.
Valla idea justo hoy se me rompió la pinza porta electrodo
É é
P
Bad idea because it is heavy
Was ist das für ein Kabel?
I find that it isn't worth to sacrify a chuck for an electrode holder ...
Muestrame la instalación eléctrica pues no aparece
Astucieux
No estás mostrando Cómo ponerle la corriente si me podrías decir cómo
Creo que esta usando una planta de soldar
You have only showed another way of doing something but how is this better?
Reinventing the wheel happens every day but the goal is to make a better wheel not one that is more costly in materials and/or time.
Cartridge??? Its called a chuck
Ma che razza di idea è? Il saldatore elettrico ce l'ha già, l'ha usato poco prima per costruire quel trespolo!! Mi pare una cosa estremamente inutile!
А ЭТО лечится?
Vitch of a sun.. 🤣🤣🤣
NICE Idea! But PLEASE, someone, EXPLAIN The ELECTRICAL CONNECTION ~ Makes No Sense. =\
Its good until you get to the end of the rod . then it'll melt the rubber and you'll have to wait till it cools down to change rods cause you for sure don't want to cool it down with water
Too much Noise, could not see full video
Грется будет
Good until you get to end of rod.HOT
What a waste! Just a $1 iron clip can do the same.
Yeah, he destroyed a drill spindle to remove the chuck, that screws on anyway! What an idiot!
Soon as I saw you chopping the chuck with an angle grinder instead of actually taking the drill apart I turned off...aint no engineer ideas here, just tripe
Não
Um
...