I have a 2013 Honda Rancher 420 4x4 with power steering and wrench on and camouflage. I love it and I would stick with Hondas all the way for reliability.
Honda will always out last all the others! I have seen artic cat and Polaris snap suspension bolts and break sections of frame. I have seen the Yamahas and Kawasaki just completely sit still when crossing a deep waterway! Honda may not make the most power with the Rincon but the ride quality and reliability on the trail is the best! In general Honda will easily last 4 times longer than any others! Im talking 20,000 miles and more out of the Hondas!!
weird how i put this video on to fall asleep watching and heard you say zona lol i’ve been there only bout an hour out from it fun park just a little small
That green Honda u said was having problems with the fuel pump is common for those atvs. Honda has a recall on them right now. My 2019 foreman done the same thing
Dude that thing is soo nice! But my opinion you need to own both, honda for water ridin and a can am for mud. But thats almost a fortune! 🤣😭 Cant wait to watch!
why not just get a snorkle kit for the outlander? i wouldnt wanna be racks deep all day but id atleast feel safe on water crossings and mud holes that are only wheel deep.
once you learn how to ride it and skim into holes more you’ll enjoy it more. i thought the same with the water but as long as it’s not 5 ft deep you’ll be fine
@@ftmikeyt i got me one about a couple months after i sent that i got a 850 outty 2022 it’s been in the shop for 4 months getting a new engine i already sunk it
Id rather have my kodiak 700 eps on 30's with fully worked clutch. More power than the honda's, simpler, lighter, nimbler and more reliable than the big twin cylinder can am and polaris's. Used to have a polaris 850 which hauled ass.
@@ftmikeyt I know from experience lol. I'd bet your rig tops 1000lbs ready to ride. I took my kodiak through a good size pond no problem. it had ruts but i kept the front up. Took my buddies 1000 high lifter through the same hole and it tipped to the side. Damn thing was too heavy for me to manhandle and I sucked water through the snorkel, bent a rod and cracked a piston. Had to rebuild the motor. It costs more to rebuild a polaris 850/1000 than it does a modern v8 from a truck.
Guy goes to a speed shop. Says I want to build a race car. Shop owner starts it off with how much are you looking to spend? Guy says 20k. Shop owner says ok so like a Honda Civic race car…
you just need to learn how to ride a can am they are way more capable then you think they are and they are definitely water bikes but definitely more of a bud bike still better then a honda 100%
You bought that atv to have fun man. Ride it sink it roll it fix it have fun with it man, parts for these are kinda cheap its the mods that are overpriced!
I have a 2013 Honda Rancher 420 4x4 with power steering and wrench on and camouflage. I love it and I would stick with Hondas all the way for reliability.
Honda will always out last all the others! I have seen artic cat and Polaris snap suspension bolts and break sections of frame. I have seen the Yamahas and Kawasaki just completely sit still when crossing a deep waterway! Honda may not make the most power with the Rincon but the ride quality and reliability on the trail is the best! In general Honda will easily last 4 times longer than any others! Im talking 20,000 miles and more out of the Hondas!!
weird how i put this video on to fall asleep watching and heard you say zona lol i’ve been there only bout an hour out from it fun park just a little small
That green Honda u said was having problems with the fuel pump is common for those atvs. Honda has a recall on them right now. My 2019 foreman done the same thing
That’s what I’ve heard but now I’ve seen it first hand!
Dude that thing is soo nice! But my opinion you need to own both, honda for water ridin and a can am for mud. But thats almost a fortune! 🤣😭 Cant wait to watch!
Honestly that may be what I need to do! Lowkey miss the Honda for water riding!!
@@ftmikeyt lol. Yeahi bet. Its so risky with the can am
why not just get a snorkle kit for the outlander? i wouldnt wanna be racks deep all day but id atleast feel safe on water crossings and mud holes that are only wheel deep.
I was thinking the same thing.
Are you still having the problem with limp mode in high Bc if so I would check with dynojet about the tune I had the same problem on my bike
Unfortunately, I just haven’t got around to reaching out to them just yet!
once you learn how to ride it and skim into holes more you’ll enjoy it more. i thought the same with the water but as long as it’s not 5 ft deep you’ll be fine
Still learning the my limits on it haha! Much different than a Honda!
u got to him some holes test the snorkels out it won’t hurt it
There was definitely a couple of those hole you could have hit .. lol I get it new bike still
There's a few haha but the majority is what I'd call Honda holes!
Top speed with them nators ?
I’ve hit close to 60 in low with them! Haven’t tried in high yet!
would they be fun at river neck looking to get a can am the honda keeps breaking on me
The power is insane!
@@ftmikeyt i got me one about a couple months after i sent that i got a 850 outty 2022 it’s been in the shop for 4 months getting a new engine i already sunk it
Yikes, hopefully you get it back soon!@@brantleyanderson2744
Id rather have my kodiak 700 eps on 30's with fully worked clutch. More power than the honda's, simpler, lighter, nimbler and more reliable than the big twin cylinder can am and polaris's. Used to have a polaris 850 which hauled ass.
I hear that, can-am and polaris are not light machines!! haha
@@ftmikeyt I know from experience lol. I'd bet your rig tops 1000lbs ready to ride. I took my kodiak through a good size pond no problem. it had ruts but i kept the front up. Took my buddies 1000 high lifter through the same hole and it tipped to the side. Damn thing was too heavy for me to manhandle and I sucked water through the snorkel, bent a rod and cracked a piston. Had to rebuild the motor. It costs more to rebuild a polaris 850/1000 than it does a modern v8 from a truck.
Oh yeah they’re not cheap when it comes to rebuilding them!
Where did you get the sound bar?
Came from the dealership with it! It's a wetsounds!
Where is this located
Guy goes to a speed shop. Says I want to build a race car. Shop owner starts it off with how much are you looking to spend? Guy says 20k. Shop owner says ok so like a Honda Civic race car…
you just need to learn how to ride a can am they are way more capable then you think they are and they are definitely water bikes but definitely more of a bud bike still better then a honda 100%
Do you still have your Honda
Negative!
Honda not most powerful but MOST reliable !!!!
I agree!
When ya gonna put that thing in some holes? There are plenty of them at Zona you can hit with it!!! Got scared since ya bought that can am lol
Just wait for this next video!!
@@ftmikeyt looking forward to it man
That my friends dad your riding with
You bought that atv to have fun man. Ride it sink it roll it fix it have fun with it man, parts for these are kinda cheap its the mods that are overpriced!
Ride that bike man don’t save it for the next guy!
Heard that!! Still learning my limits on it!
1st let’s gooo
Ayeeee!
Looks like Honda is the choice what other parks are mud tower trax doesn’t have much anymore. Burden creek maybe
Deep down your a honda guy..
Definitely miss it at times!